Effects of Na2SO4 Concentrations on Electrodeposition of ZnO Film

2011 ◽  
Vol 236-238 ◽  
pp. 1996-1999
Author(s):  
Li Da Wang ◽  
Gui Chang Liu ◽  
Dong Feng Xue
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Zno Nanorods ◽  
Energy Dispersive ◽  
Zno Films ◽  
X Ray Diffraction ◽  
Zno Film ◽  
X Ray ◽  
Scanning Electron

The effects of Na2SO4concentrations on the electrochemical deposited ZnO films have been investigated using scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), X-ray diffraction (XRD). The results show that Na2SO4concentration plays a very important role in directing the growth of films from rod-like ZnO to plate-like zinc hydroxysulfate under fast hydroxylation. At a lower Na2SO4concentration, the ZnO nanorods tend to be produced on the substrate. At a higher Na2SO4concentration, zinc hydroxysulfate plates can be preferentially formed.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

scholarly journals The Characteristics of Padamarang Magnesite under Calcination and Hydrothermal Treatment

2019 ◽  
Vol 29 (2) ◽  
Author(s):  
Mutia Dewi Yuniati ◽  
Feronika Cinthya Mawarni Putri Wawuru ◽  
Anggoro Tri Mursito ◽  
Iwan Setiawan ◽  
Lediyantje Lintjewas
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Hydrothermal Treatment ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Magnesite (MgCO3) is the main source for production of magnesium and its compound. In Indonesia, magnesite is quite rare and can be only found in limited amount in Padamarang Island, Southeast Sulawesi Provence. Thus the properties of magnesite and the reactivity degree of the obtained product are of technological importance. The aim of this work was to analyze the characteristics of Padamarang magnesite under calcination and hydrothermal treatment processes. The processes were carried out at various temperatures with range of 150-900°C for 30 minutes. The solids were characterized with respect to their chemical and physical properties by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). SEM image indicates that magnesite was formed from thin and flat hexagon sheets. The FTIR and XRD analysis disclose that MgO formed at temperature above 300°C, where as the magnesite sample also lost its mass around 50%. These results demonstrate that Padamarang magnesite decomposes to magnesium oxide and carbon dioxide at high temperature.Magnesit (MgCO3) merupakan sumber utama untuk produksi magnesium dan senyawa-senyawanya. Di Indonesia, magnesit cukup jarang dan hanya dapat ditemukan dalam jumlah yang terbatas di Pulau Padamarang, Propinsi Sulawesi Tenggara. Oleh karena itu sifat magnesit dan derajat reaktivitas dari produk-produk magnesit penting untuk diketahui. Penelitian ini bertujuan untuk menganalisis karakteristik magnesit Padamarang dengan perlakuan kalsinasi dan hidrothermal.  Proses dilakukan pada temperatur yang bervariasi dari 150-900°C selama 30 menit. Sifat kimia dan fisika dari magnesit dikarakterisasi dengan menggunakan scanning electron microscopy dengan energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), dan X-ray diffraction (XRD). Gambar dari analisis SEM menunjukkan bahwa magnesit terbentuk dari lembaran-lembaran heksagonal yang tipis dan datar. Hasil analisis dengan FTIR dan XRD menunjukkan bahwa MgO terbentuk pada temperatur diatas 300°C, dimana sampel magnesit juga kehilangan massanya sekitar 50% pada suhu tersebut. Hal ini menunjukkan bahwa Magnesit Padamarang terdekomposisi menjadi magnesium oksida dan karbon dioksida pada temperatur tinggi.

scholarly journals Supplemental Material: Early formation and taphonomic significance of kaolinite associated with Burgess Shale fossils

2020 ◽  
Author(s):  
Ross Anderson ◽  
et al.
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Antibacterial Properties ◽  
Energy Dispersive ◽  
Burgess Shale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Early Formation ◽  
Data Tables ◽  
Scanning Electron

Supplemental methodological details, antibacterial properties of clays, other minerals with distinct fossil/matrix distributions, summaries of mineralogy by taxon, data tables, statistical summaries, and light/scanning electron microscopy–energy-dispersive X-ray spectroscopy images of fossil specimens showing X-ray diffraction selected areas.<br>

Hydrothermal Growth of ZnO Nanorods along the Ultra-Thin ZnO Seed Layer Prepared by Magnetron Sputtering

2016 ◽  
Vol 675-676 ◽  
pp. 130-133
Author(s):  
Wissawat Sakulsaknimitr ◽  
Kanyakorn Teanchai ◽  
Mati Horprathum ◽  
Chanunthorn Chananonnawathorn ◽  
Saksorn Limwichean ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Seed Layer ◽  
Treatment Process ◽  
Zno Nanorods ◽  
Annealing Treatment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron ◽  
Seed Layers

ZnO nanorods were grown on magnetron sputtered ultra-thin ZnO seed layers through a hydrothermal method. Before ZnO nanorods growth, the ultra-thin ZnO seed layer has been annealed at temperatures ranging from 100 to 400°C in air. The influence of annealing treatment on the crystalline structure of the ultra-thin ZnO seed layers has been investigated by X-ray diffraction (XRD). The size and density of final prepared ZnO nanorods were investigated by field-emission scanning electron microscopy (FE-SEM). It was found that the length and the aspect ratio of the ZnOnanorods can be readily tuned by control of the ZnO ultra-thin seeds layer which results from the annealing treatment process.

Fabrication of La Doped ZnO Nanorods via a Solvothermal Route

2009 ◽  
Vol 620-622 ◽  
pp. 529-532
Author(s):  
Tie Kun Jia ◽  
Wei Min Wang ◽  
Zheng Yi Fu ◽  
Fei Huang ◽  
Hao Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Zno Nanorods ◽  
Photocatalytic Property ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno ◽  
La Doped ◽  
Scanning Electron

La doped ZnO nanorods were synthesized via solvothermal technique using Zn(AC)2 and La(NO3)3 as starting materials. The products were characterized by X-ray diffraction (XRD), field scanning electron microscopy (FESEM) equipped with an energy dispersion X–ray (EDX) spectrometer, photoluminescence spectroscopy and UV-vis spectroscopy. The results of XRD in combination with EDS indicated that La was successful doped in ZnO. The obtained La doped ZnO sample exhibited nanorod like morphology and the diameter was about 30 nm. The photocatalytic property of La doped ZnO was evaluated by the variation of the concentration of RhB.

Sign in / Sign up

Export Citation Format

Share Document