Numerical Simulation of Stress and Deformation on Heat Transfer

2011 ◽  
Vol 422 ◽  
pp. 842-845
Author(s):  
Xue Ping Wang ◽  
Ying Zhang ◽  
Pan Li ◽  
Zhen Wei Zhang
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Heat Exchange ◽  
Structure Design ◽  
Stress And Strain ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Stress And Deformation

This paper primarily simulates the heat exchange part’s stress and strain situation under the load of temperature and gravity and their coupling impact aiming at obtaining the stress and deformation distribution. The authors took advantage of the method of the finite element analysis to study the stress and strain situation. Through the analysis, each part of the transfer’s stress and strain can be calculated. The conclusion of this paper provides the basis for the further enhancement of the machine life and optimization of the structure design.

Study on the Temperature Field of Jet Plug-in Hot Blast Furnace

2011 ◽  
Vol 338 ◽  
pp. 231-235
Author(s):  
Xue Ping Wang ◽  
Zhen Wei Zhang ◽  
Hong Bo Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Temperature Field ◽  
Blast Furnace ◽  
Heat Exchange ◽  
Negative Impact ◽  
Structure Design ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Hot Blast

This paper primarily focuses on the analysis on the heat exchange part’s temperature field of the jet plug-in hot blast furnace aiming at obtaining the temperature distribution of the heat exchange part. The authors took advantage of the method of the finite element analysis to study the temperature field. Through the analysis, local high temperature of the heat exchange part can be figured out. The paper also analyzes the parts with great temperature difference, study the reasons of causing these phenomenon and the negative impact on the furnace. The conclusion of this paper provides the basis for the further enhancement of the machine life and optimization of the structure design.

Experimental Platforms and Finite Element Analysis on Hot Stamping Processes

2014 ◽  
Vol 1063 ◽  
pp. 334-338 ◽  
Author(s):  
Tzu Hao Hung ◽  
Heng Kuang Tsai ◽  
Fuh Kuo Chen ◽  
Ping Kun Lee
Keyword(s):  
Heat Transfer ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Process Design ◽  
Hot Stamping ◽  
Boron Steel ◽  
Transfer Coefficients ◽  
Element Analysis ◽  
Heat Transfer Coefficients ◽  
The Finite Element Analysis

Due to the complexity of hot stamping mechanism, including the coupling of material formability, thermal interaction and metallurgical microstructure, it makes the process design more difficult even with the aid of the finite element analysis. In the present study, the experimental platforms were developed to measure and derive the friction and heat transfer coefficients, respectively. The experiments at various elevated temperatures and contact pressures were conducted and the friction coefficients and heat transfer coefficients were obtained. A finite element model was also established with the experimental data and the material properties of the boron steel calculated from the JMatPro software. The finite element simulations for the hot stamping forming of an automotive door beam, including transportation analysis, hot forming analysis and die quenching analysis were then performed to examine the forming properties of the door beam. The validation of the finite element results by the production part confirms the efficiency and accuracy of the developed experimental platforms and the finite element analysis for the process design of hot stamping.

Finite Element Analysis on Rack and Pinion of Roadheader

2013 ◽  
Vol 791-793 ◽  
pp. 718-721
Author(s):  
Man Man Xu ◽  
Yu Li ◽  
Sai Nan Xie ◽  
Qing Hua Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Spur Gear ◽  
Stress And Strain ◽  
Analysis Method ◽  
Element Analysis ◽  
The Road ◽  
The Finite Element Analysis ◽  
Gear Rack ◽  
Stress And Strain Distribution

To analyse the road-header rack and pinion by using the finite element analysis software COSMOS/WORKS. Compared to the traditional analytic calculation and numerical analysis method, it is more intuitively get 28 ° pressure angle spur gear rack meshing stress and strain distribution, which can rack and pinion improvements designed to provide scientific reference.

scholarly journals Mechanical Behavior and Damage of Zinc Coating for Hot Dip Galvanized Steel Sheet DP600

Coatings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 202
Author(s):  
Gui Li ◽  
Xiaoyu Long
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Steel Sheet ◽  
Steel Substrate ◽  
Zinc Coating ◽  
Indentation Test ◽  
Galvanized Steel ◽  
Element Analysis ◽  
The Finite Element Analysis

Advanced high strength galvanized steel sheet has been one of the dominant materials of modern automotive panels because of its outstanding mechanical properties and corrosion resistance. The zinc coating thickness of hot dip galvanized steel sheet is only about 10–20 μm, which is a discarded object on the macro level. However, it is obvious to damage and impact on stamping performance. Therefore, this paper takes zinc coating as the research object and builds its mechanical constitutive model based on a nano-indentation test and dimensional analysis theory. We separated the zinc coating from the galvanized steel substrate and constructed a sandwich material model by introducing a cohesive layer to connect the zinc coating and the steel substrate. We obtained the interface binding energy between the zinc coating and the steel substrate through the nano-scratch test. The accuracy of the model is verified by the finite element analysis of hemispherical parts. We used the five-layers element model with 0 thickness cohesive layer to simulate the zinc coating damage of galvanized steel sheet. The hemispherical part drawing experiment is used to verify the feasibility of the finite element analysis results. The results demonstrate that it is more accurate to consider the finite element numerical simulation of the zinc coating, introducing the cohesive element to simulate damage between the coating and the substrate. Drawing depth, stamping force, and the strain of the numerical simulation are closer to the experimental results.

