Performance and Emission Characteristics of Low Heat Rejection Diesel Engine Fuelled with Rice Bran Oil Biodiesel

2013 ◽  
Vol 768 ◽  
pp. 245-249 ◽  
Author(s):  
G. Arunkumar ◽  
A. Santhoshkumar ◽  
M. Vivek ◽  
L. Anantha Raman ◽  
G. Sankaranarayanan ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Inlet Valve ◽  
Heat Rejection ◽  
Performance And Emission ◽  
Piston Cylinder ◽  
Spray Method ◽  
Test Engine

In this study, the performance and exhaust emissions of a biodiesel fuelled low heat rejection (LHR) direct injection Diesel engine have been investigated experimentally and compared with the results of standard diesel engine without any coatings. Piston, cylinder head, exhaust and inlet valve of test engine were coated with 0.5 mm thickness of zirconia through plasma spray method. Biodiesel used in the testing was prepared from rice bran oil through transesterification process.

Biofuel (Cooking Oil) Blends Contribution in DI Diesel Engine – Performance & Emission Study

2014 ◽  
Vol 984-985 ◽  
pp. 839-844
Author(s):  
Natesan Kanthavelkumaran ◽  
P. Seenikannan
Keyword(s):  
Diesel Engine ◽  
Rice Bran ◽  
Diesel Fuel ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Research Work ◽  
Engine Performance ◽  
Performance And Emission ◽  
Emission Study ◽  
Ci Engines

In present scenario researchers focusing the alternate sources of petroleum products. Based on this, current research work focused the emission study of its characteristics and potential as a substitute for Diesel fuel in CI engines. Current research biodiesel is produced by base catalyzed transesterification of rice bran oil is known as Rice Bran Oil Methyl Ester (Biofuel). In this research various proportions of Biofuel and Diesel are prepared on volume basis. It is used as fuels in a four stroke single cylinder direct injection Diesel engine to study the performance and emission characteristics of these fuels. Varieties of results obtained, that shows around 50% reduction in smoke, 33% reduction in HC and 38% reduction in CO emissions. In result discussion a different blends of the brake power and BTE are reduced nearly 2 to 3% and 3 to 4% respectively around 5% increase in the SFC. Therefore it is accomplished from the this experimental work that the blends of Biofuel and Diesel fuel can successfully be used in Diesel engines as an alternative fuel without any modification in the engine. It is also environment friendly blended fuel by the various emission standards.

Effect of Combustion Chamber Design on the Performance and Emission Characteristics of a Direct Injection (DI) Diesel Engine Fuelled With Refined Rice Bran Oil Blends

2004 ◽  
Author(s):  
A. Samuel Raja ◽  
G. Lakshmi Narayana Rao ◽  
N. Nallusamy ◽  
M. Selva Ganesh Kumar
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Spherical Shape ◽  
Experimental Investigations ◽  
Emission Characteristics ◽  
Performance And Emission ◽  
Piston Bowl

The present work deals with the experimental investigations on the effect of refined rice bran oil and its blends with diesel on performance and emission characteristics of diesel engine with different combustion chamber geometry. The engine was tested with various neat vegetable oils and it was found that with refined rice bran oil the performance and emission characteristics were comparable with that of neat diesel. The K- factor of the combustion chamber geometry (ratio of the piston bowl volume to the clearance volume) was maintained at 0.74. The D/d ratio (ratio of piston crown diameter to piston bowl diameter) was altered to achieve re-entrant and torroidal shapes from spherical shape. Tests were carried out for each blend, with particular geometry of combustion chamber. Results with different combustion chamber geometry and different blends have been compared.

