Performance Analysis of a New Type of Wind Resistance Brake Mechanism Based on FLUENT and ANSYS

2012 ◽  
Vol 562-564 ◽  
pp. 1099-1102
Author(s):  
Li Qiang Gao ◽  
Ying Xi ◽  
Qiang Fu ◽  
Mei Hua Zhu ◽  
Jin Sen Zhang
Keyword(s):  
Finite Element ◽  
High Speed ◽  
Static Load ◽  
Element Model ◽  
High Speed Train ◽  
Distribution Law ◽  
Wind Resistance ◽  
Numeric Simulation ◽  
New Type ◽  
Element Theory

Introduce a new type of non-adhesion braking mode - aerodynamic braking; Meanwhile we analyze the structure of the wind resistance brake mechanism. Based on commercial software Fluent, numeric simulation are applied to the flow field of high speed train with wind resistance brake mechanism in order to work out the pressure distribution law of wing plate and high speed train as well as wind resistance. Based on finite element theory, finite element model of wind resistance brake mechanism is built by ANSYS. Then we make static load analysis and modal analysis to the wind resistance brake mechanism. From the computation and analysis above we get some good conclusions.

Research on the Effects of Welding Sequence on Welding Residual Stress of High-Speed Train Based on SYSWELD

2011 ◽  
Vol 399-401 ◽  
pp. 1806-1811
Author(s):  
Yong Hong Chen ◽  
Peng Chen ◽  
Ai Qin Tian
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
High Speed ◽  
Element Model ◽  
Welding Residual Stress ◽  
High Speed Train ◽  
Distribution Law ◽  
Element Analysis ◽  
Welding Sequence ◽  
Maximum Residual Stress

The finite element model of the roof of aluminum high-speed train was established, double ellipsoid heat source was employed, and heat elastic-plastic theory was used to simulate welding residual stress of the component under different welding sequence based on the finite element analysis software SYSWELD. The distribution law of welding residual stress was obtained. And the effects of the welding sequence on the value and distribution of residual stress was analyzed. The numerical results showed that the simulation data agree well with experimental test data. The maximum residual stress appears in the weld seam and nearby. The residual stress value decreases far away from the welding center. Welding sequence has a significant impact on the final welding residual stress when welding the roof of aluminum body. The side whose residual stress needs to be controlled should be welded first.

scholarly journals Simulation Analysis of a Multiple-Vehicle, High-Speed Train Collision Using a Simplified Model

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Suchao Xie ◽  
Weilin Yang ◽  
Ping Xu
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
High Speed ◽  
Large Scale ◽  
Computing Time ◽  
Element Model ◽  
Vehicle Body ◽  
Railway Vehicle ◽  
Storage Space ◽  
High Speed Train

To solve the problems associated with multiple-vehicle simulations of railway vehicles including large scale modelling, long computing time, low analysis efficiency, need for high performance computing, and large storage space, the middle part of the train where no plastic deformation occurs in the vehicle body was simplified using mass and beam elements. Comparative analysis of the collisions between a single railway vehicle (including head and intermediate vehicles before, and after, simplification) and a rigid wall showed that variations in impact kinetic energy, internal energy, and impact force (after simplification) are consistent with those of the unsimplified model. Meanwhile, the finite element model of a whole high-speed train was assembled based on the simplified single-vehicle model. The numbers of nodes and elements in the simplified finite element model of the whole train were 63.4% and 61.6%, respectively, compared to those of the unsimplified model. The simplified whole train model using the above method was more accurate than the multibody model. In comparison to the full-size finite element model, it is more specific, had more rapid computational speed, and saved a large amount of computational power and storage space. Finally, the velocity and acceleration data for every car were discussed through the analysis of the collision between two simplified trains at various speeds.

Mechanical Analysis of a Cowcatcher for a High-Speed Train in Crashing

2013 ◽  
Vol 437 ◽  
pp. 18-21
Author(s):  
Song Yan Li ◽  
Zhi Jun Zheng ◽  
Ji Lin Yu
Keyword(s):  
Finite Element ◽  
Kinetic Energy ◽  
Finite Element Model ◽  
High Speed ◽  
Element Model ◽  
Rigid Wall ◽  
Mechanical Analysis ◽  
Front Part ◽  
High Speed Train ◽  
Car Crashes

A finite element model of a cowcatcher mounted at the front of a high-speed train is established and the processes when the head car crashes a rigid wall or an obstacle at different speeds are simulated by using ANSYS/LS-DYNA software. The results show that with the cowcatcher the passenger deceleration would decrease and the kinetic energy can be absorbed more quickly when the head car crashes a rigid wall. When a train crashes an obstacle on the track at a low speed, say 10m/s, the obstacle is turned up, which may destroy upper structures of the train. When the speed is high, say 50m/s, the obstacle will crash into the cowcatcher and the kinetic energy of the train will be absorbed by the front part of the cowcatcher.

