Design of Riveting Deformation Detective Element Based on Displacement Sensor

2012 ◽  
Vol 503-504 ◽  
pp. 1562-1565
Author(s):  
Ying Xu ◽  
Liang Wang ◽  
Yu Zhao
Keyword(s):  
Data Acquisition ◽  
Displacement Sensor ◽  
Aircraft Assembly ◽  
Measurement Results ◽  
Quality Testing ◽  
Measuring Tool

Rivet joint is a widely used connection mode in the aircraft assembly. The size of rivet deformation affect the quality of connection directly. This article design a riveting deformation detection element based on the displacement sensor. It can achieve the accurate measurement of pier diameter and height of the rivet. With adjustable measuring tool and data acquisition element, computer displays measurement measurement results, accomplishing the riveting quality testing.

ANALYSIS OF THE QUESTIONNAIRE FOR ASSESSING THE LEADERSHIP QUALITIES OF STUDENTS

2019 ◽  
Vol 5 ◽  
pp. 430
Author(s):  
Anatoly Maslak
Keyword(s):  
Latent Variables ◽  
Latent Variable ◽  
Theory Of Measurement ◽  
Interval Scale ◽  
Leadership Qualities ◽  
Wide Range ◽  
Measurement Results ◽  
Measuring Tool ◽  
Better Than

The quality of the questionnaire as a measuring tool largely determines the relevance of the results. The aim of the work is to analyze the quality of the questionnaire as a measuring tool used to evaluate the latent variable "leadership qualities of students". The study was conducted within the framework of the theory of measurement of latent variables, which has important advantages. First of all, the latent variable is determined operationally, through a set of indicators (questionnaire items), the more indicators, the higher the accuracy of the latent variable measurement. The latent variable and indicators are measured on the same interval scale in logits. This allows the use of a wide range of statistical procedures for the analysis of measurement results. The analysis of the following aspects of the quality of the questionnaire as a measuring tool: the presence of extreme indicators in the test, the compatibility of a set of indicators, the compliance of the questionnaire to the level of students on the measured latent variable, the uniformity of the distribution of indicators on the interval scale. The indicators that differentiate students with high and low levels of leadership qualities better than others are highlighted. Recommendations on the adjustment of the questionnaire as a measuring tool for assessing the leadership qualities of students are given. 

Quality Monitoring System for Seismic While Drilling

2013 ◽  
Vol 318 ◽  
pp. 572-575
Author(s):  
Li Li Yu ◽  
Yu Hong Li ◽  
Ai Feng Wang
Keyword(s):  
Data Acquisition ◽  
Monitoring System ◽  
Signal Analysis ◽  
Quality Evaluation ◽  
Quality Monitoring ◽  
Quality Of Data ◽  
Whole Process ◽  
Engineering Parameters ◽  
Network Status

In this paper a quality monitoring system for seismic while drilling (SWD) that integrates the whole process of data acquisition was developed. The acquisition equipment, network status and signals of accelerometer and geophone were monitored real-time. With fast signal analysis and quality evaluation, the acquisition parameters and drilling engineering parameters can be adjusted timely. The application of the system can improve the quality of data acquisition and provide subsequent processing and interpretation with high qualified reliable data.

Experimental Research on Vacuum Diffusion Bonding of AS-Extruded AZ61 Magnesium Alloy

2013 ◽  
Vol 788 ◽  
pp. 34-37
Author(s):  
Fei Lin ◽  
Jie Li ◽  
Hong Wei Zhao ◽  
Zhi Tong Chen ◽  
Qing Sen Meng
Keyword(s):  
Magnesium Alloy ◽  
Diffusion Bonding ◽  
Diffusion Theory ◽  
Holding Time ◽  
Atomic Diffusion ◽  
Az61 Magnesium Alloy ◽  
Measurement Results ◽  
Diffusion Temperature ◽  
Shearing Strength

Vacuum diffusion bonding of as-extruded AZ61 magnesium alloy was investigated according to atomic diffusion theory. The effects of the diffusion temperature and holding time on the quality of the bonding joint are investigated by means of microstructure analysis, shearing strength test and microhardness testing. The shearing test results showed that the maximum shearing strength reached 51.95MPa with the temperature of 470°C and the holding time of 90min. And the diffusion temperature and holding time have a great effect on the quality of the bonding joints. The microhardness measurement results showed that the microhardness value at the bonding joint was maximum.

