Study on Gas Turbine-Based CCHP System with Multi-Objective Evaluation Index

2013 ◽  
Vol 860-863 ◽  
pp. 1366-1369 ◽  
Author(s):  
Dan Dan Sun ◽  
Cheng Yang ◽  
Fei Zeng
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Objective Evaluation ◽  
Evaluation Index ◽  
Heat Recovery Steam Generator ◽  
Evaluation Indexes ◽  
Multi Objective ◽  
Combined Cooling ◽  
Weight Coefficients

Currently, there are many evaluation indexes for gas turbine-based combined cooling, heating and power （CCHP）. In this paper, a multi-objective evaluation index (MEI) model was suggested and weight coefficients were considered in the model. The CCHP system evaluated in this study was composed of gas turbine + heat recovery steam generator (HRSG ) + LiBr absorption chiller. The gas turbine-based CCHP system was evaluated and the component capacity was optimized with the proposed MEI. The study provides a reference for the allocation and operation of gas turbine-based CCHP.

scholarly journals Gas Turbine Heat Recovery Steam Generators for Combined Cycles Natural or Forced Circulation Considerations

1988 ◽  
Author(s):  
Akber Pasha
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Power Plants ◽  
Natural Circulation ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator ◽  
Steam Generators ◽  
Forced Circulation ◽  
Gas Turbine Exhaust

In recent years the combined cycle has become a very attractive power plant arrangement because of its high cycle efficiency, short order-to-on-line time and flexibility in the sizing when compared to conventional steam power plants. However, optimization of the cycle and selection of combined cycle equipment has become more complex because the three major components, Gas Turbine, Heat Recovery Steam Generator and Steam Turbine, are often designed and built by different manufacturers. Heat Recovery Steam Generators are classified into two major categories — 1) Natural Circulation and 2) Forced Circulation. Both circulation designs have certain advantages, disadvantages and limitations. This paper analyzes various factors including; availability, start-up, gas turbine exhaust conditions, reliability, space requirements, etc., which are affected by the type of circulation and which in turn affect the design, price and performance of the Heat Recovery Steam Generator. Modern trends around the world are discussed and conclusions are drawn as to the best type of circulation for a Heat Recovery Steam Generator for combined cycle application.

New Concept of a Micro Gas Turbine Based Co-Generation Package for Performance Improvement in Practical Use

2005 ◽  
Author(s):  
Kenichiro Mochizuki ◽  
Satoshi Shibata ◽  
Umeo Inoue ◽  
Toshiaki Tsuchiya ◽  
Hiroko Sotouchi ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Thermal Efficiency ◽  
Heat Recovery ◽  
Steam Injection ◽  
Operating Conditions ◽  
Market Potential ◽  
Injection System ◽  
Heat Recovery Steam Generator ◽  
Micro Gas Turbine

As the energy consumption has been increasing rapidly in the commercial sector in Japan, the market potential for the micro gas turbine is significant and it will be realized substantially if the thermal efficiency is improved. One of measures is to introduce the steam injection system using the steam generated by the heat recovery steam generator. Steam injection tests have been carried out using a micro gas turbine (Capstone C60). Test results showed that key performance parameters such as power output, thermal efficiency and emissions were improved by the steam injection. The stable operation of micro gas turbine with steam injection was confirmed under various operating conditions. Consequently, a micro gas turbine based co-generation package with steam injection driven by a heat recovery steam generator (HRSG) with supplementary firing is proposed.

scholarly journals Performance Analysis of Combined Cycle with Air Breathing Derivative Gas Turbine, Heat Recovery Steam Generator, and Steam Turbine as LNG Tanker Main Engine Propulsion System

2020 ◽  
Vol 8 (9) ◽  
pp. 726
Author(s):  
Wahyu Nirbito ◽  
Muhammad Arif Budiyanto ◽  
Robby Muliadi
Keyword(s):  
Performance Analysis ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Combined Cycle ◽  
Propulsion System ◽  
Heat Recovery Steam Generator ◽  
Main Engine ◽  
Ship Speed

This study explains the performance analysis of a propulsion system engine of an LNG tanker using a combined cycle whose components are gas turbine, steam turbine, and heat recovery steam generator. The researches are to determine the total resistance of an LNG tanker with a capacity of 125,000 m3 by using the Maxsurf Resistance 20 software, as well as to design the propulsion system to meet the required power from the resistance by using the Cycle-Tempo 5.0 software. The simulation results indicate a maximum power of the system of about 28,122.23 kW with a fuel consumption of about 1.173 kg/s and a system efficiency of about 48.49% in fully loaded conditions. The ship speed can reach up to 20.67 knots.

