scholarly journals Development and evaluation of an automated system for testing current meters

2016 ◽  
Vol 20 (2) ◽  
pp. 181-187 ◽  
Author(s):  
Ezequiel Saretta ◽  
Antonio P. de Camargo ◽  
Tarlei A. Botrel ◽  
Marinaldo F. Pinto ◽  
Geancarlo T. Katsurayama ◽  
...  
Keyword(s):  
User Interface ◽  
Data Acquisition ◽  
Flow Velocity ◽  
Reference Value ◽  
Vertical Axis ◽  
Automated System ◽  
Step Motor ◽  
Simple Task ◽  
Rivers And Streams

ABSTRACT Current meters are equipment widely used for estimating flow velocity in rivers and streams. Periodic calibrations of current meters are important to ensure the quality of measurements, but the required testing facilities are complex and only available in a few institutions. However, advances in electronics and automation may contribute to developing simple and reliable calibration systems. Thus, this study aimed to develop an automated system for testing current meters, which consisted of a trapezoidal channel, a step motor, a tow car and a management system, composed of a supervisory application and microprocessed modules to control the motor and the data acquisition. Evaluations of the displacement velocity showed that it matched the reference value up to 1.85 m s-1 for a vertical-axis current meter and 2.3 m s-1 for a horizontal-axis one. The developed system showed reliability during tests, for both current meter movement and data acquisition. The management of the system based on the developed modules and the supervisory application improved its user interface, turning all the procedure into a simple task.

Determination of Traces Heavy Metals from Solid Residues Formed by Combustion of Lignite in Relation to Degree of Accessibility in Soil and Plants

2017 ◽  
Vol 68 (10) ◽  
pp. 2363-2366
Author(s):  
Delia Nica Badea
Keyword(s):  
Heavy Metals ◽  
Power Plant ◽  
Thermal Power ◽  
Reference Value ◽  
Combustion Products ◽  
Toxic Heavy Metals ◽  
Area Of Influence ◽  
Risk Potential

The paper evaluates the presence and content of traces of heavy metals Hg, Pb, Ni, Cd (total forms) from coal and solid combustion products, the degree of transfer and accessibility in the area of influence of a lignite power plant. The content of toxic heavy metals in residues are characterized by RE Meiji [ 1 (Pb and Hg) and REMeij �1 (Ni and Cd) for the filter ash. Pb and Ni content in the soil exceeds normal values, and Pb exceeds and alert value for sensitive soils around the residue deposit (70.20 mg.Kg-1). The degree of accessibility of the metals in plants (TF), reported at the Khan reference value (0.5), indicates a significant bioaccumulation level for the metals: Cd (1.9) and Hg (0.6) inside the deposit; Cd (0.39) at the base of the deposit, Hg (0.8) in the area of the thermal power plant. The trace levels of heavy metals analyzed by GFAAS and CVAAS (Hg), indicates a moderate risk potential for food safety and quality of life in the studied area.

Quality Monitoring System for Seismic While Drilling

2013 ◽  
Vol 318 ◽  
pp. 572-575
Author(s):  
Li Li Yu ◽  
Yu Hong Li ◽  
Ai Feng Wang
Keyword(s):  
Data Acquisition ◽  
Monitoring System ◽  
Signal Analysis ◽  
Quality Evaluation ◽  
Quality Monitoring ◽  
Quality Of Data ◽  
Whole Process ◽  
Engineering Parameters ◽  
Network Status

In this paper a quality monitoring system for seismic while drilling (SWD) that integrates the whole process of data acquisition was developed. The acquisition equipment, network status and signals of accelerometer and geophone were monitored real-time. With fast signal analysis and quality evaluation, the acquisition parameters and drilling engineering parameters can be adjusted timely. The application of the system can improve the quality of data acquisition and provide subsequent processing and interpretation with high qualified reliable data.

Influence Parameters Analysis of Forming Quality and System Dynamics Simulation of Vertical Steel Bar Benting

2013 ◽  
Vol 483 ◽  
pp. 280-284
Author(s):  
Xi Jian Zheng ◽  
Xin Zhuo Wang ◽  
Jin Meng Zhang ◽  
Yu Fei Zhu
Keyword(s):  
Simulation Analysis ◽  
Reference Value ◽  
Dynamics Simulation ◽  
Forming Quality ◽  
Steel Bar ◽  
New Process ◽  
Cutting Length ◽  
Bending Radius ◽  
The Relationship

The vertical steel bar bending forming is a kind of new process of bending method. The bending speed, bending radius and clamping length H which is the parameters of vertical steel bar bending machine , is directly affect the quality of bending forming parts. This paper calculated the length of reinforcement before being incised and the springback angle of bending steel bar which obtained the reasonable cutting length and bending Angle; Then based on rigid-flexible virtual prototype technology to build the dynamics model of vertical steel bar bending system. Through simulation analysis ,it obtained the relationship between bending speed, bending radius , clamping length H and forming quality of bending steel bar. In this paper, the analysis method have reference value to the design of similar steel bar bending machines.

scholarly journals Nutritional Evaluation and Risk Assessment of the Exposure to Essential and Toxic Elements in Dogs and Cats through the Consumption of Pelleted Dry Food: How Important Is the Quality of the Feed?