Ladle Transportation Car Frame Finite Element Analysis

2012 ◽  
Vol 591-593 ◽  
pp. 841-844
Author(s):  
Ping Tang ◽  
Chun Hua Pan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Mechanical Design ◽  
Three Dimensional ◽  
Electrical Measurement ◽  
Stress And Strain ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
The Finite Element Analysis

Using the mechanical design of the software Solid works to established the 280 t LF the ladle furnace transportation car frame three dimensional model, and by using the finite element analysis of software Cosmos/works to static analysis for the frames, revealing that the frame of structure stress and strain distribution map of the frame, and also reveals that dangerous points and dangerous sections. Using resistance strain gauge to measure 280 t ladle transportation car frame, it is concluded that the frame of stress and strain distributions. Through the electrical measurement test the results were compared with finite element analysis results, further proof that the finite element analysis of the accuracy of the results provides theory basis for the optimization design of the frames.

Numerical Simulation of Transient Finite Deformations of Thin Beams

1983 ◽  
Vol 50 (4a) ◽  
pp. 765-769
Author(s):  
J. J. A. Rodal ◽  
D. J. Steigmann ◽  
E. A. Witmer
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Deformations ◽  
Viscoplastic Deformation ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Solution Methods ◽  
Representative Problem ◽  
Thin Beams

The formulation of the problem of finite elastic-viscoplastic deformation of thin beams is described. The finite element analysis of a representative problem is presented and various solution methods are surveyed.

scholarly journals Finite element analysis relating shape, material properties, and dimensions of taenioglossan radular teeth with trophic specialisations in Paludomidae (Gastropoda)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wencke Krings ◽  
Jordi Marcé-Nogué ◽  
Stanislav N. Gorb
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Material Properties ◽  
Stress And Strain ◽  
Plant Surface ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Force Volume ◽  
General Size

AbstractThe radula, a chitinous membrane with embedded tooth rows, is the molluscan autapomorphy for feeding. The morphologies, arrangements and mechanical properties of teeth can vary between taxa, which is usually interpreted as adaptation to food. In previous studies, we proposed about trophic and other functional specialisations in taenioglossan radulae from species of African paludomid gastropods. These were based on the analysis of shape, material properties, force-resistance, and the mechanical behaviour of teeth, when interacting with an obstacle. The latter was previously simulated for one species (Spekia zonata) by the finite-element-analysis (FEA) and, for more species, observed in experiments. In the here presented work we test the previous hypotheses by applying the FEA on 3D modelled radulae, with incorporated material properties, from three additional paludomid species. These species forage either on algae attached to rocks (Lavigeria grandis), covering sand (Cleopatra johnstoni), or attached to plant surface and covering sand (Bridouxia grandidieriana). Since the analysed radulae vary greatly in their general size (e.g. width) and size of teeth between species, we additionally aimed at relating the simulated stress and strain distributions with the tooth sizes by altering the force/volume. For this purpose, we also included S. zonata again in the present study. Our FEA results show that smaller radulae are more affected by stress and strain than larger ones, when each tooth is loaded with the same force. However, the results are not fully in congruence with results from the previous breaking stress experiments, indicating that besides the parameter size, more mechanisms leading to reduced stress/strain must be present in radulae.

scholarly journals Finite Element Analysis of the Mechanism of Traumatic Aortic Rupture (TAR)

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
JiFeng Nan ◽  
Mohammadreza Rezaei ◽  
Rashid Mazhar ◽  
Fadi Jaber ◽  
Farayi Musharavati ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Maximum Stress ◽  
Fe Simulation ◽  
Aortic Rupture ◽  
Stress And Strain ◽  
Element Analysis ◽  
Car Crash ◽  
The Finite Element Analysis ◽  
Aorta Injury

As many as 80% of patients with TAR die on the spot while out of those reaching a hospital, 30% would die within 24 hours. Thus, it is essential to better understand and prevent this injury. The exact mechanics of TAR are unknown. Although most researchers approve it as a common-sense deceleration injury, the exact detailed mechanism of TRA still remains unidentified. In this work, a deceleration mechanism of TAR was carried out using finite element analysis (FEA). The FE analysis aimed to predict internal kinematics of the aorta and assist to comprehend the mechanism of aorta injury. The model contains the heart, lungs, thoracic aorta vessel, and rib cage. High-resolution computerized tomography (HR CT scan) was used to provide pictures that were reconstructed by MIMICS software. ANSYS FE simulation was carried out to investigate the behavior of the aorta in the thoracic interior after deceleration occurred during a car crash. The finite element analysis indicated that maximum stress and strain applied to the aorta were from 5.4819e5 to 2.614e6 Pa and 0.21048 to 0.62676, respectively, in the Y-direction when the initial velocity increased from 10 to 25 m/s. Furthermore, in the X-direction when the velocity changed from 15 to 25 m/s, the stress and strain values increased from 5.17771e5 to 2.3128e6 and from 0.22445 to 0.618, respectively.

Finite Element Analysis of Multi-Ropes Friction Hoister Main Shaft

2012 ◽  
Vol 538-541 ◽  
pp. 1935-1938 ◽  
Author(s):  
Ming Xia Yan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Structure Design ◽  
Main Shaft ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Operation Conditions ◽  
The Finite Element Analysis ◽  
Optimal Designing

Three-dimensional model of the main shaft of JKM4×4 hoister was built based on Pro/E. After having applied boundary conditions and loads to the model, the finite element analysis for the main shaft was conducted under extreme operation conditions with ANSYS, the stress and displacement distribution was presented and the stress biggest hazard points were found. Based on the analysis results, improvement methods for the main shaft structure design was given out, which provides references for further optimal designing the main shaft of hoister.

Sign in / Sign up

Export Citation Format

Share Document