Experimental investigation of the combustion characteristics of a biodiesel (rice-bran oil methyl ester)-fuelled direct-injection transportation diesel engine

2007 ◽  
Vol 221 (8) ◽  
pp. 921-932 ◽  
Author(s):  
S Sinha ◽  
A K Agarwal
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Vegetable Oils ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Pressure Rise ◽  
Cylinder Pressure ◽  
Biodiesel Blends ◽  
Crank Angle

Increased environmental awareness and depletion of fossil petroleum resources are driving industry to develop alternative fuels that are environmentally more acceptable. Transesterified vegetable oil derivatives called ‘biodiesel’ appear to be the most convenient way of utilizing bio-origin vegetable oils as substitute fuels in diesel engines. The methyl esters of vegetable oils do not require significant modification of existing engine hardware. Previous research has shown that biodiesel has comparable performance and lower brake specific fuel consumption than diesel with significant reduction in emissions of CO, hydrocarbons (HC), and smoke but slightly increased NO x emissions. In the present experimental research work, methyl ester of rice-bran oil is derived through transesterification of rice-bran oil using methanol in the presence of sodium hydroxide (NaOH) catalyst. Experimental investigations have been carried out to examine the combustion characteristics in a direct injection transportation diesel engine running with diesel, biodiesel (rice-bran oil methyl ester), and its blends with diesel. Engine tests were performed at different engine loads ranging from no load to rated (100 per cent) load at two different engine speeds (1400 and 1800 r/min). A careful analysis of the cylinder pressure rise, heat release, and other combustion parameters such as the cylinder peak combustion pressure, rate of pressure rise, crank angle at which peak pressure occurs, rate of pressure rise, and mass burning rates was carried out. All test fuels exhibited similar combustion stages as diesel; however, biodiesel blends showed an earlier start of combustion and lower heat release during premixed combustion phase at all engine load-speed combinations. The maximum cylinder pressure reduces as the fraction of biodiesel increases in the blend and, at higher engine loads, the crank angle position of the peak cylinder pressure for biodiesel blends shifted away from the top dead centre in comparison with baseline diesel data. The maximum rate of pressure rise was found to be higher for diesel at higher engine loads; however, combustion duration was higher for biodiesel blends.

Performance and Emission Evaluation of Low Heat Rejection Direct Injection Diesel Engine Fueled by Diesel–Turpentine Oil Blends

2010 ◽  
Author(s):  
K. Anandavelu ◽  
N. Alagumurthi ◽  
C. G. Saravanan
Keyword(s):  
Diesel Engine ◽  
Vegetable Oil ◽  
Vegetable Oils ◽  
Diesel Fuel ◽  
Direct Injection ◽  
High Energy ◽  
Promising Alternative ◽  
Heat Rejection ◽  
Performance And Emission ◽  
Direct Injection Diesel Engine

Light Vegetable oils are a promising alternative among the different diesel fuel alternatives. Using Light Vegetable oils in diesel engine is not a new idea. The Vegetable oils have high energy content. However, the high viscosity, poor volatility and cold flow characteristics of vegetable oils can cause some problems such as severe engine deposits, piston ring sticking and thickening of lubrication oil due to long-term use in diesel engines. Diesel fueled engine have the disadvantage of producing Smoke, Particulate Matter and Nitrogen Oxides and are now subjected to increasingly severe legislation of Emission norms. The required levels are difficult to achieve through engine design alone. Even with high-grade fuels, catalytic systems are being extensively investigated to reduce the diesel engine emission. But there are still difficulties in operation of these. This leads to replacement of diesel fuel with renewable fuels has been set target worldwide to reduce the diesel exhaust pollution. The energy of the light vegetable oil can be released more efficiently with the concept of low heat rejection (LHR) engine. The aim of the study is to apply LHR engine for improving the engine performance and reducing the emission when light vegetable oil (turpentine oil) is used as an alternate fuel. The work was carried out in two stages. In first Stage, the turpentine oil (20, 40, 60, 80 & 100, v/v) with diesel blends used in direct injection diesel engine and to identify best blend with respect to performance and emission. In second Stage, the work has been carried out by the converting direct injection diesel engine in to a LHR engine and the effects of different blends of turpentine oil (20, 40, 60, 80 & 100, v/v) with diesel fuel used in LHR engine and its performance, emission and combustion characteristics have been investigated experimentally. From the experimental investigation, the combination of LHR engine with blended fuels shows the better performance when compared to diesel engine. The smoke density decreases for the diesel engine (without LHR) whereas with the effect of LHR, Oxides of Nitrogen will be reduced and heat release rate also reduces.

