Research on Preparation of Nano-Hydroxyapatite Biological Material

2013 ◽  
Vol 791-793 ◽  
pp. 303-306
Author(s):  
Yong Guang Bi ◽  
Xu Si Xu
Keyword(s):  
Particle Size ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Ph Value ◽  
Spherical Shape ◽  
Temperature Reaction ◽  
Hydroxyapatite Nanoparticles ◽  
Uniform Size ◽  
Regular Shape ◽  
Particle Sample

In order to obtain hydroxyapatite nanoparticles smaller particle size distribution is relatively uniform, spherical shape and the particle sample, by exploring the reaction temperature, reaction time, concentration and pH on hydroxyapatite nanosize and distribution impact conditions, the results show that when the reaction temperature is 50°C; reaction time 2h; concentration 0.6mol/L; pH value of 10, the prepared nanohydroxyapatite regular shape, less agglomeration, uniform size high crystallinity. Description concentration and pH on nanoparticle size has a significant impact.

Enhanced Photocatalytic Performance and Mechanism of Ag3PO4 Particles Synthesized via a Sonochemical Process

2018 ◽  
Vol 10 (3) ◽  
pp. 337-345 ◽  
Author(s):  
Chengxiang Zheng ◽  
Hua Yang ◽  
Yang Yang ◽  
Haimin Zhang
Keyword(s):  
Particle Size ◽  
Photocatalytic Activity ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Ph Value ◽  
Dye Degradation ◽  
Sonochemical Method ◽  
Simulated Sunlight ◽  
Spherical Nanoparticles ◽  
Direct Oxidation

A facile sonochemical method was used to synthesize Ag3PO4 particles and the effect of pH value, reaction temperature and reaction time on the products was investigated. It is found that the samples prepared at neutral (pH = 7) and alkaline (pH = 11) environments exhibit a similar particle morphology and size. The particles are shaped like spheres with a size distribution majorly focusing on a range of 200–450 nm, and the average particle size is about 300 nm. The sample prepared at acidic environment (pH = 3) is composed of polyhedral microparticles with size of 5–8 μm. At relatively low temperatures of 20–50 °C, the spherical nanoparticles do not undergo obvious morphology/size changes; however, when the temperature is increased up to 80 °C, the nanoparticles are aggregated to form large-sized polyhedral microparticles in the size range of 4–7 μm. Compared to the pH value and reaction temperature, the reaction time has a minor effect on the morphology of Ag3PO4 particles. RhB was chosen as the target pollutant to evaluate the photocatalytic activity of the as-prepared Ag3PO4 samples under simulated-sunlight irradiation. It is shown that the samples consisting of spherical nanoparticles exhibit an extremely high photocatalytic activity, and the degradation percentage of RhB after reaction for 50 min reaches over 90%. The samples of polyhedral microparticles have a relatively low photocatalytic activity, which is possibly due to their large particle size. Hydroxyl (.OH) radical was detected by spectrofluorimetry using terephthalic acid as a .OH scavenger and was not found to be produced over the simulated-sunlight-irradiated Ag3PO4 catalyst. The effect of ethanol, benzoquinone and ammonium oxalate on dye degradation was also investigated. Based on experimental results, the direct oxidation by h+ is suggested to the dominant mechanism toward the dye degradation.

scholarly journals Optimization of medium–low-grade phosphorus rock carbothermal reduction process by response surface methodology

2020 ◽  
Vol 9 (1) ◽  
pp. 349-358
Author(s):  
Biwei Luo ◽  
Pengfei Li ◽  
Yan Li ◽  
Pengpeng He ◽  
Jun Ji ◽  
...  
Keyword(s):  
Particle Size ◽  
Response Surface Methodology ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Carbothermal Reduction ◽  
Reduction Rate ◽  
Molar Ratio ◽  
Temperature Reaction ◽  
Rock Particle ◽  
Phosphorus Reduction

