Effect of Blade Numbers on Aerodynamic Performance and Noise of Small Axial Flow Fan

2011 ◽  
Vol 199-200 ◽  
pp. 796-800
Author(s):  
Li Zhang ◽  
Ying Zi Jin
Keyword(s):  
Flow Field ◽  
Sound Pressure Level ◽  
Sound Pressure ◽  
Axial Flow ◽  
Aerodynamic Performance ◽  
Pressure Level ◽  
Aerodynamic Noise ◽  
Blade Number ◽  
Small Axial Flow Fan ◽  
Fan Blade

To more fully explore the effect of blade numbers on aerodynamic performance and noise of small axial flow fan, some solutions are adopted to obtain the parameters’ distribution of the flow field.Firstly, the standard k-ε turbulence model is used to calculate the steady flow field of six different fan blades(such as 5,7,9,11,13,15) , and the SIMPLE algorithm is applied to couple vecolity and pressure. Secondly, the large eddy simulation in conjunction with the FH-W noise model are used to compute the unsteady flow field and noise. Finally, the experimental results verify that the calculation methods of steady flow field and unsteady flow field are correct. The conclusions show: (1)Total pressure and efficiency generally maintain the trend of firstly increasing and then decreasing with increasing the blade numbers, and it is the greatest when fan blade number is 11. The flow rate coupled with the maximum efficiency has never changed with increasing the blade numbers. (2)With the increasing blades, overall sound pressure level of the aerodynamic noise is gradually decreasing near the outlet of fan tip, while it is firstly decreasing and then increasing before decreasing again 1 meter away from the central axis of the impeller along the outlet. When fan blade number is 11, overall sound pressure level of the aerodynamic noise is the greatest.

Experimental and Numerical Investigation of Blades Effect on Aerodynamic Performance of Small Axial Flow Fan

2011 ◽  
Author(s):  
Li Zhang ◽  
Yingzi Jin ◽  
Yi Zhao ◽  
Pin Liu
Keyword(s):  
Flow Field ◽  
Sound Pressure Level ◽  
Sound Pressure ◽  
Axial Flow ◽  
Aerodynamic Performance ◽  
Pressure Level ◽  
Aerodynamic Noise ◽  
Blade Number ◽  
Small Axial Flow Fan ◽  
Fan Blade

To explore the effect of blade numbers on aerodynamic performance and noise of small axial flow fan, the steady flow field and the unsteady flow field of fan models with 6 different blade numbers (such as 5, 7, 9, 11, 13, 15) are numerically calculated. Then the internal flow distribution, static characteristic and aerodynamic noise are analyzed among six different fan models. The analysis results show: (1)Total pressure and efficiency generally maintain the trend of first increasing and then decreasing with increasing blade numbers, and it is the maximum when fan blade number is 11. The flow rate coupled with the maximum efficiency has never changed with increasing the blade numbers. (2)With increasing blade numbers, overall sound pressure level of the aerodynamic noise is gradually decreasing near the outlet of fan tip, while it is first decreasing and then increasing before decreasing again at 1 meter away from the central axis of the impeller along the outlet. When fan blade number is 11, overall sound pressure level of the aerodynamic noise is the greatest. Furthermore, the aerodynamic performance tests of fan models with 6 different blade numbers are carried out, the results of between the tests and the numerical calculations are roughly consistent. The research results will provide the proof of the parameter optimization and the structure design for high performance and low noise small axial fans.

