A Method of Improving Accuracy of Lapping Main Cylinder of Brake-Pump

2014 ◽  
Vol 875-877 ◽  
pp. 1377-1381
Author(s):  
Jian Dong Yang ◽  
Feng Xiang Li ◽  
Hui Yan
Keyword(s):  
Pressure Distribution ◽  
Machining Process ◽  
New Method ◽  
Existing Problems ◽  
Pressure Method ◽  
New Type ◽  
Improving Accuracy

This paper analyzes the existing problems of acting lapping pressure in lapping internal holes of main cylinder of brake-pump with solid abrasives, proposes a new type of solid abrasives supporting method, namely, three supportting points acting lapping pressure method. The method improves pressure distribution between solid abrasives and the surface of the machined workpiece,which is favorable to increase cylindricity of machined hole.Through actual machining process, new method is demonstrated increasing cylindricity accuracy of machined holes of main cylinder significantly.

Analysis for Force in a New Method of Lapping Brake Pump Master Cylinder

2013 ◽  
Vol 275-277 ◽  
pp. 2280-2283
Author(s):  
Jian Dong Yang ◽  
Yi Quan Li ◽  
Duo Long
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Pressure Distribution ◽  
Machining Process ◽  
New Method ◽  
Master Cylinder ◽  
Element Method

By means of finite element method this paper analyzes a new support method used in lapping with solid abrasive and reearches lapping pressure distribution between workpiece machining surface and solid abrasive in lapping process with lapping tool pressed by three support points.From results we can find that by means of the new method the lapping pressure distribution between workpiece machining surface and solid abrasive is improved obviously in lapping process,which is favorable to increase cylindricity of machined hole.Through actual machining process, new method is demonstrated increasing cylindricity accuracy of machined holes of main cylinder significantly.

scholarly journals Pandemic and Social Work: Exploring Finnish Social Workers’ Experiences through a SWOT Analysis

2021 ◽  
Author(s):  
Timo Harrikari ◽  
Marjo Romakkaniemi ◽  
Laura Tiitinen ◽  
Sanna Ovaskainen
Keyword(s):  
Content Analysis ◽  
Social Work ◽  
Social Workers ◽  
Swot Analysis ◽  
Adaptive Governance ◽  
Thematic Content Analysis ◽  
Face To Face ◽  
Existing Problems ◽  
Welfare Institutions ◽  
New Type

Abstract This article addresses the experiences of Finnish frontline social workers during the first wave of the COVID-19 pandemic in the spring of 2020. Two questions are addressed. First, ‘what types of challenges social work professionals faced’ in their everyday, ‘glocal’ pandemic setting and, second, what types of solutions they developed to meet these challenges. The data consist of 33 personal diaries that social work professionals created from mid-March to the end of May 2020. The diaries are analysed by a thematic content analysis and placed within the framework of a strengths, weaknesses, opportunities and threats analysis. The results suggest that the pandemic challenged social work at all levels, from face-to-face interactions to its global relations. The pandemic revealed not only the number of existing problems of social work, but also created new types of challenges. It demanded ultimate resilience from social workers and a new type of adaptive governance from social welfare institutions.

Dynamic Characteristic Analysis of New Pneumatic Bending Joint

2012 ◽  
Vol 271-272 ◽  
pp. 1742-1749
Author(s):  
Peng Cheng Huang ◽  
Qing Hua Yang ◽  
Guan Jun Bao ◽  
Li Bin Zhang
Keyword(s):  
Response Time ◽  
Dynamic Characteristic ◽  
Simulation Analysis ◽  
Characteristic Analysis ◽  
Pneumatic Actuators ◽  
Bending Performance ◽  
First Law Of Thermodynamics ◽  
Existing Problems ◽  
Joint Damping ◽  
New Type

Aimed at existing problems on the bending performance of pneumatic bending joint, a new type of pneumatic bending joint is proposed in this paper. Double flexible pneumatic actuators are used as actuating drivers. Based on the first law of thermodynamics and the joint dynamic equation, the angle dynamic model is established and analyzed. Moreover simplified model is proposed. Meanwhile, its dynamic characteristic is analyzed through simulation analysis. The simulation suggests the following results: in the gas-filled phase, the joint’s pressure response time is about 10ms; while it is about 60ms in the gas-escape phase; and the angle response time of joint is 10 to 20ms. When the joint damping coefficient is increasing, this value will also increase.

Design for New Type Tobacco Sewing Machine Head

2014 ◽  
Vol 687-691 ◽  
pp. 300-303
Author(s):  
Li Zhang ◽  
Ting You Wang ◽  
Hong Bin Liu
Keyword(s):  
Simple Structure ◽  
Leaf Damage ◽  
Analytic Method ◽  
Sewing Machine ◽  
Tobacco Leaf ◽  
Existing Problems ◽  
Damage Rate ◽  
New Type ◽  
Drawing Method ◽  
New Machine

In order to reducing the worker's labor intensity in tobacco sewing, a new machine adoption with single thread sewing technology was developed. Through analyzing the existing problems in sewing machine and the tobacco damage situation, using drawing method, analytic method and other methods, the shape of the sewing component, hook line components and other mating parts were designed. The results show that the machine has the advantages of simple structure, controllable sewing speed, adjustable leaf thickness and quantity. And the tobacco leaf damage rate is low. The comprehensive efficiency in tobacco leaf knitting with this machine is four times higher than that with hand knitting. Its application prospect is considerable.