AbstractPhosphorus extraction from phosphorus rock was conducted by carbothermal reduction with silica and coke. The effects of reaction temperature, reaction time, coke excess coefficient, molar ratio of silicon–calcium, and phosphorus rock particle size on the phosphorus reduction rate were investigated by the response surface methodology (RSM). The central composite design (CCD) with five factors and five levels was used to explore the effects of variables’ interactions on the phosphorus reduction rate. The results showed that there are significant interactions between reaction time and temperature; reaction temperature and molar ratio of silicon–calcium; reaction temperature and phosphorus rock particle size; coke excess coefficient and molar ratio of silicon–calcium; and coke excess coefficient and phosphorus rock particle size. The optimum conditions in the experimental range are reaction time 92 min, reaction temperature 1340°C, coke excess coefficient 1.27, molar ratio of silicon–calcium 1.28, and phosphorus rock particle size 75–106 µm, which were derived from the quadratic statistic model. Under these conditions, the phosphorus reduction rate can reach 96.88%, which is close to the model prediction value 99.40%. The optimized carbothermal reduction conditions of phosphorus rock by the RSM are helpful to reduce the energy cost of thermal phosphoric acid process.

scholarly journals Facile Synthesis of Silver Nanoparticles and Preparation of Conductive Ink

Nanomaterials ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 171
Author(s):  
Gui Bing Hong ◽  
Yi Hua Luo ◽  
Kai Jen Chuang ◽  
Hsiu Yueh Cheng ◽  
Kai Chau Chang ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Electrical Resistivity ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Ph Value ◽  
Chemical Reduction ◽  
Flexible Substrate ◽  
Synthesis Method ◽  
Future Research ◽  
Conductive Ink

In the scientific industry, sustainable nanotechnology has attracted great attention and has been successful in facilitating solutions to challenges presented in various fields. For the present work, silver nanoparticles (AgNPs) were prepared using a chemical reduction synthesis method. Then, a low-temperature sintering process was deployed to obtain an Ag-conductive ink preparation which could be applied to a flexible substrate. The size and shape of the AgNPs were characterized by ultraviolet–visible spectrophotometry (UV-Vis) and transmission electron microscopy (TEM). The experiments indicated that the size and agglomeration of the AgNPs could be well controlled by varying the reaction time, reaction temperature, and pH value. The rate of nanoparticle generation was the highest when the reaction temperature was 100 °C within the 40 min reaction time, achieving the most satisfactorily dispersed nanoparticles and nanoballs with an average size of 60.25 nm at a pH value of 8. Moreover, the electrical resistivity of the obtained Ag-conductive ink is controllable, under the optimal sintering temperature and time (85 °C for 5 min), leading to an optimal electrical resistivity of 9.9 × 10−6 Ω cm. The results obtained in this study, considering AgNPs and Ag-conductive ink, may also be extended to other metals in future research.

Partition mechanism of adsorption and the absence of displacement phenomena in the zonal analytical chromatography of proteins on bead 2-hydroxy-3-phenoxypropyl-cellulose

1989 ◽  
Vol 54 (9) ◽  
pp. 2375-2385 ◽  
Author(s):  
Peter Gemeiner ◽  
Eva Hrabárová ◽  
Magdaléna Zacharová ◽  
Albert Breier ◽  
Milan J. Beneš
Keyword(s):  
Reaction Time ◽  
Perchloric Acid ◽  
Adsorption Mechanism ◽  
Spherical Shape ◽  
Molar Ratio ◽  
Temperature Reaction ◽  
Reaction Conditions ◽  
Hydrophobic Region ◽  
Bead Cellulose ◽  
To Come

Hydrophobization of bead cellulose is described, carried out by its alkylation with 1,2-epoxy-3-phenoxypropane under the conditions of acid (perchloric acid, borontrifluoride diethyl etherate) and basic (sodium hydroxide) catalysis. Reaction conditions (temperature, reaction time, molar ratio of reactants) have been determined, allowing the hydrophobization of bead cellulose to be carried out to the largest possible extent while maintaining its spherical shape. The nonstoichiometric mechanism suggested for the adsorption of amphiphilic adsorptives on bead 2-hydroxy-3-phenoxypropyl-cellulose (HPP-C) was checked by means of adsorption of six proteins. It was found that the surface of the hydrophobic segment of the adsorbent must be sufficiently large to be able to come in touch with the hydrophobic region of the protein through its multiple residues. In such cases the partitioning of the protein between the hydrophobic segment present as a liquid-like film and the surrounding solution becomes the predominant step of the adsorption. This adsorption mechanism is also reflected in zonal chromatography on bead HPP-C, as no displacement phenomena could be observed in any of the six proteins used. Retention of these proteins has been affected to a decisive extent by the degree of hydrophobization of HPP-C.