Analysis of the Noise Level Generated by Axial Flow Fan Composed of Radial-Bladed Centrifugal Rotor

2014 ◽  
Author(s):  
S. S. Borges ◽  
R. Barbieri ◽  
P. S. B. Zdanski
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Axial Flow ◽  
Acoustic Resonance ◽  
Pressure Level ◽  
Resonance Mode ◽  
Numerical Techniques ◽  
Cooling Systems ◽  
Centrifugal Fans ◽  
Motor Cooling

The objective of this work is to present, by means of experimental, analytical and numerical techniques that sound pressure level generated by radial-bladed centrifugal fans of electric motor cooling systems may be expressed by a logarithmical ratio of the peripheral velocity of rotor, volumetric flow and efficiency of the fan. The proposed methodology proved to be efficient and simple in the prediction of generated noise by radial-bladed centrifugal fans of TEFC motors with accuracy of ± 3 dB. In addition, the acoustic resonance mode of the fan cavity were determined by means of numerical simulations, which its results were validated through experiments using waterfall spectrum.

Study on flow field and aerodynamic noise of electric vehicle rearview mirror

2021 ◽  
pp. 095440702110228
Author(s):  
Xiaowei Hao ◽  
Zhigang Yang ◽  
Qiliang Li
Keyword(s):  
Flow Field ◽  
Proper Orthogonal Decomposition ◽  
Electric Vehicle ◽  
Sound Pressure ◽  
Pressure Level ◽  
Orthogonal Decomposition ◽  
Aerodynamic Noise ◽  
Turbulent Pressure ◽  
Rearview Mirror ◽  
Proper Orthogonal

With the development of new energy and intelligent vehicles, aerodynamic noise problem of pure electric vehicles at high speed has become increasingly prominent. The characteristics of the flow field and aerodynamic noise of the rearview mirror region were investigated by large eddy simulation, acoustic perturbation equations and reduction order analysis. By comparing the pressure coefficients of the coarse, medium and dense grids with wind tunnel test results, the pressure distribution, and numerical accuracy of the medium grid on the body are clarified. It is shown from the flow field proper orthogonal decomposition of the mid-section that the sum of the energy of the first three modes accounts for more than 16%. Based on spectral proper orthogonal decomposition, the peak frequencies of the first-order mode are 19 and 97 Hz. As for the turbulent pressure of side window, the first mode accounts for approximately 11.3% of the total energy, and its peak appears at 39 and 117 Hz. While the first mode of sound pressure accounts for about 41.7%, and the energy peaks occur at 410 and 546 Hz. Compared with traditional vehicle, less total turbulent pressure level and total sound pressure level are found at current electric vehicle because of the limited interaction between the rearview mirror and A-pillar.

Noise Reduction Analysis of Electronic Device Cooling Fan With Duct and Its Application Under Variable Working Conditions

2021 ◽  
Author(s):  
Zonghan Sun ◽  
Jie Tian ◽  
Grzegorz Liśkiewicz ◽  
Zhaohui Du ◽  
Hua Ouyang
Keyword(s):  
Noise Reduction ◽  
Working Conditions ◽  
Sound Pressure Level ◽  
Sound Pressure ◽  
Reduction Method ◽  
Axial Flow ◽  
Pressure Level ◽  
Inlet Flow ◽  
Cooling Fan ◽  
Inlet Duct

Abstract A noise reduction method for axial flow fans using a short inlet duct is proposed. The pattern of noise reduction imposed by the short inlet duct on the axial flow cooling fan under variable working conditions was experimentally and numerically examined. A 2-cm inlet duct was found to reduce tonal noise. As the tip Mach number of the fan increased from 0.049 to 0.156, the reduction in the total average sound pressure level at 1 m from the fan increased from 0.8 dB(A) to 4.3 dB(A), and further achieved 4.8 dB(A) when a 1-cm inlet duct was used. The steady computational fluid dynamics (CFD) showed that the inlet duct has little effect on the aerodynamic performance of the fan. The results of the full passage unsteady calculation at the maximum flow rate showed that the duct has a significant influence on the suction vortexes caused by the inlet flow non-uniformity. The suction vortexes move upstream to weaken the interaction with the rotor blades, which significantly reduces the pulsating pressure on the blades. The sound pressure level (SPL) at the blade passing frequency (BPF) contributed by the thrust force was calculated to reduce by 36 dB at a 135° observer angle, reflecting the rectification effect of the duct on the non-uniform inlet flow and the improvement in characteristics of the noise source. The proper orthogonal decomposition (POD) of the static pressure field on the blades verified that the main spatial mode is more uniformly distributed due to the duct, and energy owing to the rotor-inlet interaction decreases. A speed regulation strategy for the cooling fan with short inlet duct is proposed, which provides guidance for the application of this noise reduction method.

