Influence of Solar Radiation of External Decorative Materials on Heat Consumption of Buildings

2012 ◽  
Vol 512-515 ◽  
pp. 2758-2761 ◽  
Author(s):  
Jian Ping Chen ◽  
Hai Rong Dong

There are many types of external decorative materials of buildings, which have different properties in absorbing, reflecting and re-radiating the solar radiation because of their different color, texture and degree of roughness. Different external decorative materials for the buildings with same direction, the amount of solar radiation will be different. The correction of heat- transferring coefficient of envelope is related not only to the direction, but also to the selected external decorative materials of buildings. In this paper, the method is to establish thermal gain or loss model of architectural envelope, to analysis the influence of solar radiation of different external decorative materials on heat consumption of buildings. Aim to provide the reference for the selection of external decorative materials in architectural design, and to improve indoor thermal comfort and reduce architectural energy consumption.

2010 ◽  
Vol 171-172 ◽  
pp. 131-135
Author(s):  
Hai Rong Dong ◽  
Jian Suo Ma ◽  
Shao Ming Qi

Solar radiation is an important factor effecting indoor thermal environment. External decorative materials of buildings have different properties in absorbing, reflecting and re-radiating the solar radiation because of their different color, texture and degree of roughness. In this paper, based on the establishment of thermal gain or loss model of architectural enveloping structure, we analyzes the influence of solar radiation of different external decorative materials on energy-saving of buildings by theoretic analysis and calculation, which provides the reference for the selection of external decorative materials in architectural design.


2019 ◽  
pp. 53-65
Author(s):  
Renata Domingos ◽  
Emeli Guarda ◽  
Elaise Gabriel ◽  
João Sanches

In the last decades, many studies have shown ample evidence that the existence of trees and vegetation around buildings can contribute to reduce the demand for energy by cooling and heating. The use of green areas in the urban environment as an effective strategy in reducing the cooling load of buildings has attracted much attention, though there is a lack of quantitative actions to apply the general idea to a specific building or location. Due to the large-scale construction of high buildings, large amounts of solar radiation are reflected and stored in the canyons of the streets. This causes higher air temperature and surface temperature in city areas compared to the rural environment and, consequently, deteriorates the urban heat island effect. The constant high temperatures lead to more air conditioning demand time, which results in a significant increase in building energy consumption. In general, the shade of the trees reduces the building energy demand for air conditioning, reducing solar radiation on the walls and roofs. The increase of urban green spaces has been extensively accepted as effective in mitigating the effects of heat island and reducing energy use in buildings. However, by influencing temperatures, especially extreme, it is likely that trees also affect human health, an important economic variable of interest. Since human behavior has a major influence on maintaining environmental quality, today's urban problems such as air and water pollution, floods, excessive noise, cause serious damage to the physical and mental health of the population. By minimizing these problems, vegetation (especially trees) is generally known to provide a range of ecosystem services such as rainwater reduction, air pollution mitigation, noise reduction, etc. This study focuses on the functions of temperature regulation, improvement of external thermal comfort and cooling energy reduction, so it aims to evaluate the influence of trees on the energy consumption of a house in the mid-western Brazil, located at latitude 15 ° S, in the center of South America. The methodology adopted was computer simulation, analyzing two scenarios that deal with issues such as the influence of vegetation and tree shade on the energy consumption of a building. In this way, the methodological procedures were divided into three stages: climatic contextualization of the study region; definition of a basic dwelling, of the thermophysical properties; computational simulation for quantification of energy consumption for the four facade orientations. The results show that the façades orientated to north, east and south, without the insertion of arboreal shading, obtained higher values of annual energy consumption. With the adoption of shading, the facades obtained a consumption reduction of around 7,4%. It is concluded that shading vegetation can bring significant climatic contribution to the interior of built environments and, consequently, reduction in energy consumption, promoting improvements in the thermal comfort conditions of users.


2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.


2013 ◽  
Vol 689 ◽  
pp. 250-253 ◽  
Author(s):  
Mohamed M. Mahdy ◽  
Marialena Nikolopoulou

The objective of this research is to study the effect of using different material specifications for the external walls on the cost of the energy consumption for achieving internal thermal comfort. We refer to this as operation running cost, which in turn is compared to initial construction cost for each type of the used external walls. In order to achieve this objective, dynamic thermal simulation were carried out for four different types of external walls – commonly used in Egypt – in two different sets of cooling: natural ventilation and mechanical means. Experiments recommend that using the Egyptian Residential Energy Code (EREC) to achieve inner thermal comfort with the minimum energy consumption (consequently the minimum CO2 emissions) and the minimum running cost as well.


Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1996
Author(s):  
Ruixin Lv ◽  
Zhongyuan Yuan ◽  
Bo Lei ◽  
Jiacheng Zheng ◽  
Xiujing Luo

A model predictive control (MPC) system with an adaptive building model based on thermal-electrical analogy for the hybrid air conditioning system using the radiant floor and all-air system for heating is proposed in this paper to solve the heating supply control difficulties of the railway station on Tibetan Plateau. The MPC controller applies an off-line method of updating the building model to improve the accuracy of predicting indoor conditions. The control performance of the adaptive MPC is compared with the proportional-integral-derivative (PID) control, as well as an MPC without adaptive model through simulation constructed based on a TRNSYS-MATLAB co-simulation testbed. The results show that the implementation of the adaptive MPC can improve indoor thermal comfort and reduce 22.2% energy consumption compared to the PID control. Compared to the MPC without adaptive model, the adaptive MPC achieves fewer violations of constraints and reduces energy consumption by 11.5% through periodic model updating. This study focuses on the design of a control system to maintain indoor thermal comfort and improve system efficiency. The proposed method could also be applied in other public buildings.


2019 ◽  
Vol 277 ◽  
pp. 02016
Author(s):  
W F M Yusoff ◽  
N H Ja'afar

Malaysia heritage buildings are the country's architectural gems. Among them is the religious building such as mosque. The Malaysia heritage mosque is normally built in response to the local culture and environment. Unlike most of Malaysia modern mosques where air conditioning is opted as ventilation mode, the heritage mosques achieve indoor thermal comfort via the passive architectural design. Due to that, this study was executed with the purpose of investigating the indoor thermal comfort of a Malaysia heritage mosque located at traditional street in Melaka, namely Masjid Tanah. The methodology used in the study was field measurement, in which the parameters measured were the indoor and outdoor air temperatures. The field measurement was conducted for two days in the end of March and early of April 2018, from 9 am to 4 pm. The indoor predicted comfort temperature was derived using the adaptive model. The findings indicated that the measured indoor air temperatures were lower than the indoor predicted comfort temperatures at most of the time. Therefore, it shows that the passive architectural design adopted by the Malaysia heritage mosque, which is Masjid Tanah, is able to provide indoor thermal comfort to the users.


2019 ◽  
Vol 11 (1) ◽  
pp. 266 ◽  
Author(s):  
Yupeng Wang ◽  
Hiroatsu Fukuda

The properties of building envelopes significantly affect indoor building energy consumption, indoor thermal comfort, and building durability. In the current standards for Japanese residential energy efficiency, insulation placement is not well regulated. Meanwhile, it is common in Japan to use air-conditioning intermittently, rather than having the units operate continuously. Therefore, considering specific Japanese lifestyles, we investigated insulation performance. In this research, we: (1) developed the interior insulation to include insulation on walls, ceilings and floors of building units (all of the interior surfaces) to achieve building energy savings by avoiding heat loss through thermal bridges; (2) discussed and demonstrated the effects of high heat capacitance for each of the building components and the thermal bridge by conducting building environmental simulations; (3) conducted simulations in seven cities in Japan and discussed the applicability of these different weather conditions; and (4) compared temperature distributions to investigate differences in indoor comfort with partial heating on winter nights. We demonstrated the energy saving and thermal comfort advantages of interior insulation. This research provides an innovative insulation style based on Japanese lifestyles that contributes to new energy-saving standards and formulations.


2012 ◽  
Vol 608-609 ◽  
pp. 1709-1715
Author(s):  
Gang Li ◽  
Zhen Li ◽  
Guo Hui Feng ◽  
Qian Liu ◽  
Qian Wang

More researchers pay attention to energy consumption and conservation in cities before .This paper finds out the current structure of rural houses, the type and utilizing situation of energy and the typical heating methods in current northen rural areas of china, and points out exist problems in these aspects by Field investigation and analysis.The author proposes that insulation layers of external walls and windows are preferred measures of energy consrevation and the additional southen sunspace is also a highly effective method in northen rural areas; the hanging kang has a much better performance than landing kang which should be strongly recommended,and a new kang with PCM helps to save fuel consumption, increase temperature uniformity of kang surface , stabilize indoor temperature and improve indoor thermal comfort,which should be paid enough attention; the effective use of excess heat in solar energy water heater should be paid sufficient attention,and biogas should be strongly advocated and properly guided.


Sign in / Sign up

Export Citation Format

Share Document