Taguchi Approach and ANOVA in Optimization of the Dissolution of Colemanite in CO2 and SO2- Water Systems

2020 ◽  
Vol 10 (2) ◽  
pp. 88-97
Author(s):  
Zafer Ekinci ◽  
Esref Kurdal ◽  
Meltem Kizilca Coruh
Keyword(s):  
Particle Size ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Gas Flow ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Process Conditions ◽  
Liquid Ratio ◽  
Positive Effects ◽  
Controllable Factors

Background: Turkey is approximately 72% of the world’s boron sources. Colemanite, tincal, ulexite and pandermite are among the most significant in Turkey. Boron compounds and minerals are widely used in many industrial fields. Objective: The main purpose of this study was to investigate the control of impurities in the boric acid production process using colemanite by carrying out the reaction with a mixture of CO2 and SO2 - water, and determining the appropriate process conditions to develop a new process as an alternative to the use of sulfuric acid. Due to worrying environmental problems, intensive studies are being carried out globally to reduce the amount of CO2 and SO2 gases released to the atmosphere. Methods: The Taguchi method is an experimental design method that minimizes the product and process variability by selecting the most appropriate combination of the levels of controllable factors compared to uncontrollable factors. Results: It was evaluated the effects of parameters such as reaction temperature, solid-to liquid ratio, SO2/CO2 gas flow rate, particle size, stirring speed and reaction time. The optimum conditions determined to be reaction temperature of 45°C; a solid–liquid ratio of 0.083 g.mL−1; an SO2/CO2 ratio of 2/2 mL.s−1; a particle size of -0.354+0 .210 mm; a mixing speed of 750 rpm and a reaction time of 20 min. Conclusion: Under optimum operating conditions, 96.8% of colemanite was dissolved. It is thought that the industrial application of this study will have positive effects on the greenhouse effect by contributing to the reduction of CO2 and SO2 emissions that cause global warming.

Study on Synthesis of the High Aspect Ratios Nesquehonite Whiskers

2011 ◽  
Vol 239-242 ◽  
pp. 1118-1122 ◽  
Author(s):  
Ping Ke Yan ◽  
Bin Wang ◽  
Yu Juan Gao
Keyword(s):  
Aqueous Solution ◽  
Reaction Time ◽  
Low Temperature ◽  
Growth Mechanism ◽  
Reaction Temperature ◽  
Solution Method ◽  
Temperature Reaction ◽  
Aspect Ratios ◽  
Whisker Length ◽  
Aqueous Solution Method

In this paper, nesquehonite whiskers were synthesized by low-temperature aqueous solution method, and the impacts of reaction temperature, reaction time and surfactant dosage and other factors on the maximum whisker length and high aspect ratios of nesquehonite whiskers were also investigated. Results showed that under the conditions that the reaction temperature was 40 – 50 °C the reaction time was 50 – 60min and the amount of surfactant dosage was 1% (by mass), high aspect ratios nesquehonite whisker products can be synthesized. On this basis, growth mechanism of the nesquehonite whiskers was discussed.