Toxics ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 133
Author(s):  
Ana Macías-Montes ◽  
Manuel Zumbado ◽  
Octavio P. Luzardo ◽  
Ángel Rodríguez-Hernández ◽  
Andrea Acosta-Dacal ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Inductively Coupled Plasma ◽  
Reference Value ◽  
Inorganic Elements ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Plasma Mass Spectrometry ◽  
Dry Food ◽  
Hazard Indexes

Dry feed for pets lacks specific legislation regarding maximum residue limits for inorganic elements. The aim of the present study was to determine the content of 43 inorganic elements in dog and cat feed, studying whether there were differences according to the supposed quality of the food and performing the risk assessment for health. Thirty-one and thirty packages of pelleted dry food for cats and dogs, respectively, were analyzed. After acidic microwave-assisted digestion, elements were detected and quantified by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). In general, we did not observe important differences in the content of elements according to the supposed quality of the brand. Among trace elements, selenium and manganese are above the dietary reference value. Arsenic and mercury showed the highest acute hazard indexes, which make them risk factors for the health of dogs and cats. Aluminum, uranium, antimony and vanadium contents were above the toxic reference value and showed the highest acute hazard indexes. It is necessary to improve the legislation regarding the food safety of pets, for their health and to protect the rights of consumers.

Improvements in Data Acquisition for Propulsion Shaft Alignment

2015 ◽  
Author(s):  
W. David Joiner ◽  
Charles J. Cook
Keyword(s):  
Data Acquisition ◽  
Strain Gage ◽  
Strain Gages ◽  
Construction Process ◽  
Crucial Step ◽  
Ship Construction ◽  
Shaft Line ◽  
Load Cells ◽  
Shaft Alignment

Propulsion shaft alignment is a necessary and crucial step in the ship construction process, with manning and schedule constraints requiring accurate results as efficiently as possible. There are two methods for measuring the bearing loading along the shaft line: strain gages and load cells. The legacy method for using strain gages required a lot of man power and the legacy method for using load cells was dependent on the quality of machinist made available. Strain gages are the transducers of choice for measurement; however the data acquisition, especially for ships with long shafting systems, can require many strain gage positions and personnel to conduct tests. Load cells are used to validate the accuracy of the strain gage method and to calculate the shaft runout at each bearing location.

The structure and application of an automated system for monitoring passenger traffic

2021 ◽  
Vol 14 (3) ◽  
pp. 4-11
Author(s):  
Evgeniy Anikeev
Keyword(s):  
Data Collection ◽  
General Structure ◽  
Automated System ◽  
Passenger Transport ◽  
Service Levels ◽  
Passenger Traffic ◽  
Advantages And Disadvantages ◽  
Transport Services ◽  
Transport Control

Various methods of collecting data on passenger traffic, their advantages and disadvantages are considered. It is shown that in order to improve the quality of transport services, it is necessary to regularly collect and refine data on passenger traffic. The goals and methods of obtaining information about passenger traffic in the system of municipal passenger transport are indicated. All currently existing methods are divided into three categories: data collection using technical means, data collection with the help of censors and volunteers, and interpretation of fare payments. All the methods presented in the article were compared in terms of labor intensity, costs and accuracy of the results obtained. The advantages and disadvantages of each method are considered. The general structure of an automated system for collecting data on passenger traffic is presented. The necessity of creating a centralized system for collecting and processing data associated with all passenger transport control systems has been substantiated. The tasks solved by this system at all levels of transport services for passengers are shown. Each of the tasks is assigned to one of three service levels: pre-transport, transport and post-transport. It is shown that only solving problems at all levels can ensure high-quality operation of the municipal passenger transport system.

scholarly journals Development of the Telehealth Usability Questionnaire (TUQ)

2016 ◽  
Vol 8 (1) ◽  
pp. 3-10 ◽  
Author(s):  
Bambang Parmanto ◽  
Allen Nelson Lewis, Jr. ◽  
Kristin M. Graham ◽  
Marnie H. Bertolet
Keyword(s):  
User Interface ◽  
Service Delivery ◽  
Computer Interface ◽  
Commercial Software ◽  
Telehealth Service ◽  
Computer Based

