scholarly journals The Photodegradation of Organic Compounds by ZnO Nanopowder

2014 ◽  
Vol 895 ◽  
pp. 547-557 ◽  
Author(s):  
T.K. Tan ◽  
P.S. Khiew ◽  
W.S. Chiu ◽  
S. Radiman ◽  
R. Abd-Shukor ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Organic Compounds ◽  
Zno Nanoparticles ◽  
Uv Light ◽  
Aqueous Suspension ◽  
Phenol Red ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Zno Nanopowder

The commercialized ZnO nanopowder has been employed in this study to investigate the photocatalytic degradation of two organic compounds, Methylene Blue (MB) and Phenol Red (PR) in an aqueous suspension of ZnO nanoparticles under UV light irradiation. This study has considered ZnO as the photocatalyst because it has been reported as a suitable substitute for TiO2 in certain application. For the characterization of the ZnO photocatalyst, X-ray diffraction (XRD), transmission electron microscopy (TEM), specific surface area analysis (BET), and UV-visible spectroscopy were exploited. X-ray diffractometry result for the ZnO nanoparticles exhibit normal crystalline phase features. All observed peaks can be indexed to the pure hexagonal wurtzite crystal structures, with the space group of P63mc. From the XRD pattern, no diffraction peaks from other impurities have been observed. In addition, TEM measurement shows that most of the nanoparticles are spherical and rod-like in shape and fairly monodispersed. A significant degradation of the organic compounds were observed in the presence of the catalyst without the irradiation of the UV light and the degradation increases significantly when irradiated with the UV light for a certain period of time. Besides, for the same period of irradiation, the photodegradation of the organic compounds was increased as the photocatalyst loading increases. The BET measurement for ZnO was 11.9 m2/g. The effect of some parameters such as initial concentration of organic compounds and photocatalyst loading were also determined. Keywords: Nanostructures; Methylene blue; Phenol red; Zinc oxide; Heterogeneous photocatalyst

Synthesis and characterization of novel poly(HAzPMA-co-SA)/RDX/CdS nanocomposite as a polymer bonded explosive

2020 ◽  
Vol 98 (12) ◽  
pp. 755-763
Author(s):  
Hamid Reza Ghayeni ◽  
Reza Razeghi ◽  
Abolfazl Olyaei
Keyword(s):  
Uv Light ◽  
Light Exposure ◽  
Sodium Acrylate ◽  
Spectroscopic Techniques ◽  
Effective Parameters ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cds Nanorods ◽  
Transmission Electron

Cadmium sulfide nanorods with a length of 69 nm have been prepared by using Cd(OAc)2.2H2O and S8 at 125 °C in the presence of triethylenetetramine as the template agent and coordination agent and characterized by using X-ray diffraction, transmission electron microscopy, FTIR, photoluminescence, and UV–vis absorption spectroscopic techniques. Photocopolymerization of glycidyl methacrylate (GMA) and sodium acrylate (SA) was carried out using CdS nanorods as a photocatalyst under UV light exposure at 400 nm in the presence of β-cyclodextrin (β-CD). To optimization of the effective parameters on the synthesis of copolymer nanocomposite, the amounts of initiator, monomers, and β-CD, duration of pre-deoxygenation, and light wavelength were evaluated. Ring opening of poly(GMA-co-SA)/CdS nanocomposite with NaN3 afforded poly(HAzPMA-co-SA)/CdS nanocomposite and subsequent mixing with RDX in DMF led to the formation of poly(HAzPMA-co-SA)/RDX/CdS nanocomposite as a polymer bonded explosive. All of the copolymer nanocomposites were characterized using various tools of instrumental analysis.

scholarly journals Hydrothermal synthesis of ZnO quantum dot/KNb3O8 nanosheet photocatalysts for reducing carbon dioxide to methanol

2017 ◽  
Vol 8 ◽  
pp. 2264-2270 ◽  
Author(s):  
Xiao Shao ◽  
Weiyue Xin ◽  
Xiaohong Yin
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Uv Light ◽  
Formation Rate ◽  
X Ray Diffraction ◽  
Methanol Production ◽  
X Ray ◽  
Transmission Electron ◽  
Methanol Formation ◽  
Zno Quantum Dots