Preparation and Particle Size Characterization of Cu Nanoparticles Prepared by Anodic Arc Plasma

2010 ◽  
Vol 92 ◽  
pp. 163-169
Author(s):  
Hong Xia Qiao ◽  
Zhi Qiang Wei ◽  
Ming Ru Zhou ◽  
Zhong Mao He
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Specific Surface ◽  
Size Distribution ◽  
Surface Area ◽  
Specific Surface Area ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Average Particle ◽  
Uniform Size

Copper nanoparticles were successfully prepared in large scales by means of anodic arc discharging plasma method in inert atmosphere. The particle size, specific surface area, crystal structure and morphology of the samples were characterized by X-ray diffraction (XRD), BET equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED). The experiment results indicate that the crystal structure of the samples is fcc structure as same as that of the bulk materials. The specific surface area is is 11 m2/g, with the particle size distribution ranging from 30 to 90 nm, the average particle size about 67nm obtained from TEM and confirmed from XRD and BET results. The nanoparticles have uniform size, higher purity, narrow size distribution and spherical shape can be prepared by this convenient and effective method.

Monodispersed Magnetic Fluids: Synthesis and Characterization

2009 ◽  
Vol 155 ◽  
pp. 155-162 ◽  
Author(s):  
Kinnari Parekh ◽  
R.V. Upadhyay ◽  
V.K. Aswal
Keyword(s):  
Particle Size ◽  
Size Distribution ◽  
Single Phase ◽  
Magnetic Measurement ◽  
Spherical Shape ◽  
Uniform Size ◽  
Xrd Pattern ◽  
X Ray ◽  
Monodispersed Particles ◽  
Phase Spinel

Magnetite and Co ferrite particles were synthesized with control of particle size distribution via non-aqueous route. The XRD pattern shows the formation of single phase spinel structure with the particle size of 96 Å and 80 Å respectively for magnetite and cobalt ferrite. TEM image of the same shows the particles are nearly spherical with the size matches with that obtained from X-ray and the size distribution is less than 5%. Magnetic measurement also shows the particles of uniform size with high value of saturation magnetization at room temperature compared to that obtained by other route. SANS study confirms our results of monodispersed particles with spherical shape.

Preparating Arsenic Trioxide with Sulfuric Acid Wet Oxidation

2013 ◽  
Vol 662 ◽  
pp. 437-440
Author(s):  
Lin Zhuan Ma ◽  
Jun Ming Guo ◽  
Qiong Fang Cui ◽  
Man Hong Liu ◽  
Ying Jie Zhang
Keyword(s):  
Particle Size ◽  
Sulfuric Acid ◽  
Reaction Time ◽  
Arsenic Trioxide ◽  
Reaction Temperature ◽  
Extraction Yield ◽  
Wet Oxidation ◽  
Optimal Conditions ◽  
Concentrated Sulfuric Acid

The technology of the acidification is adopted to prepare arsenic trioxide (As2O3). With a concentration of 98% of concentrated sulfuric acid and Orpiment made into a certain ratio of the slurry suspension. Arsenic trioxide’s content is 99.94%, extraction yield can reach to 98.92%. The optimal conditions is reaction temperature at 120°Cand the reaction time in 2.5 h; the slurry ratio is less than 1/6 and particle size is less than 0.080 mm.

Study on the Saccharification Conditions of Fuel Ethanol from Corn Straw

2014 ◽  
Vol 672-674 ◽  
pp. 172-176
Author(s):  
Min Zhang ◽  
Jin Yang Li ◽  
Hai Bin Fu
Keyword(s):  
Reaction Time ◽  
Ethanol Production ◽  
Reaction Temperature ◽  
Fuel Ethanol ◽  
Orthogonal Test ◽  
Optimal Combination ◽  
Hydrolysis Rate ◽  
Temperature Reaction ◽  
Corn Straw ◽  
Main Factors

To study the saccharification conditions of cellulase on lignocellulose material, this paper used corn straw as the material to do research on the effect of cellulase. The hydrolysis factors, including reaction temperature, reaction time and cellulase concentration, were measured in order to determine the optimal saccharification conditions for fuel ethanol production. The results showed that, when the reaction temperature was 45°C, reaction time was 72 h and cellulase concentration was 60 IU/g, the hydrolysis rate can respectively reach 6.25 %, 14.7 % and 14.4 %. By the analysis of orthogonal test, the main factors effects the saccharification was reaction time. And the optimal combination of saccharification conditions was the reaction time of 54 h, the reaction temperature of 45 °C, and the cellulase concentration of 55 IU/g.

Sign in / Sign up

Export Citation Format

Share Document