Current telehealth usability questionnaires are designed primarily for older technologies, where telehealth interaction is conducted over dedicated videoconferencing applications. However, telehealth services are increasingly conducted over computer-based systems that rely on commercial software and a user supplied computer interface. Therefore, a usability questionnaire that addresses the changes in telehealth service delivery and technology is needed.  The Telehealth Usability Questionnaire (TUQ) was developed to evaluate the usability of telehealth implementation and services.  This paper addresses: 1) the need for a new measure of telehealth usability, 2) the development of the TUQ, 3) intended uses for the TUQ, and 4) the reliability of the TUQ. Analyses indicate that the TUQ is a solid, robust, and versatile measure that can be used to measure the quality of the computer-based user interface and the quality of the telehealth interaction and services.    

scholarly journals Developing a Measuring System for Monitoring the Thickness of the 6 m Wide HDPE/LDPE Polymer Geomembrane with Its Continuous Flow Using Automation Equipment

2021 ◽  
Vol 11 (21) ◽  
pp. 10045
Author(s):  
Tatyana Nikonova ◽  
Olga Zharkevich ◽  
Essim Dandybaev ◽  
Murat Baimuldin ◽  
Leonid Daich ◽  
...  
Keyword(s):  
Continuous Flow ◽  
High Density Polyethylene ◽  
Foreign Bodies ◽  
Automated System ◽  
Measuring System ◽  
Original Design ◽  
Software Complex ◽  
Automation Equipment ◽  
Production Conditions

As a result of R&D, a measuring system for controlling the thickness of the HDPE/LDPE (high-density polyethylene/low-density polyethylene) polymer geomembrane was developed using automation equipment. The relevance of this work consists of the development of a domestic, relatively inexpensive system for controlling the thickness of the HDPE/LDPE polymer geomembrane in production conditions based on modern equipment for enterprise automation. The scientific novelty consists of the use of original design solutions in the development of hardware and software complex mechanisms that allow controlling the thickness of the HDPE/LDPE polymer geomembrane layers along the entire width of the shaft, excluding deformation of the film as a result of foreign bodies entering during extrusion, cuts, monitoring the quality of the film in real time, as well as the possibility of analyzing the measured parameters in the database of the automated system.

scholarly journals An Automated System To Replace A Human User In Conventional Laboratory Well Plate Imaging

2017 ◽  
Author(s):  
Connor Verheyen ◽  
Cornelis Rowaan ◽  
Bryan Gatto ◽  
Daniel Gizachew
Keyword(s):  
User Interface ◽  
Graphical User Interface ◽  
Human Error ◽  
Imaging System ◽  
Automated System ◽  
Prototype System ◽  
Successful Implementation ◽  
Two Dimensional ◽  
Image Capture ◽  
Automated Calibration

We here developed an automated well plate imaging system to eliminate the requirement for continuous human operation, thus freeing up the valuable time of a scientific researcher and removing the possibility of fatigue-induced human error. Specifically, we created a prototype system with programmed two-dimensional movement, automated calibration, variable plate configuration compatibility, variable path feasibility, reliable well plate image capture, and an intuitive graphical user interface. Successful implementation of our device would immediately benefit laboratory scientists, giving them more time to pursue the next biomedical breakthroughs.

scholarly journals METHOD OF EVALUATION OF FUNCTIONAL SECURITY OF INFORMATION TECHNOLOGIES FOR CREATION OF WARRANTY AUTOMATED SYSTEMS

2020 ◽  
Vol 3 (7) ◽  
pp. 153-164 ◽  
Author(s):  
Hennadii Hulak
Keyword(s):  
Information Technologies ◽  
Linear Equations ◽  
Point Of View ◽  
Automated System ◽  
Special Role ◽  
Automated Systems ◽  
Systems Of Linear Equations ◽  
Method Of Evaluation

The components of ensuring the warranty of automated systems, which are subject to increased requirements in connection with their use in many sensitive areas of public activity, including national security and defense, critical industrial technologies, energy and communications, banking, environmental protection , technologies of legitimate distance learning, etc. Certain components can significantly affect the quality and reliability of information services in regulatory conditions. In particular, the special role of the functional security of the cryptographic subsystem in terms of supporting the performance of the automated system for its tasks and functions in general, as well as in terms of ensuring the confidentiality and integrity of information. The components of the cryptographic subsystem have been identified, the poor or incorrect operation of which negatively affects the security of these subsystems. The types of the most dangerous attacks on these subsystems are analyzed, their classification from the point of view of possibility of realization in modern scientific and technical conditions and depending on capacity of available computing means and technologies on the basis of which the most real and dangerous variant of realization of remote attacks on software implementation of cryptographic subsystem is defined. . Based on the analysis, a method for evaluating the quality of cryptographic transformations based on a modified algorithm for solving the problem of finding solutions of systems of linear equations with distorted right-hand parts using the so-called decoding based on "lists" of first-order "shortened" Reed-Muller codes is proved. the correctness of the proposed algorithm.

Sign in / Sign up

Export Citation Format

Share Document