Study on Technology of Fully-Mechanized Sub-Level Caving Mining Technology in the Datong Permo Carboniferous Coal Seam

2012 ◽  
Vol 616-618 ◽  
pp. 565-568
Author(s):  
Bin Yu ◽  
Jun Zhao ◽  
Hong Chun Xia
Keyword(s):  
Coal Seam ◽  
Mining Area ◽  
Hard Coal ◽  
Control Technology ◽  
Mining Technology ◽  
Hard Roof ◽  
Sublevel Caving ◽  
Seam Mining ◽  
Longwall Top Coal Caving ◽  
And Control

This thesis briefly introduced roof control technology in fully-mechanized sublevel caving mining with hard roof and hard coal seam, Mining technology , gas prevention and comprehensive prevention and control technology in spontaneous combustion of coal, which in longwall top-coal caving face with hydraulic support in thickness seam in the Datong permo carboniferous coal seam . New development directions of fully-mechanized sublevel caving mining technology in the Datong mining area in the next few years.

scholarly journals Failure Mechanism and Control Technology of Thick and Soft Coal Fully Mechanized Caving Roadway under Double Gobs in Close Coal Seams

2020 ◽  
Vol 2020 ◽  
pp. 1-23
Author(s):  
Shengrong Xie ◽  
Xiaoyu Wu ◽  
Dongdong Chen ◽  
Yaohui Sun ◽  
En Wang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Field Distribution ◽  
Control Technology ◽  
Coal Seams ◽  
Anchor Bolt ◽  
Anchor Cable ◽  
Coal Pillars ◽  
Seam Mining ◽  
And Control

The surrounding rock of the roadway under double gobs in the lower coal seams is partially damaged by the mining of the upper coal seam and the stress superimposition of the stepped coal pillars. What is worse, the upper layer of the roof is collapse gangue in double gobs, which makes the anchor cable unable to anchor the reliable bearing layer, so the anchoring performance is weakened. The actual drawing forces of the anchor bolt and anchor cable are only approximately 50 kN and 80 kN, respectively. The roadway develops cracks and large deformations with increasing difficulty in achieving safe ventilation. In view of the above problems, taking the close coal seam mining in the Zhengwen Coal Mine as the engineering background, a theoretical calculation is used to obtain the loading of the step coal pillars and the slip line field distribution of the floor depth. The numerical simulation monitors the stress superimposition of stepped coal pillars and the distribution of elastoplastic areas to effectively evaluate the layout of mining roadways. The numerical simulation also analyzes the effective prestress field distribution of the broken roof and grouting roof anchor cable. A laboratory test was used to monitor the strength of the grouting test block of the broken coal body. Then, we proposed that grouting anchor cable be used to strengthen the weak surface of the roof and block the roof cracks. From on-site measurement, the roadway was seen to be arranged in the lateral stress stabilization area of the stepped coal pillars, the combined support technology of the grouting anchor cable (bolt) + U type steel + a single prop was adopted, the roadway deformation was small, the gas influx was reduced, and the drawing force of the anchor bolt and the anchor cable was increased to approximately 160 kN and 350 kN, respectively. The overall design and control technology of the roadway can meet the site safety and efficient production requirements.

Water inflow characteristics of coal seam mining aquifer in Yushen mining area, China

2021 ◽  
Vol 14 (4) ◽  
Author(s):  
Zhao Chunhu ◽  
Jin Dewu ◽  
Wang Qiangmin ◽  
Wang Hao ◽  
Li Zhixue ◽  
...  
Keyword(s):  
Coal Seam ◽  
Mining Area ◽  
Water Inflow ◽  
Seam Mining

scholarly journals Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

2019 ◽  
Vol 2019 ◽  
pp. 1-13
Author(s):  
Shengrong Xie ◽  
Xiaoyu Wu ◽  
Dongdong Chen ◽  
Yaohui Sun ◽  
Junchao Zeng ◽  
...  
Keyword(s):  
Longwall Mining ◽  
Control Process ◽  
Coal Pillar ◽  
Main Roof ◽  
Control Effect ◽  
Mining Technology ◽  
Thick Coal Seam ◽  
Immediate Roof ◽  
Seam Mining ◽  
And Control

Automatic roadways on gob-side entry retaining with no-pillars are used for longwall mining technology. The mining technology with no-pillars can recover coal pillar resources and reduce the amount and cost of roadway excavations. Automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is adopted for the condition of thick immediate roof and medium-thick coal seam mining, cutting off the immediate roof and the main roof on the gob by combined support. The fractured roof forms gangue blocks to fill the gob and loads the overlying strata. The gangue control system is placed on the roadside, which controls the caving gangue to form a gangue rib. In this paper, the viewpoints and key technologies (the roof-cutting technology, the reinforcement and support technology, the gangue rib control technology, and the auxiliary support technology) of automatic roadway technology for cutting roofs by combined support on the gob-side entry retaining with no-pillars are introduced. Furthermore, the formation and control process are explained. The numerical simulation is used to simulate and analyze the roof hanging and the roof cutting structures. In addition, a field engineering test is performed. The field test shows that automatic roadway technology for cutting roofs by combined support on gob-side entry retaining with no-pillars is feasible. This process uses construction techniques and technologies to meet on-site production needs. The combined support has high resistance strength and is shrinkable. In engineering applications, the combined support has a low damage rate. The deformation of the automatic roadway with gob-side entry retaining is small, and the control effect is significant.

scholarly journals A Mechanical Model of the Overlying Rock Masses in Undersea Coal Mining and a Stress-Seepage Coupling Numerical Simulation