Durability Analysis of the Reduction Gear for High Speed Train Considering Driving Histories

2012 ◽  
Vol 586 ◽  
pp. 269-273
Author(s):  
Chul Su Kim ◽  
Gil Hyun Kang
Keyword(s):  
Fatigue Life ◽  
High Speed ◽  
Element Model ◽  
Rolling Stock ◽  
Reduction Gear ◽  
High Speed Train ◽  
Analysis Software ◽  
Tractive Effort ◽  
Durability Analysis ◽  
The Finite Element Model

To assure the safety of the power bogies for train, it is important to perform the durability analysis of reduction gear considering a variation of velocity and traction motor capability. In this study, two types of applied load histories were constructed from driving histories considering the tractive effort and the train running curves by using dynamic analysis software (MSC.ADAMS). Moreover, this study was performed by evaluating fatigue damage of the reduction gears for rolling stock using durability analysis software (MSC.FATIGUE). The finite element model for evaluating the carburizing effect on the gear surface was used for predicting the fatigue life of the gears. The results showed that the fatigue life of the reduction gear would decrease with an increasing numbers of stops at station.

Simulation of Excavation Process for Deep Foundation Pit Base on Nonlinear Finite Element Theory

2015 ◽  
Vol 744-746 ◽  
pp. 579-583
Author(s):  
Hui Min Wang ◽  
Zhen Jian Ji ◽  
Liang Cao ◽  
Ji Yao ◽  
Shan Guang Qian
Keyword(s):  
Finite Element ◽  
Safety Evaluation ◽  
Nonlinear Finite Element ◽  
Distribution Law ◽  
Deep Foundation ◽  
Foundation Pit ◽  
Simulation Research ◽  
Deep Foundation Pit ◽  
Excavation Process ◽  
Element Theory

Deep Pit is the main content of modern urban geotechnical engineering. In this paper, based on a deep foundation pit engineering as an example, based on the nonlinear finite element theory, conduct a numerical simulation research for foundation pit excavation process. Obtained the distribution law of pit deformation, stress distribution and the supporting structure of the internal forces, under the various processes. These provide a theoretical basis for safety evaluation of foundation pit engineering.

The structural optimization of roadheader conical picks based on fatigue life

2018 ◽  
Vol 09 (02) ◽  
pp. 1850013 ◽  
Author(s):  
Zhenguo Lu ◽  
Lirong Wan ◽  
Qingliang Zeng ◽  
Xin Zhang ◽  
Kuidong Gao
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Static Analysis ◽  
Element Model ◽  
Cutting Resistance ◽  
Strength Failure ◽  
New Type ◽  
Conical Picks ◽  
Fatigue Life Analysis ◽  
The Finite Element Model

Conical picks are the key cutting components used on roadheaders, and they are replaced frequently because of the bad working conditions. Picks did not meet the fatigue life when they were damaged by abrasion, so the pick fatigue life and strength are excessive. In the paper, in order to reduce the abrasion and save the materials, structure optimization was carried out. For static analysis and fatigue life prediction, the simulation program was proposed based on mathematical models to obtain the cutting resistance. Furthermore, the finite element models for static analysis and fatigue life analysis were proposed. The results indicated that fatigue life damage and strength failure of the cutting pick would never happen. Subsequently, the initial optimization model and the finite element model of picks were developed. According to the optimized results, a new type of pick was developed based on the working and installing conditions of the traditional pick. Finally, the previous analysis methods used for traditional methods were carried out again for the new type picks. The results show that new type of pick can satisfy the strength and fatigue life requirements.

scholarly journals Comparative Analysis of Static Loading Performance of Rigid and Flexible Road Wheel based on Finite Element Method

2020 ◽  
Vol 70 (1) ◽  
pp. 41-46
Author(s):  
Yaoji Deng ◽  
Youqun Zhao ◽  
Mingmin Zhu ◽  
Zhen Xiao ◽  
Qiuwei Wang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Static Loading ◽  
Maximum Stress ◽  
Three Dimensional ◽  
Element Model ◽  
Vertical Load ◽  
New Type ◽  
Stress And Deformation ◽  
Nonlinear Finite Element Model

To overcome the shortcomings of traditional rigid road wheel, such as poor damping effect and low load-bearing efficiency, a new type of flexible road wheel, having a unique suspension-bearing mode, was introduced. The three-dimensional nonlinear finite element model of rigid and flexible road wheel, considering the triple nonlinear characteristics of geometry, material and contact, is established for numerical investigation of static loading performance. The accuracy of the finite element model of the rigid and flexible road wheel is verified by static loading experiment. The static loading performance of the rigid and flexible road wheels is numerically analyzed. The influence of vertical load on maximum stress and deformation of the rigid and flexible wheels is also studied. The results show that the contact pressure uniformity of the flexible road wheel is better than that of the rigid road wheel under the static vertical load, but the maximum stress and deformation of the flexible road wheel are greater than that of the rigid road wheel. However, this problem can be solved by increasing the number of hinge sets and optimising the joints. The research results provide theoretical basis for replacing rigid road wheel with flexible road wheel, and also provide reference for structural optimisation of flexible road wheel.

Sign in / Sign up

Export Citation Format

Share Document