Improvements in Data Acquisition for Propulsion Shaft Alignment

2015 ◽  
Author(s):  
W. David Joiner ◽  
Charles J. Cook
Keyword(s):  
Data Acquisition ◽  
Strain Gage ◽  
Strain Gages ◽  
Construction Process ◽  
Crucial Step ◽  
Ship Construction ◽  
Shaft Line ◽  
Load Cells ◽  
Shaft Alignment

Propulsion shaft alignment is a necessary and crucial step in the ship construction process, with manning and schedule constraints requiring accurate results as efficiently as possible. There are two methods for measuring the bearing loading along the shaft line: strain gages and load cells. The legacy method for using strain gages required a lot of man power and the legacy method for using load cells was dependent on the quality of machinist made available. Strain gages are the transducers of choice for measurement; however the data acquisition, especially for ships with long shafting systems, can require many strain gage positions and personnel to conduct tests. Load cells are used to validate the accuracy of the strain gage method and to calculate the shaft runout at each bearing location.

scholarly journals Development and evaluation of an automated system for testing current meters

2016 ◽  
Vol 20 (2) ◽  
pp. 181-187 ◽  
Author(s):  
Ezequiel Saretta ◽  
Antonio P. de Camargo ◽  
Tarlei A. Botrel ◽  
Marinaldo F. Pinto ◽  
Geancarlo T. Katsurayama ◽  
...  
Keyword(s):  
User Interface ◽  
Data Acquisition ◽  
Flow Velocity ◽  
Reference Value ◽  
Vertical Axis ◽  
Automated System ◽  
Step Motor ◽  
Simple Task ◽  
Rivers And Streams

ABSTRACT Current meters are equipment widely used for estimating flow velocity in rivers and streams. Periodic calibrations of current meters are important to ensure the quality of measurements, but the required testing facilities are complex and only available in a few institutions. However, advances in electronics and automation may contribute to developing simple and reliable calibration systems. Thus, this study aimed to develop an automated system for testing current meters, which consisted of a trapezoidal channel, a step motor, a tow car and a management system, composed of a supervisory application and microprocessed modules to control the motor and the data acquisition. Evaluations of the displacement velocity showed that it matched the reference value up to 1.85 m s-1 for a vertical-axis current meter and 2.3 m s-1 for a horizontal-axis one. The developed system showed reliability during tests, for both current meter movement and data acquisition. The management of the system based on the developed modules and the supervisory application improved its user interface, turning all the procedure into a simple task.

scholarly journals ANALISIS KUALITAS AIR TANAH AKIBAT PENGARUH SUNGAI KLAMPOK YANG TERCEMAR LIMBAH INDUSTRI DI KECAMATAN BERGAS SEMARANG JAWA TENGAH (Analysis of Groundwater Quality Due to Effect Klampok River that was Contaminated Industrial Waste in Bergas Semarang Central Java)

2020 ◽  
Vol 26 (1) ◽  
pp. 36
Author(s):  
Sepridawati Siregar ◽  
Desi Kiswiranti
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
River Water ◽  
Industrial Wastewater ◽  
The Body ◽  
Water Sampling ◽  
Central Java ◽  
Groundwater Samples ◽  
Quality Testing

