Experimental Study on the Influence of Nozzle Diameter on Abrasive Jet Cutting Performance

2011 ◽  
Vol 337 ◽  
pp. 466-469 ◽  
Author(s):  
Yu Xian Zhang ◽  
Li Fu Wang ◽  
Fang Yao ◽  
Hong Wang ◽  
Xiao Shuang Men ◽  
...  
Keyword(s):  
Experimental Study ◽  
Particle Velocity ◽  
Abrasive Particle ◽  
Water Jet ◽  
Nozzle Diameter ◽  
Important Influence ◽  
Cutting Performance ◽  
Kerf Angle ◽  
Moving Direction ◽  
The Relationship

Waterjet abrasive nozzle is the key component for accelerating abrasive particle velocity and its diameter has important influence on water jet. The relationship between nozzle diameter and waterjet cutting performance has been studied by experiment. The results show: The incision depth and width of specimen decrease linearly with the decreasing of nozzle diameter; The linearity of jet moving direction and the size of kerf angle of specimen are independent of nozzle diameter. Under the same pressure, reducing the nozzle diameter make the penetration capability to reduce, thus, the cutting quality decrease.

Quantity judgment and the mass-count distinction across languages: Advances, problems, and future directions for research

2018 ◽  
Author(s):  
David Barner ◽  
Alan Bale
Keyword(s):  
Experimental Study ◽  
Judgment Task ◽  
Scientific Enterprise ◽  
Future Directions ◽  
Quantity Judgment ◽  
The Relationship ◽  
Linguistic Cognition

We review advances in the experimental study of the mass-count distinction and highlight problems that have emerged. First, we lay out what we see to be the scientific enterprise of studying the syntax and semantics of mass-count distinction, and the assumptions we believe must be made if additional progress is to occur, especially as the empirical facts continue to grow in number and complexity. Second, we discuss the new landscape of cross-linguistic results that has been created by widespread use of the quantity judgment task, and what these results tell us about the nature of the mass-count distinction. Finally, we discuss the relationship between the mass-count distinction and non-linguistic cognition, and in particular the object-substance distinction.

External Investigators' Follow-Up Intentions When Whistleblowers Report Healthcare Fraud: The Effects of Report Anonymity and Previous Confrontation

2020 ◽  
Vol 32 (2) ◽  
pp. 91-101
Author(s):  
Steven E. Kaplan ◽  
Danny Lanier ◽  
Kelly R. Pope ◽  
Janet A. Samuels
Keyword(s):  
Experimental Study ◽  
Early Detection ◽  
Data Availability ◽  
Medical Provider ◽  
Perceived Credibility ◽  
The Relationship ◽  
Critical Investigation

ABSTRACT Whistleblowing reports, if properly investigated, facilitate the early detection of fraud. Although critical, investigation-related decisions represent a relatively underexplored component of the whistleblowing process. Investigators are responsible for initially deciding whether to follow-up on reports alleging fraud. We report the results of an experimental study examining the follow-up intentions of highly experienced healthcare investigators. Participants, in the role of an insurance investigator, are asked to review a whistleblowing report alleging billing fraud occurring at a medical provider. Thus, participants are serving as external investigators. In a between-participant design, we manipulate the report type and whether the caller previously confronted the wrongdoer. We find that compared to an anonymous report, a non-anonymous report is perceived as more credible and follow-up intentions stronger. We also find that perceived credibility fully mediates the relationship between report type and follow-up intentions. Previous confrontation is not significantly associated with either perceived credibility or follow-up intentions. Data Availability: Data are available upon request.

scholarly journals Effect of the Rock Stress on the Water Jet Cutting Performance

2021 ◽  
Author(s):  
Battista Grosso ◽  
Valentina Dentoni ◽  
Augusto Bortolussi
Keyword(s):  
Numerical Models ◽  
Step Function ◽  
Water Jet ◽  
The State ◽  
Cutting Performance ◽  
Lagrangian Analysis ◽  
State Of Stress ◽  
Water Jet Cutting ◽  
Cutting Rate ◽  
Available Technology

AbstractUnderground quarrying is rarely adopted for granite extraction due to the difficulties in the implementation of traditional technologies (drilling and explosive). As alternative to drilling and explosive, the combination of diamond wire and water jet seems to be the most promising available technology. The cutting performance achievable with the water jet technology depends on the operative parameters, the material characteristics and the state of stress within the rock massif. To assess the effect of the state of stress on the cutting rate, laboratory tests have been performed with an oscillating water jet machine on granite samples subjected to a static load. The stress distribution in the layer of rock to be removed has been evaluated by numerical simulation with the FLAC code (Fast Lagrangian Analysis of Continua). The correlation between the results of the cutting tests and the numerical models of the rock samples has been inferred. Starting from a conceptual model, which theoretically describes the relationship between the cutting rate and the stress, a step function was defined that indicates the ranges of stress where predefined values of the cutting rate are workable.

Experimental Study on the Relationship between Dislocation Density and Internal Stress in Micro Electroforming Layer

2015 ◽  
Vol 645-646 ◽  
pp. 405-410 ◽  
Author(s):  
Chang Song ◽  
Li Qun Du ◽  
Tong Yang ◽  
Lei Luo ◽  
You Sheng Tao ◽  
...  
Keyword(s):  
Experimental Study ◽  
Dislocation Density ◽  
Internal Stress ◽  
Compressive Stress ◽  
Stress Relief ◽  
Ultrasonic Power ◽  
Pile Up ◽  
Ultrasonic Stress Relief ◽  
The Relationship ◽  
Dislocation Density Increase

In the micro electroforming process, the existence of electroforming layer defects caused by macro internal stress seriously limits the application and development of the micro electroforming technology. Currently, some studies have shown that ultrasonic can reduce the internal stress. But the formation process of the internal stress and the mechanism of ultrasonic stress relief in micro electroforming layer are still unclear now. In this paper, the relationship between dislocation density and internal stress under ultrasonic was studied. The results show that the ultrasonic can make the dislocation density increase and the compressive stress decrease. When the ultrasonic power is 200W, the dislocation density and the compressive stress culminate 3.8×10-15m-2 and-144.4MPa, respectively. The ultrasonic can excite the movement of dislocation proliferation, pile-up and opening, which leads to a micro plastic deformation in the crystal, and thereby releases the internal stress.

“Like Son, Like Father”

2020 ◽  
Vol 14 (3) ◽  
pp. 183-198
Author(s):  
David MacLachlan
Keyword(s):  
Important Influence ◽  
Karl Barth ◽  
Church Dogmatics ◽  
Theological Understanding ◽  
The Relationship

Abstract Markus Barth’s book Die Taufe: Ein Sakrament? had an evident and important influence on the development of his father Karl Barth’s theological understanding of the nature and practice of Christian baptism. This essay explores that influence, considers its scope and significance, and suggests in the course of so doing that the relationship between the elder and the younger Barth is a notable factor in what led to the provocative theology of baptism at which Karl Barth arrived in the late, fragmentary volume of the Church Dogmatics.

Sign in / Sign up

Export Citation Format

Share Document