Feasibility of Particle Jet as a Drilling Medium for the Development of Deep Complicated Oil-Gas Reservoir

2011 ◽  
Vol 361-363 ◽  
pp. 465-468 ◽  
Author(s):  
Yu Kun Du ◽  
Rui He Wang ◽  
Hong Jian Ni

The technical problems existing in deep well drilling are becoming more and more predominant during the exploration and development of oil-gas field. The poor formation drillability, low drilling rate and complicated pressure system cause the underground accidents frequent, extend well construction cycle, and make the cost of the project much higher. Therefore, it is urgent to develop new technologies to improve the efficiency of the exploration and development in deep unconventional oil-gas reservoir. The particle jet technology is a new energy-saving way which has a broad application prospect. It can take the way of sucking in particles in annulus space to cycle use the particles, and promote the drilling rate. The feasibility of particle jet as a drilling medium is verified by the theoretical and experimental study, which provides the basis for the design of particle jet tool.

2006 ◽  
Vol 46 (1) ◽  
pp. 101 ◽  
Author(s):  
K.J. Bennett ◽  
M.R. Bussell

The newly acquired 3,590 km2 Demeter 3D high resolution seismic survey covers most of the North West Shelf Venture (NWSV) area; a prolific hydrocarbon province with ultimate recoverable reserves of greater than 30 Tcf gas and 1.5 billion bbls of oil and natural gas liquids. The exploration and development of this area has evolved in parallel with the advent of new technologies, maturing into the present phase of revitalised development and exploration based on the Demeter 3D.The NWSV is entering a period of growing gas market demand and infrastructure expansion, combined with a more diverse and mature supply portfolio of offshore fields. A sequence of satellite fields will require optimised development over the next 5–10 years, with a large number of wells to be drilled.The NWSV area is acknowledged to be a complex seismic environment that, until recently, was imaged by a patchwork of eight vintage (1981–98) 3D seismic surveys, each acquired with different parameters. With most of the clearly defined structural highs drilled, exploration success in recent years has been modest. This is due primarily to severe seismic multiple contamination masking the more subtle and deeper exploration prospects. The poor quality and low resolution of vintage seismic data has also impeded reservoir characterisation and sub-surface modelling. These sub-surface uncertainties, together with the large planned expenditure associated with forthcoming development, justified the need for the Demeter leading edge 3D seismic acquisition and processing techniques to underpin field development planning and reserves evaluations.The objective of the Demeter 3D survey was to re-image the NWSV area with a single acquisition and processing sequence to reduce multiple contamination and improve imaging of intra-reservoir architecture. Single source (133 nominal fold), shallow solid streamer acquisition combined with five stages of demultiple and detailed velocity analysis are considered key components of Demeter.The final Demeter volumes were delivered early 2005 and already some benefits of the higher resolution data have been realised, exemplified in the following:Successful drilling of development wells on the Wanaea, Lambert and Hermes oil fields and identification of further opportunities on Wanaea-Cossack and Lambert- Hermes;Dramatic improvements in seismic data quality observed at the giant Perseus gas field helping define seven development well locations;Considerably improved definition of fluvial channel architecture in the south of the Goodwyn gas field allowing for improved well placement and understanding of reservoir distribution;Identification of new exploration prospects and reevaluation of the existing prospect portfolio. Although the Demeter data set has given significant bandwidth needed for this revitalised phase of exploration and development, there remain areas that still suffer from poor seismic imaging, providing challenges for the future application of new technologies.


2014 ◽  
Vol 1073-1076 ◽  
pp. 2010-2014
Author(s):  
Jian Hua Chen ◽  
Wei Hong Wang ◽  
Jun Wen Li

Oil and natural gas are very important. As reservoir geological phenomena have characteristics of complexity and nonlinearity, this paper presented a new approach of case-based reasoning with GIS to oil-gas reservoir comprehensive mapping, to which the characteristics of geological phenomena and the spatial relations among them are much considered, the reasoning is based on the attribute similarity reasoning and the spatial similarity reasoning. Experiments to the east region adjacent to Sulige gas field in north China were carried out. The results show that this approach is effective and much efficient, and it may have certain universality to similar problems or phenomena.


2011 ◽  
Vol 201-203 ◽  
pp. 438-447 ◽  
Author(s):  
Yan Han ◽  
Xue Hui Zhao ◽  
Zhen Quan Bai ◽  
Bin Wei

Through researched on corrosion factors and development progress of sour gas field in China, the development situation of sour gas field in China was defined, the types of sour gas corrosion and impact factors of hydrogen sulfide stress cracking were illustrated. The results showed that, there are many corrosion mechanisms not clear when synergistic with different factors. The 105ksi grade drill-pipe was manufactured successfully, but it’s not enough for deep-well drilling. The standard API grade drill-pipe of low yield strength and hardness were mainly used in high sour gas field development. A series of tubing & casing were research and development, and applied in many overseas oil fields successfully.


2013 ◽  
Vol 318 ◽  
pp. 513-518
Author(s):  
Hong Bo Niu ◽  
Hong Shan Zhao ◽  
Ji Fei Cao

Long Horizontal Section Well has been an important way to explore deficient oil/gas field. Relative drilling technology has developed rapidly in recent years in China. This article puts focus on the methodology of well plan, trajectory control and matched tools and application situation of drilling fluid and drilling equipment for long horizontal section well. Based on the analysis of drilling and completion technical difficulties, suitability of some well design methods such as catenary curve used to decline friction and torque have been discussed, and even more practical means proven in many designs have been recommended. After introducing the drilling capability of the long horizontal-section well, the article indicated some special characteristic of the horizontal section wells and difference from ERD wells. Consequently, some advice is given on the definition and development of the drilling technology of long horizontal section wells.


Author(s):  
Laibin Zhang ◽  
Jianchun Fan

Casing wear in the deep and ultra-deep well drilling is regarded as one of the most important technical problems in the petroleum exploration in the west of China. It is necessary to realize the casing wear mechanism for the solution of this problem. A tribo-system model for the deep section of the drilling-pipe and casing is presented based on log data and mechanics analysis in this paper. In the model the lateral vibration of the drilling-pipe is taken into account which can cause a great dynamic load on the casing. Then the tribological interaction relationships in this situation are built up. Moreover, the wear mechanism of impact-sliding contact surfaces between the casing and the tooljoints is revealed by combining theoretical analysis with the field monitoring tests. It is noticed that the surface contact fatique play a very importan role to speed up the casing wear. The results can provide guidance for actual wear prevention in the drilling engineering.


Author(s):  
E L Alekseeva ◽  
M K Kurakin ◽  
M A Kovalev ◽  
A A Lapechenkov ◽  
M L Shishkova ◽  
...  

2012 ◽  
Vol 271-272 ◽  
pp. 1328-1345
Author(s):  
Jin Li ◽  
Jian Yang Zhao

In combination with the author's experiences in design for integrated unit for natural gas field gathering and transmission, this paper describes conventional practices and technical characteristics of integrated unit in the processes of standardization design and modularization establishment and analyzes the initial application of pneumatic control ball valve, wedge-shaped flowmeter and other new technologies for surface facilities in the gas field. As a result, a new design idea is proposed in this paper, i.e., to improve the integration level of surface facilities, to minimize power consumption and maintenance works and to realize unattended work mode.


Sign in / Sign up

Export Citation Format

Share Document