Analysis on Rock Mass Around an Underground Crude Oil Storage Caverns in Containment of Groundwater Considering Fluid Solid Coupling

2012 ◽  
Vol 588-589 ◽  
pp. 1918-1921
Author(s):  
Shang Yang Yang ◽  
Long Yun Zhang
Keyword(s):  
Rock Mass ◽  
Crude Oil ◽  
Water Pressure ◽  
Triaxial Compression ◽  
Compression Tests ◽  
Oil Storage ◽  
Excavation Process ◽  
The Stability ◽  
Seepage Law ◽  
Petroleum Storage

Triaxial compression tests have been performed to determine the properties of the rock mass around an unlining underground crude oil storage caverns which is the first one in China. The execution situation of the tunnel project and the seepage law of groundwater are taken into account; the stress and the seepage field around the tunnel in different working states are simulated by applying Comsol around a underground crude oil storage caverns.According to the test results, it was found that the excavation process may arise the local damage,the extension of the excavation induced loose zone ranges from 0 to 15.6 m, depending on the buried depth of the caverns. According to numerical simulation results, the crown settlement and stress concentration is depended on the buried depth and the water pressure distribution after the excavation of the main cavity. This research results can provide the reference for analysis on the stability of the underground cavities under low stress level and on the water sealed underground petroleum storage rock caverns.

Stability Study on Jointed Rock Mass Affected by Fissure Water Pressure

2014 ◽  
Vol 624 ◽  
pp. 577-581
Author(s):  
Wei Qiang Xue ◽  
Wei Shen Zhu ◽  
Jin Wei Fu ◽  
Chao Jia ◽  
Shuai Guo
Keyword(s):  
Rock Mass ◽  
Water Pressure ◽  
Engineering Application ◽  
Jointed Rock ◽  
Stability Study ◽  
Strong Impact ◽  
Excavation Process ◽  
Initiation And Propagation ◽  
The Stability ◽  
Fissure Water

Joints and fissures have a strong impact on the stability of engineering rock mass. In this paper, a self-improved analysis program of FLAC3D is adopted to study problems in fluid-solid coupling field. Then, by simulating the excavation process of a slope under the effect of fissure water pressure, the crack initiation and propagation in engineering rock mass reappears. Besides, the numerical simulation results are decent and effective, which can provide some references for engineering application.

Hydro-Mechanical Coupled Analysis of the Stability of Surrounding Rock Mass of Underground Water-Sealed Oil Storage

2013 ◽  
Vol 405-408 ◽  
pp. 402-405 ◽  
Author(s):  
Yun Jie Zhang ◽  
Tao Xu ◽  
Qiang Xu ◽  
Lin Bu
Keyword(s):  
Rock Mass ◽  
Underground Water ◽  
Surrounding Rock ◽  
Comsol Multiphysics ◽  
Coupled Analysis ◽  
Coupling Theory ◽  
Oil Storage ◽  
Stability Of Surrounding Rock ◽  
Straight Wall ◽  
The Stability

Based on the fluid-solid coupling theory, we study the stability of surrounding rock mass around underground oil storage in Huangdao, Shandong province, analyze the stress of the surrounding rock mass around three chambers and the displacement change of several key monitoring points after excavation and evaluate the stability of surrounding rock mass using COMSOL Multiphysics software. Research results show that the stress at both sides of the straight wall of cavern increases, especially obvious stress concentration forms at the corners of the cavern, and the surrounding rock mass moves towards the cavern after excavation. The stress and displacement of the surrounding rock mass will increase accordingly after setting the water curtains, but the change does not have a substantive impact on the stability of surrounding rock mass.

Static response of fly ash columnar improved ground

2001 ◽  
Vol 38 (2) ◽  
pp. 276-286 ◽  
Author(s):  
A Porbaha ◽  
T BS Pradhan ◽  
T Kishida
Keyword(s):  
Fly Ash ◽  
Stress Concentration ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Triaxial Compression ◽  
Area Ratio ◽  
Stress Redistribution ◽  
Soft Ground ◽  
Compression Tests ◽  
Composite Ground

This study presents the results of a series of monotonic undrained triaxial compression tests on clay specimens improved by columnar reinforcement. The process of loading and stress redistribution of a fly ash – clay specimen (FCS), in comparison with a sand–clay specimen (SCS), is examined in terms of stress–strain characteristics, generation of excess pore-water pressure, effective and total earth pressures, development of stress concentration, and the normalized undrained shear strength of the improved soil. It was found, predictably, that the deviator stress of the composite specimens was influenced by the consolidation stress, replacement area ratio, and properties of the column material. The stress concentration at the top of the composite ground which depends on the loading stage reaches a peak after the consolidation state and is reduced due to stress redistribution between the column and the soft ground. In terms of improvement effects, the mean shear strengths of FCS and SCS relative to the clay specimen are three and seven times greater, respectively, for a replacement area ratio of 49%.Key words: composite ground, fly ash, soil improvement, soft ground, triaxial test.

scholarly journals Sensitivity Analysis in the Estimation of Mechanical Parameters of Engineering Rock Mass Based on the Hoek–Brown Criterion