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Jie Fang ◽  
Lei Tian ◽  
Yanyan Cai ◽  
Zhiguo Cao ◽  
Jinhao Wen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Coal Mining ◽  
Water Inrush ◽  
Mining Area ◽  
Analysis Model ◽  
Fractured Zones ◽  
Working Face ◽  
Seam Mining ◽  
Overlying Strata

The water inrush of a working face is the main hidden danger to the safe mining of underwater coal seams. It is known that the development of water-flowing fractured zones in overlying strata is the basic path which causes water inrushes in working faces. In the engineering background of the underwater mining in the Longkou Mining Area, the analysis model and judgment method of crack propagation were created on the basis of the Mohr–Coulomb criterion. Fish language was used to couple the extension model into the FLAC3d software, in order to simulate the mining process of the underwater coal seam, as well as to analyze the initiation evolutionary characteristics and seepage laws of the fractured zones in the overlying strata during the advancing processes of the working face. The results showed that, during the coal seam mining process, the mining fractured zones which had been caused by the compression-shear and tension-shear were mainly concentrated in the overlying strata of the working face. Also, the open-off cut and mining working face were the key sections of the water inrush in the rock mass. The condition of the water disaster was the formation of a water inrush channel. The possible water inrush channels in underwater coal mining are mainly composed of water-flowing fractured zones which are formed during the excavation processes. The numerical simulation results were validated through the practical engineering of field observations on the height of water-flowing fractured zone, which displayed a favorable adaptability.

scholarly journals Calculation Method of Overburden Damage Height Based on Fracture Mechanics Analysis of Soft and Hard Rock Layers

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-15 ◽  
Author(s):  
Liang Chen ◽  
Shaowu Fan ◽  
Can Zhao ◽  
Lang Zhang ◽  
Zhiheng Cheng
Keyword(s):  
Fracture Mechanics ◽  
Coal Seam ◽  
Calculation Method ◽  
Hard Rock ◽  
Soft Rock ◽  
Mining Area ◽  
Overburden Rock ◽  
Rock Interaction ◽  
Mechanics Analysis ◽  
Seam Mining

Under the geological condition of soft and hard rock interaction stratum, the overburden damage height can provide a quantitative support for the design of the locations of gas drainage boreholes in the roof mining fracture zone and the determination of the hydraulic fracture zone in coal seam mining. The interbedded structure of overlying mud rock and sandstone in the Lu’an mining area in Shanxi is a typical soft and hard rock interaction stratum. In view of the lack of soft rock fracture mechanics analysis and the improper calculation of the damage height of overburden rock caused by constant rock residual bulking coefficient to be used regularly in the analysis, in this paper, we constructed a fracture model of soft and hard strata by giving a quantitative classification criterion of soft and hard rocks and introducing a fracture failure criterion of soft rock strata and the space constraint condition of broken-expansion rock formation. Aiming at improving the calculation precision of overburden damage height, we presented a calculation method based on fracture mechanics analysis of soft and hard strata, which could delineate the extent of intact rock in overlying strata from bottom to top to determine the damage height of overburden rock. This research took Yuwu coal mine in Lu’an mining area as an example. Results showed that (1) by the calculation method, the overburden damage height of the N1102 fully mechanized caving face in Yuwu coal mine was 51.44 m, which was less than the value obtained by an actual borehole TV method as well as the numerical simulation result of 53.46 m, with a calculation accuracy about 96.22%, which is quite high for both. The calculation accuracy of the proposed method was higher than that of the three conventional theoretical methods, and it effectively solved the limitation of the fracture analysis method without the inclusion of the soft rock layer in design and the distortion problem due to the residual bulking coefficient to be improperly used in simulation. (2) There was no noticeable fractures in the broken soft rock zone, and the whole fractures were mainly low-angle rupture; the fractures in hard rock layer had obvious ruptures and multiangle cracks, and the average fracture width of soft rock was 2.8 mm smaller than that of hard rock. The fracture modes of soft rock and hard rock were mainly tensile failure and tensile shear failure, which verified the correctness of the fracture mechanics model of soft and hard rock layers constructed in this paper. (3) It is noticed that the tensile strength of rock in this method needs to be obtained through rock mechanics experiment on overlying strata in the study area, and our proposed method was applicable to the mining conditions of near horizontal coal seam. The calculation accuracy of this method meets the engineering error requirements and can be applied to the prediction of overburden damage height in near horizontal coal seam mining.

Research and Practice of Safe Mining Technology in Steeply Inclined Coal Seam under Complicated Geological Conditions

2012 ◽  
Vol 203 ◽  
pp. 509-513
Author(s):  
Xiang Ren ◽  
Rong Zhao ◽  
Xiao Li Chui
Keyword(s):  
Coal Seam ◽  
Coal Face ◽  
Mining Technology ◽  
Current State ◽  
Production Safety ◽  
Geological Conditions ◽  
New Ideas ◽  
Mining Coal ◽  
Cutting Height ◽  
And Control

Based on the analysis of the current state of mining in steeply inclined coal seam, combination with the mining status of the 3up 509 fully mechanized mining coal face with a max 28°inclination and a high cutting height,The key technologies was Study on the anti-sliding of coal face equipment, ends and advance support, water prevention and control as well as other key technology of steeply inclined coal seam, Good technical and economic results achieved in actual production,Support capability of production safety in mine enhanced,This article Opened up new avenues and new ideas for the promotion of mechanized mining technology under similar geological conditions.

Sign in / Sign up

Export Citation Format

Share Document