On the Effect of Swirl Flow of Gas Turbine Exhaust Gas in an Inlet Duct of Heat Recovery Steam Generator

2002 ◽  
Vol 124 (3) ◽  
pp. 496-502 ◽  
Author(s):  
B. E. Lee ◽  
S. B. Kwon ◽  
C. S. Lee
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Swirl Flow ◽  
Exhaust Gas ◽  
Heat Recovery Steam Generator ◽  
Gas Turbine Exhaust ◽  
Duct Burner ◽  
Turbine Exhaust ◽  
Inlet Duct

Computational and experimental studies are performed to investigate the effect of swirl flow of gas turbine exhaust gas (GTEG) in an inlet duct of a heat recovery steam generator (HRSG). A supplemental-fired HRSG is chosen as the model studied because the uniformity of the GTEG at the inlet plane of the duct burner is essential in such applications. Both velocity and oxygen distributions are investigated at the inlet plane of the duct burner installed in the middle of the HRSG transition duct. Two important parameters, the swirl angle of GTEG and the momentum ratio of additional air to GTEG, are chosen for the investigation of mixing between the two streams. It has been found that a flow correction device (FCD) is essential to provide a uniform gas flow distribution at the inlet plane of the duct burner.

scholarly journals Optimization of Gas Turbine HRSG Cycles Some Concepts

1991 ◽  
Author(s):  
Akber Pasha
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Combined Cycle ◽  
Heat Recovery Steam Generator ◽  
Recent Developments ◽  
Overall Efficiency ◽  
Total Performance

Today the Heat Recovery Steam Generator (HRSG) has become an integral part of the combined cycle or Cogen plant because of its influence on other equipment. Therefore, the optimization of the HRSG has become one of the prime targets to improve the overall efficiency. The paper presents recent developments and concepts used in HRSG design which improve either the efficiency or the range of performance or both. The paper discusses three major areas of a HRSG - Superheater/Reheater, Economizer, and LP Evaporator/Feedwater Preheater. Depending upon the requirement, the user can implement one or more of the concepts to improve the total performance and/or the reliability.

scholarly journals Repowering of a Small Utility: A Unique Solution to a Unique Problem

1979 ◽  
Author(s):  
L. F. Fougere ◽  
H. G. Stewart ◽  
J. Bell
Keyword(s):  
Steam Turbine ◽  
Gas Turbine ◽  
Steam Generator ◽  
Gas Turbines ◽  
Heat Recovery ◽  
Electric Utility ◽  
Combined Cycle ◽  
Steam Boiler ◽  
Heat Recovery Steam Generator ◽  
Turbine Generator

Citizens Utilities Company’s Kauai Electric Division is the electric utility on the Island of Kauai, fourth largest and westernmost as well as northernmost of the Hawaiian Islands. As a result of growing load requirements, additional generating capacity was required that would afford a high level of reliability and operating flexibility and good fuel economy at reasonable capital investment. To meet these requirements, a combined cycle arrangement was completed in 1978 utilizing one existing gas turbine-generator and one new gas turbine-generator, both exhausting to a new heat recovery steam generator which supplies steam to an existing steam turbine-generator. Damper controlled ducting directs exhaust gas from either gas turbine, one at a time, through the heat recovery steam generator. The existing oil-fired steam boiler remains available to power the steam turbine-generator independently or in parallel with the heat recovery steam generator. The gas turbines can operate either in simple cycle as peaking units or in combined cycle, one at a time, as base load units. This arrangement provides excellent operating reliability and flexibility, and the most favorable economics of all generating arrangements for the service required.

Selective Catalytic Reduction Impact on Heat Recovery Steam Generator Design and Operation

1986 ◽  
Author(s):  
James S. Davis ◽  
G. C. Duponteil
Keyword(s):  
Selective Catalytic Reduction ◽  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Gas Flow ◽  
High Efficiency ◽  
Catalytic Reduction ◽  
Nox Reduction ◽  
Heat Recovery Steam Generator ◽  
The Impact

Selective Catalytic Reduction (SCR) is a post-combustion method to reduce the oxides of nitrogen (NOx), present in flue gases such as gas turbine exhaust streams, to N2 and water. It involves the injection of ammonia and the use of a catalyst module to promote the reaction to obtain high efficiency (60–86+%) NOx reduction. Several operating parameters can influence catalyst performance to include temperature, gas flow distribution, presence of sulfur compounds and catalyst age. This paper examines the impact of a SCR integration in a gas turbine heat recovery steam generator (HRSG) design/operation. Limitations on HRSG load and following capabilities, effect on capital cost and overall performance and current SCR system experience represent a number of areas that are examined.

Performance Enhancement of Advanced Combined Cycles

2003 ◽  
Author(s):  
Sanjay ◽  
Onkar Singh ◽  
B. N. Prasad
Keyword(s):  
Gas Turbine ◽  
Steam Generator ◽  
Heat Recovery ◽  
Performance Enhancement ◽  
Pressure Ratio ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Heat Recovery Steam Generator ◽  
Component Efficiency ◽  
Plant Efficiency

This paper reports on the development requirements of gas/steam combined cycle with an aim to achieve plant efficiency greater than 62% through various development possibilities in gas turbine and steam turbine cycle by taking a reference combined cycle configuration (MS9001H gas turbine and three pressure heat recovery steam generator with reheat). The innovative development possibilities include the advanced inlet design to reduce pressure loss, the increase in turbine inlet temperature, use of advanced turbine blade material, increased component efficiency, improved turbine cooling technologies along with better cooling medium, incorporating intercooling, reheat and regeneration either separately or in combination with simple gas turbine cycle using higher compressor pressure ratio, better utilization of heat recovery steam generator, minimum stack temperature, single shaft system configuration, etc. Based on the quantification of each development item, if incorporated in reference cycle, it has been estimated that the combined cycle as the potential to achieve the plant efficiency in excess of 63%.

Sign in / Sign up

Export Citation Format

Share Document