Special Combustion Chamber in the Cylinder of Diesel Engine Working Process Simulation Analysis Based on the FIRE Software

2012 ◽  
Vol 562-564 ◽  
pp. 595-598
Author(s):  
Jian Ying Dai ◽  
Xiao Wei Wu ◽  
Chun Yan Shi
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Combustion Process ◽  
Internal Combustion ◽  
Gas Pressure ◽  
Gas Temperature ◽  
Working Process ◽  
Vehicle Noise ◽  
Combustion Theory ◽  
Exhaust Noise

Exhaust noise is the main component of vehicle noise in the study of vehicle noise controlling. It is important to design a type of muffler that can match to engine and have the capability to reduce vehicle noise. At present vehicle mufflers are made by examination, therefore the time of product development is very long and it wastes material. Sometimes exhaust noise can not be reduced; in the contrary it will decrease the power of engine. The content of exhaust noise is tightly related to the temperature, pressure and velocity of combustion gas. In order to obtain the detail data of these parameters, FIRE software is used to perform the calculation of engine combustion process in this paper. FIRE is one of the advanced 3D simulation software packages and can simulate the complicated gas flowing and combustion in internal combustion engine cylinder. Its calculation result accesses to the fact and can attain gas temperature, gas pressure and gas velocity, provide reliable original data for the design of a muffler. In this paper, the basic combustion theory of internal combustion engine is introduced to the basis for the further application of numerical simulation, firstly. The geometrical model and mesh model of a type internal combustion engine are constructed by using FIRE software to analyze the working process of internal combustion engine. Based on the model and combustion theory, the relevant calculation model and initial parameters are chosen and applied into the software. A load case is designed according to the true running process of this engine. With these load cases, the combustion process is simulated in this paper. The detail distribution of the parameters such as combusted gas pressure, combusted gas temperature and velocity of the flow fields in cylinder is obtained and the relation of these parameters and crankshaft angle is given for the further research. It also provides data for muffler design by boundary element method. It is obvious that can shorten the product developing cycle and save the material.

Analysis and Research of the Combustion Process of YN4100QB Diesel Engine

2013 ◽  
Vol 744 ◽  
pp. 35-39
Author(s):  
Lei Ming Shi ◽  
Guang Hui Jia ◽  
Zhi Fei Zhang ◽  
Zhong Ming Xu
Keyword(s):  
Diesel Engine ◽  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Optimization Design ◽  
Combustion Engine ◽  
Geometric Model ◽  
Combustion Process ◽  
Internal Combustion ◽  
Engine Combustion ◽  
Exhaust Noise

In order to obtain the foundation to the research on the Diesel Engine YN4100QB combustion process, exhaust, the optimal design of combustion chamber and the useful information for the design of exhaust muffler, the geometric model and mesh model of a type internal combustion engine are constructed by using FIRE software to analyze the working process of internal combustion engine. Exhaust noise is the main component of automobile noise in the study of controlling vehicle noise. It is primary to design a type of muffler which is good for agricultural automobile engine matching and noise reduction effect. The present car mufflers are all development means. So it is bound to cause the long cycle of product development and waste of resources. Even sometimes not only can it not reach the purpose of reducing the noise but also it leads to reduce the engine dynamic. The strength of the exhaust noise is closely related to engine combustion temperature and pressure. The calculation and initial parameters are applied to the software based on the combustion model and theory. According to the specific operation process of internal combustion engine. Five kinds of common operation condition was compiled. It is obtained for the detailed distribution parameters of combusted gas temperature pressure . It is also got for flow velocity of the fields in cylinder and given for the relation of the parameters and crankshaft angle for the further research. At the same time NOx emissions situation are got. The numerical results show that not only does it provide the 3D distribution data in different crank shaft angle inside the cylinder in the simulation of combustion process, but also it provides a basis for the engine combustion ,emission research, the optimization design of the combustion chamber and the useful information for the designs of muffler.

scholarly journals Recovery of Exhaust Waste Heat for ICE Using the Beta Type Stirling Engine

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Wail Aladayleh ◽  
Ali Alahmer
Keyword(s):  
Internal Combustion Engine ◽  
Waste Heat ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Stirling Engine ◽  
Gas Temperature ◽  
Ic Engine ◽  
Exhaust Waste Heat ◽  
Useful Power ◽  
Shaft Power

This paper investigates the potential of utilizing the exhaust waste heat using an integrated mechanical device with internal combustion engine for the automobiles to increase the fuel economy, the useful power, and the environment safety. One of the ways of utilizing waste heat is to use a Stirling engine. A Stirling engine requires only an external heat source as wasted heat for its operation. Because the exhaust gas temperature may reach 200 to 700°C, Stirling engine will work effectively. The indication work, real shaft power and specific fuel consumption for Stirling engine, and the exhaust power losses for IC engine are calculated. The study shows the availability and possibility of recovery of the waste heat from internal combustion engine using Stirling engine.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

scholarly journals A quick, simplified approach to the evaluation of combustion rate from an internal combustion engine indicator diagram