AbstrakSungai Klampok mengalir melalui Kecamatan Bergas dan sekelilingnya terdapat beberapa industri sehingga mengakibatkan sungai tersebut tercemar karena menjadi badan penerima air limbah. Akibat penurunan kualitas air Sungai Klampok akan berimbas pada penurunan kualitas air tanah yang digunakan oleh penduduk sekitar sungai tersebut. Penelitian ini bertujuan untuk mengetahui kualitas air tanah yang berada di sekitar Sungai Klampok sebagai akibat adanya pengaruh beban pencemaran oleh air limbah industri berdasarkan Permenkes No. 416/MENKES/PER/IX/1990 tentang persyaratan kualitas air bersih. Lokasi pengambilan sampel air sungai dibagi menjadi 3 stasiun (LK1, LK2 dan LK3) sedangkan untuk sampel airtanah dari rumah-rumah penduduk dilakukan pada 6 titik yaitu 3 titik di daerah utara dari Sungai Klampok (U1,U2, U3) dan 3 titik di daerah selatan dari Sungai Klampok (S1,S2, S3). Pengambilan sampel dilakukan pada musim kemarau. Dari hasil uji kualitas air sungai, pencemaran yang terjadi pada air sungai Klampok masuk dalam kategori tercemar ringan-sedang. Sedangkan hasil uji kualitas air tanah masih berada di bawah baku mutu yang disyaratkan oleh Permenkes No. 416/MENKES/PER/IX/1990, sehingga penurunan kualitas air sungai Klampok tidak mempengaruhi kualitas air tanah di sekitar sungai tersebut. AbstractThe Klampok River flows through the Bergas Subdistrict and there are a number of industries around it, causing the river to become polluted because it becomes the body of the recipient of wastewater. As a result of the decline in the quality of the water in the Klampok River, it will impact on the quality of groundwater used by residents around the river. This study aims to determine the quality of groundwater around the Klampok River as a result of the influence of pollution load by industrial wastewater based on Permenkes No. 416 / MENKES / PER / IX / 1990 concerning requirements for clean water quality. The location of river water sampling is divided into 3 stations (LK1, LK2, and LK3) while for groundwater samples from residential houses is carried out at 6 points, namely 3 points in the northern area of Klampok River (U1, U2, U3) and 3 points in the area south of the Klampok River (S1, S2, S3). Sampling is done in the dry season. From the results of the test of river water quality, pollution that occurs in Klampok river water is categorized as mild-moderate polluted. While the results of groundwater quality testing are still below the quality standards required by Permenkes No. 416 / MENKES / PER / IX / 1990 so that the decline in the water quality of the Klampok river does not affect the quality of groundwater around the river.

scholarly journals Pengukuran Kualitas Informasi dengan Menerapkan Augmented Reality pada Media Promosi (Brosur) Berbasis Android

2020 ◽  
Vol 1 (4) ◽  
pp. 336-343
Author(s):  
Miftahul Madani ◽  
Arief Setyanto ◽  
Amir Fatah Sofyan ◽  
Danang Tejo Kumoro
Keyword(s):  
Augmented Reality ◽  
Analytical Method ◽  
Correlation Technique ◽  
Quality Of Information ◽  
Augmented Reality Technology ◽  
Video And Audio ◽  
Measuring Tool ◽  
Audio Information ◽  
Validation Testing

Augmented reality is a technology that is part of the development of the multimedia world that brings many ideas in various fields of promotion is no exception. The idea of using augmented reality in promotional media (brochures) that aims to improve the quality of information that is applied to the android platform one of them. The analytical method used in this study on validation testing is the product moment correlation technique, then the interval will be made as a measuring tool to determine the variable value of effectiveness, efficiency and satisfaction. The results concluded that the effectiveness variable showed at the number 59.817 on a scale > 52.85 - 61.442 which is very close to effective, the efficiency variable showed at the number 23.833 on a scale > 21.145 - 24.574 which is very close to efficient, and the satisfaction variable showed 47.417 at a scale > 42.285 - 49,142 which is very close to satisfying. Based on this, the use of augmented reality technology applied to promotional media can affect the level of quality of information and can display video and audio information on promotional media (brochures) STMIK Bumigora Mataram based on Android.

scholarly journals Applied of Alternative Business Training Models through Environmental-Based Community Empowerment for Farmer Labor

2021 ◽  
Vol 9 (5) ◽  
Author(s):  
Tenri Sau ◽  
Gufran Darma Dirawan ◽  
Ahmad Rifqi Asrib
Keyword(s):  
Training Model ◽  
Community Empowerment ◽  
Farm Workers ◽  
Knowledge Test ◽  
Business Training ◽  
Training Models ◽  
South Sulawesi ◽  
Study Results ◽  
Quality Testing