Numerical investigation of aerodynamic and acoustic characteristics of bionic airfoils inspired by bird wing

2018 ◽  
Vol 233 (11) ◽  
pp. 4004-4016 ◽  
Author(s):  
Menghao Wang ◽  
Xiaomin Liu
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Leading Edge ◽  
Pressure Level ◽  
Aerodynamic Noise ◽  
Small Scale ◽  
Airfoil Surface ◽  
Acoustic Characteristics ◽  
Bionic Coupling ◽  
Bionic Airfoil

Airfoil is the basic element of fluid machinery and aircraft, and the noise generated from that is an important research aspect. Aiming to reduce the aerodynamic noise around the airfoil, this study proposes an airfoil inspired by the long-eared owl wing and another airfoil coupled with the bionic airfoil profile, leading edge waves, and trailing edge serrations. Numerical simulations dependent on the large eddy simulation method coupled with the wall-adapting local eddy-viscosity model and the Ffowcs Williams and Hawkings equation are conducted to compare the aerodynamic and acoustic characteristics of two types of bionic airfoils at low Reynolds number condition. The simulations reveal the dipole characteristic of acoustic source and sound pressure level distribution at various frequencies. Two types of bionic airfoils show lower noise compared with the conventional NACA 0012 airfoil with a similar relative thickness of 12%. Compared with the bionic airfoil, the average value of sound pressure level at the monitoring points around the bionic coupling airfoil is decreased by 9.94 dB, meanwhile the lift-to-drag ratio also keep higher. The bionic coupling airfoil exerts a suppression of sound pressure fluctuation on the airfoil surfaces, which result from that the range and size of separation vortices are reduced and the distance between vortices and airfoil surface are increased. The tube-shaped vortices in the wake of airfoil are effectively restrained and split into small scale vortices, which are important to cause less aerodynamic noise around the bionic coupling airfoil. Consequently, a novel bionic coupling airfoil is developed with the excellent aerodynamic and acoustic performance.

Noise Prediction for Multi-Element Airfoil Based on FW-H Equation

2011 ◽  
Vol 52-54 ◽  
pp. 1388-1393
Author(s):  
Jun Tao ◽  
Gang Sun ◽  
Ying Hu ◽  
Miao Zhang
Keyword(s):  
Flow Field ◽  
Sound Pressure ◽  
Near Field ◽  
Pressure Level ◽  
Aerodynamic Noise ◽  
Noise Prediction ◽  
Far Field ◽  
Acoustic Analogy ◽  
Acoustic Information ◽  
Good Agreement

In this article, four observation points are selected in the flow field when predicting aerodynamic noise of a multi-element airfoil for both a coarser grid and a finer grid. Numerical simulation of N-S equations is employed to obtain near-field acoustic information, then far-field acoustic information is obtained through acoustic analogy theory combined with FW-H equation. Computation indicates: the codes calculate the flow field in good agreement with the experimental data; The finer the grid is, the more stable the calculated sound pressure level (SPL) is and the more regularly d(SPL)/d(St) varies.