Comparative Performance, Emission, and Combustion Characteristics of Rice-Bran Oil and Its Biodiesel in a Transportation Diesel Engine

2010 ◽  
Vol 132 (6) ◽  
Author(s):  
Avinash Kumar Agarwal ◽  
Atul Dhar
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Rice Bran ◽  
Heat Release Rate ◽  
Release Rate ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Pressure Rise ◽  
Combustion Characteristics ◽  
Comparative Performance

The methyl esters of vegetable oils known as biodiesel are becoming increasingly popular because of their low environmental impact and potential as a green alternative fuel for diesel engines. Methyl ester of rice-bran oil (RBOME) is prepared through the process of transesterification. In the present investigation, experiments have been carried out to examine the performance, emission, and combustion characteristics of a direct-injection transportation diesel engine running with diesel, 20% blend of rice-bran oil (RBO), and 20% blend of RBOME with mineral diesel. A four-stroke, four-cylinder, direct-injection transportation diesel engine (MDI 3000) was instrumented for the measurement of the engine performance, emissions, in-cylinder pressure-crank angle history, rate of pressure rise, and other important combustion parameters such as instantaneous heat release rate, cumulative heat release rate, mass fraction burned, etc. A careful analysis of the performance, emissions, combustion, and heat release parameters has been carried out. HC, CO, and smoke emissions for RBO and RBOME blends were lower than mineral diesel while NOx emissions were almost similar and brake specific fuel consumption (BSFC) was slightly higher than mineral diesel. Combustion characteristics were quite similar for the three fuels.

Experimental Investigation on the Performance and Emission Characteristics of Direct Injection Medium Duty Transport Diesel Engine Using Rice-Bran Oil Biodiesel

2007 ◽  
Author(s):  
Shailendra Sinha ◽  
Avinash Kumar Agarwal
Keyword(s):  
Experimental Investigation ◽  
Diesel Engine ◽  
Rice Bran ◽  
Rice Bran Oil ◽  
Emission Characteristics ◽  
Emission Data ◽  
Biodiesel Blends ◽  
Performance And Emission ◽  
Fuel Blends ◽  
Full Throttle

Over the past several years, there has been increased interest in alternative diesel fuels to control emissions and provide energy security. Biodiesel is a fuel that can be made from renewable biological sources such as vegetable oils and animal fats, has been recognized as an environment friendly alternative to mineral diesel. In present investigation, rice bran oil (non-edible) was transesterified to methyl ester and reaction conditions for transesterifcation process for rice bran oil were optimized. Various properties like viscosity, density, flash point, calorific value of the biodiesel thus prepared are characterized as per ASTM norms (ASTM D6751) and found comparable to diesel. Steady state engine dynamometer test at full throttle conditions have been carried out to evaluate the performance and emission characteristics of a medium duty transportation DI diesel engine. Engine was fuelled with various blends of rice-bran oil biodiesel (ROME) and mineral diesel ranging from 5% biodiesel to 100% biodiesel (5, 10, 20, 30, 50, and 100%). Performance and emission data were compared to the baseline data obtained using mineral diesel. Same engine without any hardware modification has been adopted for tests on all fuel blends. The results of this experimental investigation showed that biodiesel and biodiesel blends exhibited almost similar torque and power characteristics. Biodiesel blends up to 20% produced slightly higher torque and improved performance. Improvement in fuel conversion efficiency was found for lower concentration blends i.e. up to 20%. Lowest efficiency was found for 100% biodiesel blend. All the biodiesel blends emitted lower total hydrocarbon, carbon monoxide emissions and smoke opacity but slightly higher NOx emissions during the full throttle tests. Emission tests with all the fuel blends have also been carried out using European 13 MODE test (ECE R49) procedure. Drastic reduction in THC and CO and slight increase in NOx was observed.