Agriculture is one of the fields that still dominates Indonesia as an agricultural country. As a substantial actor in agriculture, many farmers have not met their daily needs. This study examines the quality of alternative business training models for farmworkers using a community empowerment system. This study is part of research and development focused on product quality testing. The training model that the researcher has designed is then tested on validity, practicality, and effectiveness. The participants involved in this study were farm labourers in 2 sub-districts in Wajo Regency, South Sulawesi, Indonesia, namely Pammana and Tanasitolo sub-districts as many as 15 farm workers, two observers, and three agricultural experts. Furthermore, the instruments used in this study were: (1) validation sheet, (2) model implementation observation sheet, (3) farmworker response questionnaire, and (4) knowledge test. The data that has been collected is then analyzed quantitatively using SPSS 23.00 software. The study results show that the training model that this researcher has designed is valid, practical, and effective in increasing the knowledge of farmworkers and can be used for a broader range of users.

scholarly journals UNCERTAINTY OF MEASUREMENT RESULTS IN FUEL ANALYSES

2002 ◽  
Vol 1 (2) ◽  
Author(s):  
Paulo Roberto Guimarães Couto ◽  
Ilse Maria Guilhermino Lemos
Keyword(s):  
Mutual Recognition ◽  
Metrological Reliability ◽  
Uncertainty Of Measurement ◽  
Measurement Results ◽  
Judicial Ruling ◽  
Quality Of Products ◽  
Reliability Of Measurement Results

The result of a measurement serves as a parameter in a variety of applications, such as: the sale of products; the inspection of materials in relation to specifications/ limits set by a standard; providing support for a judicial ruling; improving the specific quality of products; estimating profitability and making comparisons with a view to mutual recognition between metrology laboratories and systems. The aim of this work is to demonstrate the relevance and applications of the ISO GUM 95 in the fuel analyses conducted by the LABCOM at the EQ/UFRJ, presenting results tables and discussions. The paper further discusses the strategic importance of metrological reliability of measurement results and of the actions of a laboratory within the context of the science of metrology in Brazil.

scholarly journals An insight into the quality of internal built environment in Vladivostok. Part 1: Studying background radiation in residential premises

2020 ◽  
pp. 28-47
Author(s):  
Vladimir A. Drozd ◽  
Valery V. Temchenko ◽  
Yuri V. Chubov ◽  
Vladimir N. Kustov ◽  
Kirill S. Golokhvast
Keyword(s):  
Built Environment ◽  
Gamma Radiation ◽  
Background Radiation ◽  
Residential Buildings ◽  
Living Environment ◽  
Research Project ◽  
Apartment Buildings ◽  
Measurement Results ◽  
Background Gamma Radiation

Introduction. The article addresses background gamma radiation in residential premises of apartment buildings in Vladivostok. This study is based on earlier research undertakings focused on the sick building syndrome (SBS), which proves its high relevance. The research is focused on the intensity of background gamma radiation in the residential premises of apartment buildings in Vladivostok. New data obtained in the course of the field experiments, the scale of their analysis, the coverage of substantive issues concerning radiation intensity and its monitoring in residential buildings guarantee the novelty of this research project. These findings also have a practical value that deals with environmental safety. Materials and methods. Onsite examinations were conducted in the form of background gamma radiation measurements taken in versatile apartment buildings, built at different times and made of different materials. Results. This section contains analytical information about the lack of influence of the location of apartment buildings on background radiation inside the apartments examined within the framework of this research project. Measurement results represent a range of values depending on construction materials used. Principal regularities, derived from the measurement results, are based on the time of operation of residential buildings, which is of practical importance. Conclusions. Patterns of influence of building parameters on background radiation inside apartments allow to assess the condition of residential buildings. Background radiation information can be entered into BIM databases and used to formulate the approach to the design of buildings and urban infrastructure so that they were focused on their residents and users. Background radiation research findings, entered into the database and contributed to design algorithms which are customized to the needs of urban residents, will enable designers to project the overall quality of the living environment encompassing the built environment analyzed in this article and other nearby buildings and structures located in Vladivostok.

Sign in / Sign up

Export Citation Format

Share Document