The Synthesis and Characterization of NiCo2O4 Nanoparticles

2012 ◽  
Vol 512-515 ◽  
pp. 2467-2470 ◽  
Author(s):  
Hong Xiao Zhao ◽  
Bao Ming He ◽  
Jing Li ◽  
Hui Min Jia ◽  
Li Wei Mi
Keyword(s):  
Thermal Decomposition ◽  
Hydrothermal Method ◽  
Physical Adsorption ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Preparation Methods ◽  
Oxalate Precursor ◽  
X Ray ◽  
Scanning Electron

In this paper, NiCo2O4 nanoparticles were synthesized by three different methods. The applied preparation methods in this research are thermal decomposition of a mixed oxalate precursor, combustion synthesis and hydrothermal method. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and nitrogen physical adsorption, respectively. The research found that the hydrothermal method is a promising method to prepare NiCo2O4 nanoparticles.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Rapid Synthesis and Characterization of CuInS2 Prepared Using Microwave-Assisted Heating

2015 ◽  
Vol 775 ◽  
pp. 143-146
Author(s):  
Ming Kwen Tsai ◽  
Yueh Chien Lee ◽  
Chia Chih Huang ◽  
Sheng Yao Hu ◽  
Kwong Kau Tiong ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Rapid Synthesis ◽  
X Ray ◽  
Sem Image ◽  
Microwave Assisted ◽  
Calcination Treatment ◽  
Scanning Electron

In this work, the CuInS2 nanoparticles are successfully synthesized by microwave-assisted heating technique and further calcined at 400 °C. The morphological, structural, and optical properties of the synthesized CuInS2 nanoparticles are investigated by scanning electron microscope (SEM), X-ray diffraction (XRD), Raman scattering, and transmittance measurement, respectively. The SEM image shows the clear particle shape of the calcined CuInS2 nanoparticles. After calcination treatment, the fundamental (112) peak of the XRD spectrum and a broad Raman peak mixed with chalcopyrite and CuAu structures support the improved crystallinity of the calcined CuInS2 nanoparticles.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Synthesis and Characterization of the PANI/ITO Conducting Nanocomposites

2010 ◽  
Vol 663-665 ◽  
pp. 542-545 ◽  
Author(s):  
Bing Jie Zhu ◽  
Xin Wei Wang ◽  
Mei Fang Zhu ◽  
Qing Hong Zhang ◽  
Yao Gang Li ◽  
...  
Keyword(s):  
Doping Concentration ◽  
In Situ Polymerization ◽  
Synthesis And Characterization ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Conductivity ◽  
Scanning Electron

The PANI/ITO conducting nanocomposites have been synthesized by in-situ polymerization. The obtained nanocomposites were characterized by X-ray diffraction pattern, scanning electron microscopy and Fourier transform infrared. Electrical conductivity measurements on the samples pressed into pellets showed that the maximum conductivity attained 2.0 ± 0.05 S/cm for PANI/ITO nanocomposites, at ITO doping concentration of 10 wt%. The results of the present work may provide a simple, rapid and efficient approach for preparing PANI/ITO nanocomposites.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Synthesis and Characterization of Y2O3 Nanoflowers

2012 ◽  
Vol 465 ◽  
pp. 76-79 ◽  
Author(s):  
Shuang Zhan ◽  
Xia Li
Keyword(s):  
Fourier Transform ◽  
Phase Composition ◽  
Electron Microscope ◽  
Synthesis And Characterization ◽  
The Novel ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Scanning Electron

The novel Y2O3 nanoflowers were synthesized through a facile hydrothermal method without using any catalyst or template. The phase composition and the microstructure of as-prepared products were characterized by field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD) as well as Fourier transform infrared spectrum. The formation mechanism for the Y2O3 flowers has been proposed.

Preparation and Electrical Characterization of Poly(Aniline) NanoClay Composites

2015 ◽  
Vol 34 (4) ◽  
Author(s):  
Esma Ahlatcioǧlu ◽  
Bahire Filiz şenkal ◽  
Mustafa Okutan
Keyword(s):  
Electrical Characterization ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Inorganic Hybrid ◽  
X Ray ◽  
Ft Ir ◽  
Doped Polyaniline ◽  
Poly Aniline ◽  
Scanning Electron

AbstractIn this work, synthesis and characterization of composite materials based on NanoClay(NC) and boric acid doped PolyAniline (PANI) is studied. PANI was successfully incorporated into NC to form PANI-NC composites. The resulting organic-inorganic hybrid material, PANI-NC was characterized by various physicochemical techniques. Formation of PANI inside the clay tactoid has been confirmed by X-ray diffraction studies (XRD), scanning electron microscope (SEM) and FT-IR. Also, conductivity and physical properties of the PANI-NC composites were investigated.

Synthesis and Characterization of Three Novel Nitrogen-containing Macrolides

2011 ◽  
Vol 66 (9) ◽  
pp. 930-934
Author(s):  
Xin Leng ◽  
Bingqin Yang ◽  
Yuanyuan Liu ◽  
Yi Xie ◽  
Jie Tong
Keyword(s):  
Nmr Spectroscopy ◽  
Hydrogen Bonds ◽  
1H Nmr Spectroscopy ◽  
Mass Spectra ◽  
Synthesis And Characterization ◽  
Stacking Interactions ◽  
X Ray Diffraction ◽  
Preparation Methods ◽  
X Ray

Three novel nitrogen-containing macrolides have been synthesized by esterification. All of them have been characterized by infrared (IR), elemental analysis, mass spectra (MS), and 1H NMR spectroscopy, and their crystal structures were determined by single-crystal X-ray diffraction. The preparation methods and the intermolecular associations based on C-H・・・O hydrogen bonds and π- π stacking interactions are discussed.

Synthesis and Characterization of Star-Like Copper Oxide (CuO) with Submicrometer Sizes

2012 ◽  
Vol 465 ◽  
pp. 186-191
Author(s):  
Shou Long Gong ◽  
Fang Lin Du
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Simple Liquid ◽  
Liquid Phase Deposition ◽  
Monoclinic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Star-like CuO with submicrometer sizes was fabricated via a simple liquid-phase deposition with the assistant of PVP and Na2MoO4. The as-prepared CuO have been characterized by X-ray diffraction(XRD) and scanning electron microscopy (SEM). The results showed that the as-prepared CuO owned monoclinic structure, the concentrations of PVP, Na2MoO4 and NaOH are very important to the morphology of CuO. The quality of PVP impacts the formation of thin flakes on the skeletons. Meanwhile, the growth of dendritic skeletons was depended on the addition of Na2MoO4, and the effect of NaOH is to control the dimension of CuO structure.

Synthesis and Characterization of Co Nanoparticles by Solventless Thermal Decomposition

2007 ◽  
Vol 119 ◽  
pp. 71-74 ◽  
Author(s):  
Yan Li ◽  
Xiao Li Zhang ◽  
Young Hwan Kim ◽  
Young Soo Kang
Keyword(s):  
Crystal Structure ◽  
Thermal Decomposition ◽  
Synthesis And Characterization ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Of Nanoparticles ◽  
Co Nanoparticles

Co nanoparticles were synthesized via a solventless thermal decomposition of Co2+-oleate2. The crystalline structure is strongly affected by the thermal treatment of the Co nanoparticles. Further, the annealing also results in the decomposition of surfactant around Co particles. The size of nanoparticles was confirmed by transmission electron microscopy (TEM). The crystal structure of nanoparticles was characterized by X-ray diffraction pattern (XRD). The magnetic properties were characterized by vibrating sample magnetometer (VSM).

Sign in / Sign up

Export Citation Format

Share Document