2008 ◽  
Vol 12 (1) ◽  
pp. 85-102 ◽  
Author(s):  
Miroljub Tomic ◽  
Slobodan Popovic ◽  
Nenad Miljic ◽  
Stojan Petrovic ◽  
Milos Cvetic ◽  
...  
Keyword(s):  
Internal Combustion Engine ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Gas Temperature ◽  
Compression Ignition Engine ◽  
Practical Applications ◽  
Simplified Approach

In this paper a simplified procedure of an internal combustion engine in-cylinder pressure record analysis has been presented. The method is very easy for programming and provides quick evaluation of the gas temperature and the rate of combustion. It is based on the consideration proposed by Hohenberg and Killman, but enhances the approach by involving the rate of heat transferred to the walls that was omitted in the original approach. It enables the evaluation of the complete rate of heat released by combustion (often designated as ?gross heat release rate? or ?fuel chemical energy release rate?), not only the rate of heat transferred to the gas (which is often designated as ?net heat release rate?). The accuracy of the method has been also analyzed and it is shown that the errors caused by the simplifications in the model are very small, particularly if the crank angle step is also small. A several practical applications on recorded pressure diagrams taken from both spark ignition and compression ignition engine are presented as well.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

scholarly journals Analytical Approach to the Exergy Destruction and the Simple Expansion Work Potential in the Constant Internal Energy and Volume Combustion Process

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 395
Author(s):  
Jeongwoo Song ◽  
Han Ho Song
Keyword(s):  
Internal Combustion Engine ◽  
Analytical Approach ◽  
Combustion Engine ◽  
Combustion Process ◽  
Internal Combustion ◽  
Thermodynamic System ◽  
Exergy Destruction ◽  
Engine Operation ◽  
System Temperature ◽  
Simple Expansion

The exergy destruction due to the irreversibility of the combustion process has been regarded as one of the key losses of an internal combustion engine. However, there has been little discussion on the direct relationship between the exergy destruction and the work output potential of an engine. In this study, an analytical approach is applied to discuss the relationship between the exergy destruction and efficiency by assuming a simple thermodynamic system simulating an internal combustion engine operation. In this simplified configuration, the exergy destruction during the combustion process is mainly affected by the temperature, which supports well-known facts in the literature. However, regardless of this exergy destruction, the work potential in this simple engine architecture is mainly affected by the pressure during the combustion process. In other words, if these pressure conditions are the same, increasing the system temperature to reduce the exergy destruction does not lead to an increase in the expansion work; rather, it only results in an increase in the remaining exergy after expansion. In a typical internal combustion engine, temperatures before combustion timing must be increased to reduce the exergy destruction, but increasing pressure before combustion timing is a key strategy to increase efficiency.

scholarly journals An optical method for measuring exhaust gas pressure from an internal combustion engine at high speed

2017 ◽  
Vol 88 (12) ◽  
pp. 125004 ◽  
Author(s):  
Felix C. P. Leach ◽  
Martin H. Davy ◽  
Dmitrij Siskin ◽  
Ralf Pechstedt ◽  
David Richardson
Keyword(s):  
Internal Combustion Engine ◽  
Optical Method ◽  
High Speed ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Gas Pressure ◽  
Exhaust Gas

scholarly journals The accuracy of modelling of the thermal cycle of a compresion ignition engine

2011 ◽  
Vol 144 (1) ◽  
pp. 37-48
Author(s):  
Karol CUPIAŁ ◽  
Wojciech TUTAK ◽  
Arkadiusz JAMROZIK ◽  
Arkadiusz KOCISZEWSKI
Keyword(s):  
Numerical Analysis ◽  
Internal Combustion Engine ◽  
Thermal Cycle ◽  
Fuel Injection ◽  
Combustion Engine ◽  
Combustion Process ◽  
Three Dimensional ◽  
Internal Combustion ◽  
Power Generator ◽  
Ci Engine

The results of numerical analysis the combustion process in turbocharged CI engine 6CT107 are presented in the paper. Engine was installed on the ANDORIA’s power generator of 100 kVA/80 kW. The results of modelling the combustion process for different angle setting fuel injection, compared with the results obtained by indicating the real engine. Numerical analysis was performed in two programs, designed for three-dimensional modelling of the thermal cycle the piston internal combustion engine, namely AVL FIRE and the KIVA-3V.

Sign in / Sign up

Export Citation Format

Share Document