Study on Improving Accuracy in Robotic Milling of Aluminum Alloy

2018 ◽  
Author(s):  
Shaochun Sui ◽  
Kai Guo ◽  
Jie Sun ◽  
Yiran Zang
Keyword(s):  
Aluminum Alloy ◽  
Industrial Robot ◽  
Vibration Signal ◽  
Industrial Robots ◽  
Machining Process ◽  
Cnc Machine ◽  
Machined Surface ◽  
Improving Accuracy ◽  
High Level ◽  
Monolithic Components

Nowadays, the application of using industrial robots in manufacture is a diminutive due to its own low rigidity and low stiffness. This leads to high level of vibrations that limits the quality and the precision of the workpiece. So they are usually used for welding, grinding and paint shop. However, the potential of industrial robot applications in machining has be realized. The volume of monolithic components is large and there are many issues in machining process such as geometric tolerance and quality of machined surface. In such cases the traditional CNC machine is replaced by industrial robots, which will reduce the production cost, reduce labor and increase the efficiency. In this paper, the milling experiment of 7050-T7451 aeronautical aluminum alloy was carried out by using industrial robot KR210 R2700. In addition, the experiment was employed to study the influence of milling speed, feed-rate, cutting depth and cutting width on vibrations, surface roughness was also measured to evaluate the machining quality. Besides, the axis of angle was changed which led to the different industrial robot’s postures. The vibration signal of different postures was acquired, which was used to analysis the optimal workspace of industrial robot. The best process parameters were obtained, which will play a guiding significance on the actual production.

scholarly journals Research on High-strength Flexible Insulation Rod of Ultra High Voltage Live Working

2021 ◽  
Vol 248 ◽  
pp. 01054
Author(s):  
Zhigang Wang ◽  
Yun Xiang ◽  
Ziqi Yi ◽  
Longfei He ◽  
Mingjie Chen ◽  
...  
Keyword(s):  
High Voltage ◽  
Transmission Lines ◽  
Large Deflection ◽  
High Strength ◽  
Heavy Weight ◽  
Existing Problems ◽  
The Core ◽  
New Type ◽  
Protective Cover ◽  
Core Rod

Insulation pull rods are commonly used tools and instruments in the replacement of insulators for live work. Traditional hard insulated pull rods are difficult to transport and assemble due to their large deflection, especially due to the long and heavy weight of insulated pull rods used in UHV live operations, the difficulties in the above links are more obvious. In view of the existing problems in the use of the existing insulated pull rods, by studying the overall processing type, the soft pull rod weaving process, the technology of tightly combining the core rod and the protective cover, the technology of connecting the core rod and the metal, etc., a new type suitable for live transmission lines has been developed. Large-tonnage soft insulated pull rod for operation. Effectively solve a series of problems caused by the large deflection of the hard insulated pull rod.

scholarly journals Research Status and Development Trend of Magnetic Fluid Acceleration Sensors

2021 ◽  
pp. 10-15
Author(s):  
Mu Xueyu ◽  
Yang Shaojie ◽  
Kong Xiangdong
Keyword(s):  
General Structure ◽  
Inertial Mass ◽  
Development Trend ◽  
Research Progress ◽  
Acceleration Sensor ◽  
Magnetic Liquid ◽  
Existing Problems ◽  
Acceleration Sensors ◽  
New Type ◽  
The Difference

As a new type of accelerometer, in recent years, the magnetic liquid acceleration sensor has attracted widespread attention worldwide, and related research results have also continued to emerge. This article mainly introduces the theoretical basis and general structure of the magnetic liquid acceleration sensor, and according to the difference of inertial mass, briefly describes the research progress of the magnetic liquid acceleration sensor by national and foreign scholars in recent years and some in existing problems. Finally, suggestions and prospects for the future development trend of the magnetic liquid acceleration sensor are given.

scholarly journals Research on New Relation between the Chinese Government and Trade Associations

2017 ◽  
Vol 12 (5) ◽  
pp. 153
Author(s):  
Xue Ao
Keyword(s):  
Trade Association ◽  
Chinese Government ◽  
Trade Associations ◽  
Important Indicator ◽  
Literature Research ◽  
Existing Problems ◽  
Development Level ◽  
Exploratory Stage ◽  
New Type ◽  
The Government

The development level of trade associations is the important indicator which is used to judge the maturity of development in a country’s or region’s market economy. China now is in the exploratory stage of “disconnect” between the government and trade associations, and the relation between them shall be reconstructed. This paper used the methods of literature research, norms and empirical analysis, etc. to analyze the evolution and existing problems of the relation between the government and trade associations, exploring the new type of relation after trade association disconnect from the government, in order to promote the formation of the modern trade association chamber of commerce system.

Sign in / Sign up

Export Citation Format

Share Document