Combustion Characteristics of Rice Bran Oil Derived Biodiesel in a Transportation Diesel Engine

2006 ◽  
Author(s):  
Shailendra Sinha ◽  
Avinash Kumar Agarwal
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Rice Bran ◽  
Heat Release Rate ◽  
Release Rate ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Pressure Rise ◽  
Combustion Characteristics ◽  
Experimental Investigations

The methyl esters of vegetable oils, known as biodiesel are becoming increasingly popular because of their low environmental impact and potential as a green alternative fuel for diesel engines. They do not require significant modification in existing engine hardware. Methyl ester of rice bran oil (ROME) is prepared through the process of transesterification. Previous research has shown that ROME has comparable performance, lower bsfc in comparison to diesel. There was reduction in the emissions of CO, HC, and smoke but NOx emissions increased. In the present research, experimental investigations have been carried out to examine the combustion characteristics of a direct injection transportation diesel engine running with diesel, and 20% blend of ROME with diesel. A four-stroke, four-cylinder, direct-injection transportation diesel engine (MDI 3000) was fully instrumented for the measurement of combustion pressure, rate of pressure rise and other combustion parameters such as instantaneous heat release rate, cumulative heat release rate, mass fraction burned etc. Tests were performed at different loads ranging from no load to 100%, at constant engine speed. No engine hardware modification was carried out for the present study. A careful analysis of combustion and heat release parameters has been carried out, which gives precise information about the in-cylinder combustion of rice bran oil based biodiesel vis-a`-vis mineral diesel.

scholarly journals Combustion and emission characteristics of diesel engine fuelled with rice bran oil methyl ester and its diesel blends

2008 ◽  
Vol 12 (1) ◽  
pp. 139-150 ◽  
Author(s):  
Rao Gattamaneni ◽  
Saravanan Subramani ◽  
Sampath Santhanam ◽  
Rajagopal Kuderu
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Heat Release ◽  
Vegetable Oils ◽  
Rice Bran ◽  
Ignition Delay ◽  
Rice Bran Oil ◽  
Direct Injection ◽  
Engine Fuel ◽  
Maximum Heat

There has been a worldwide interest in searching for alternatives to petroleum-derived fuels due to their depletion as well as due to the concern for the environment. Vegetable oils have capability to solve this problem because they are renewable and lead to reduction in environmental pollution. The direct use of vegetable oils as a diesel engine fuel is possible but not preferable because of their extremely higher viscosity, strong tendency to polymerize and bad cold start properties. On the other hand, Biodiesels, which are derived from vegetable oils, have been recently recognized as a potential alternative to diesel oil. This study deals with the analysis of rice bran oil methyl ester (RBME) as a diesel fuel. RBME is derived through the transesterification process, in which the rice bran oil reacts with methanol in the presence of KOH. The properties of RBME thus obtained are comparable with ASTM biodiesel standards. Tests are conducted on a 4.4 kW, single-cylinder, naturally aspirated, direct-injection air-cooled stationary diesel engine to evaluate the feasibility of RBME and its diesel blends as alternate fuels. The ignition delay and peak heat release for RBME and its diesel blends are found to be lower than that of diesel and the ignition delay decreases with increase in RBME in the blend. Maximum heat release is found to occur earlier for RBME and its diesel blends than diesel. As the amount of RBME in the blend increases the HC, CO, and soot concentrations in the exhaust decreased when compared to mineral diesel. The NOx emissions of the RBME and its diesel blends are noted to be slightly higher than that of diesel.

Sign in / Sign up

Export Citation Format

Share Document