Influence of Crosswind to Automobile Interior Aerodynamic Noise

2012 ◽  
Vol 503-504 ◽  
pp. 1164-1168
Author(s):  
Yin Zhi He ◽  
Zhi Gang Yang
Keyword(s):  
Sound Pressure Level ◽  
Pressure Fluctuation ◽  
Sound Pressure ◽  
Window Glass ◽  
Pressure Level ◽  
Aerodynamic Noise ◽  
Vehicle Interior ◽  
Side Window ◽  
Transmission Mechanisms ◽  
Yaw Angle

After a brief introduction about aerodynamic noise generation and transmission mechanisms, the influence of crosswind to vehicle interior aerodynamic noise for a production automobile sedan was investigated through full-scale aeroacoustic wind tunnel tests. Through analysis of sound pressure level of vehicle interior driver ear position and pressure fluctuation level on vehicle side window glass under different yaw angles, the following results are obtained: The frequency characteristics of vehicle interior aerodynamic noise vary as yaw angle changes under one certain wind speed. Whether on the leeside or by windward, sound pressure level increases as yaw angle goes up. Under the same yaw angle, interior noise level on the leeside is higher than that by windward. Test results between pressure fluctuation level on side window glass and vehicle interior aerodynamic noise of driver ear position show good correlation

The Influence of Blade Number Ratio and Blade Row Spacing on Axial-Flow Compressor Stator Blade Dynamic Load and Stage Sound Pressure Level

1982 ◽  
Vol 104 (3) ◽  
pp. 633-641 ◽  
Author(s):  
H. E. Gallus ◽  
H. Grollius ◽  
J. Lambertz
Keyword(s):  
Sound Pressure Level ◽  
Sound Pressure ◽  
Dynamic Pressure ◽  
Axial Flow ◽  
Fixed Number ◽  
Pressure Level ◽  
Wake Flow ◽  
Pressure Probe ◽  
Blade Row ◽  
Stator Blade

In axial-flow turbomachines considerable dynamic blade loads and noise production occur as a result of the unsteady blade row interaction between rotor and stator blades. This paper presents results of midspan measurements of the dynamic pressure distribution on the stator blade surface (fixed number of blades) for various rotor-blade numbers and various axial clearances between rotor and stator. For this purpose, one stator blade had been provided with eleven semiconductor pressure transducers in the midspan section. Simultaneously, the sound pressure level was measured at two axial distances downstream of the stator by four condensator microphones distributed along the circumference in each of the two sections and mounted flush with the wall surface. The wake-flow distribution downstream of the rotor could be obtained by a rotating three-hole pressure probe. The results of the corresponding dynamic pressure-measurements and noise measurements are discussed and compared with results from theory.

Computational investigation of noise interaction for a nano counter-rotating rotor in a static condition

2018 ◽  
Vol 07 (01n02) ◽  
pp. 1850004
Author(s):  
Zhen Liu ◽  
Chen Bu ◽  
Xiangxu Kong ◽  
Dong Yang ◽  
Bingfei Li
Keyword(s):  
Flow Field ◽  
Sound Pressure Level ◽  
Sound Pressure ◽  
Static Condition ◽  
Pressure Level ◽  
Tip Vortex ◽  
Field Analysis ◽  
Aeroacoustic Noise ◽  
Eddy Simulation ◽  
Coaxial Rotor

The interaction between the upper and lower rotors greatly influences the aeroacoustic characteristics of a counter-rotating nano-coaxial rotor. To study this influence, a numerical investigation was carried out. The unsteady flow field of a single upper rotor was first studied with a large-eddy simulation computational fluid dynamics method coupled with a sliding-mesh technique. The Ffowcs Williams–Hawking equation method was used to investigate the aeroacoustic characteristics of the upper rotor based on the flow field. An experimental setup was established to validate the computational approach. The experimental results matched well with the computational results. Additionally, results show that the peak value of the total sound pressure level appeared near the blade tip, which verified that the tip vortex was one of the most important sources of rotor noise. Then the aeroacoustic noise of the nano-coaxial rotor was studied numerically. It was found that the total sound pressure level of the nano-coaxial rotor was greater than that of the upper rotor. Flow field analysis showed that the shedding vortices of the upper rotor interacted with the lower rotor, resulting in a blade–vortex interaction. It was evident that the aeroacoustic noise was enhanced by the interference between the upper and lower rotors.

Sign in / Sign up

Export Citation Format

Share Document