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Zhiqiang Li ◽  
Guofeng Liu ◽  
Shuqian Duan ◽  
Shufeng Pei ◽  
Changgen Yan
Keyword(s):  
Rock Mass ◽  
Triaxial Compression ◽  
Damage Zone ◽  
Surrounding Rock ◽  
Geological Strength Index ◽  
Sensitivity Factor ◽  
Mechanical Parameters ◽  
Compression Tests ◽  
Disturbance Factor

Geological strength index GSI, disturbance factor (D), material constant mi, and uniaxial compressive strength σci of the intact rock are essential input parameters IPs of the Hoek–Brown H−B criterion. Mechanical parameters MPs of the engineering rock mass, including elastic modulus E, cohesion c, and internal friction angle φ estimated by the H–B criterion, and the predicted excavation response of surrounding rock, including the displacement and excavation damage zone EDZ based on the MPs, are of high relevance with the four IPs of the H–B criterion. In this paper, the deep and huge underground cavern excavated in basalt from a hydropower station under construction in the southwest of China is used to analyse the sensitivity of the IPs on the MPs, the displacement, and EDZ of the surrounding rock mass. Firstly, the H–B criterion is applied to estimate the MPs, among which the IPs are obtained from a series of in situ and laboratory tests, including borehole camera observation, wave velocity test, uniaxial and triaxial compression tests, and so on. Secondly, the sensitivity relationships between IPs, MPs, and prediction results of displacement and EDZ are established and described quantitatively by the sensitivity factor (si). Results show that the MPs of the rock mass are more sensitive to GSI and D⋅GSI and σci are high-sensitivity parameters affecting the displacement and EDZ. Finally, the variations in the estimated MPs and associated prediction results concerning excavation response, which are caused by the uncertainties in the determination of the IPs, are further quantified. This study provides a straightforward assessment for the variability of the rock mass parameters estimated by the H–B criterion. It also gives a valuable reference to similar geotechnical engineering for the determination of rock mass parameters in the preliminary design.

Stability Analysis about the Impact of Soft Rock to the Underground Cavern Group

2013 ◽  
Vol 706-708 ◽  
pp. 560-564
Author(s):  
Yi Huan Zhu ◽  
Guo Jian Shao ◽  
Zhi Gao Dong
Keyword(s):  
Finite Element ◽  
Rock Mass ◽  
Stability Analysis ◽  
Soft Rock ◽  
Element Model ◽  
Underground Excavation ◽  
Power Station ◽  
Excavation Process ◽  
The Stability ◽  
The Impact

Soft rock is frequently encountered in underground excavation process. It is difficult to excavate and support in soft rock mass which has low strength, large deformation and needs much time to be out of shape but little time to be self-stabilized. Based on a large underground power station, finite element model analysis was carried out to simulate the excavation process and the results of displacement, stress and plasticity area were compared between supported and unsupported conditions to evaluate the stability of the rock mass.

Research on Seepage Field in Fractured Rock Mass of Underground Oil Storage Cave Using Distinct Element Method

2013 ◽  
Vol 353-356 ◽  
pp. 619-623
Author(s):  
Song Yu ◽  
Yun Peng Zhang ◽  
Wei Shen Zhu
Keyword(s):  
Rock Mass ◽  
Fractured Rock ◽  
Distinct Element ◽  
Water Pressure ◽  
Hydraulic Pressure ◽  
Fractured Rock Mass ◽  
Water Curtain ◽  
Oil Storage ◽  
Underground Caverns ◽  
Element Method

The distribution of hydraulic pressure in fractured rock mass surrounding caverns after excavation and technique of stochastic generation of joint network are investigated based on discrete element method. In order to seal the oil in underground caverns with water in the actual engineering, a water curtain with water pressure is installed, and the changes of hydraulic pressure are simulated with a series of curtain pressures. It is shown that some joints that have been drained out during excavation can not be saturated if the water curtain pressure is less than a certain value. Water curtain pressure with a certain value gives a strong safe guarantee of saving oil in the underground petroleum storage caverns.

True Shear Parameters of Saturated Clays

1973 ◽  
Vol 10 (4) ◽  
pp. 652-663
Author(s):  
A. Sridharan ◽  
S. Narasimha Rao
Keyword(s):  
Stress Level ◽  
Pore Water Pressure ◽  
Initial Conditions ◽  
Water Pressure ◽  
Triaxial Compression ◽  
Compression Tests ◽  
Strength Parameters ◽  
Test Procedures ◽  
Stress History ◽  
Triaxial Compression Tests

Ever since Hvorslev proposed a failure criterion incorporating intrinsic parameters, several test procedures have come into practice to determine these ‘true’ strength parameters. Several consolidated undrained triaxial compression tests with pore water pressure measurement were conducted on both montmorillonite and kaolinite clays and the results were analyzed using different existing methods. All the methods through which the data were analyzed fail to assign any unique true strength parameters. Even a particular method yields different values depending upon the initial conditions (stress history, water content) of the sample and stress level during testing. It has been reasoned that these variations are due to the probable differences in fabric between the samples which are involved in various methods. There seems to be a unique linear relationship between tan [Formula: see text] and Cc/pe irrespective of the sample state, stress level, and stress history in both undisturbed and remolded conditions for all the procedures adopted.

Sign in / Sign up

Export Citation Format

Share Document