ZnO quantum dots and KNb3O8 nanosheets were synthesized by a two-step hydrothermal method for the photocatalytic reduction of CO2 to methanol where isopropanol is simultaneously oxidized to acetone . The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis absorption spectroscopy (UV–vis). The photocatalytic activity of the materials was evaluated by formation rate of methanol under UV light irradiation at ambient temperature and pressure. The methanol formation rate of pure KNb3O8 nanosheets was found to be 1257.21 μmol/g/h, and after deposition of 2 wt % ZnO quantum dots on the surface of KNb3O8 nanosheets, the methanol production rate was found to increase to 1539.77 μmol/g/h. Thus, the ZnO quantum dots obviously prompted separation of charge carriers, which was explained by a proposed mechanism for this photocatalytic reaction.

Photocatalytic Activity of Zeolite Supported Transition Metal-(Co2+ and Cr2+) Doped ZnO: Comparative Study

2015 ◽  
Vol 827 ◽  
pp. 43-48
Author(s):  
Annisa Noorhidayati ◽  
Mia Putri Rahmawati ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh
Keyword(s):  
Transition Metal ◽  
Zno Nanoparticles ◽  
Diffuse Reflectance Spectroscopy ◽  
Uv Light ◽  
Transition Metal Ions ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Doped Zno ◽  
Co Precipitation

Transition metal ions (Co and Cr) doped ZnO nanoparticles supported on natural zeolite were synthesized using co-precipitation method. The synthesized samples were characterized by means of X-ray diffraction, energy dispersive X-ray, Fourier-transform infrared absorption, and UV-visible diffuse reflectance spectroscopy. The samples were further used as photocatalyst for degradation of methyl orange and methylene blue in aqueous solutions under UV light irradiation. The results showed that zeolite supported Cr-doped ZnO nanoparticles is more efficient compared with zeolite supported Co-doped ZnO nanoparticles. It is also revealed that zeolite supported samples possessed higher photocatalytic efficiency compared to bare samples.

Synthesis and Characterization of Rare Earth (Tb3+ and Yb3+) Doped CdS/ZnS Core/Shell Nanocrystals for Enhanced Photovoltaic Efficiency

2011 ◽  
Vol 1322 ◽  
Author(s):  
Sandip Das ◽  
Krishna C. Mandal
Keyword(s):  
Rare Earth ◽  
Uv Light ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
Broadband Absorption ◽  
Photovoltaic Efficiency ◽  
Transmission Electron

ABSTRACTCdS host nanocrystals with 4.2-5.5 nm in diameter have been synthesized from air stable precursors via a synthetic chemical route and doped with rare earth (RE) terbium (Tb3+) and ytterbium (Yb3+) ions. RE3+-doped CdS cores were shelled by ZnS layers of different thicknesses. The resulting core/shell nanocrystals show a complete broadband absorption below 400-460 nm to the deep UV region depending on the size of the cores. RE3+-doped CdS nanocrystals showed a red shift in the emission as observed under irradiation of 302 nm UV light and was confirmed by room temperature photoluminescence (PL) measurements. The nanocrystals were further characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), and energy dispersive x-ray (EDX) analysis. The results show that these RE3+-doped nanocrystals can be used as solar spectral matching downconversion material to enhance photovoltaic efficiency of existing solar cells.

Solvothermal Synthesis of Novel 3D Peony-Like TiO2 Microstructures and its Enhanced Photocatalytic Activity

NANO ◽  
2018 ◽  
Vol 13 (05) ◽  
pp. 1850056 ◽  
Author(s):  
Yugan He ◽  
Qi Yan ◽  
Xiaoyu Chang ◽  
Meiying Zhu ◽  
Weiwei Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Reaction Time ◽  
Uv Light ◽  
X Ray Diffraction ◽  
Reaction Parameters ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Transmission Electron ◽  
Irradiation Power ◽  
Degussa P25

A TiO2 photocatalyst with peony-like microstructures and a large percentage of exposed {001} facets was synthesized using a facile solvethermal method. The peony-like TiO2 was obtained using HF as a capping agent, TiCl4 as the precursor and ethanol as the solvothermal agent. The parameters which influence the mophology and formation mechanism of the products including the HF concentration, the reaction time and temperature and the solvothermal solvent, were investigated. The samples were characterized using field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption analysis. As the reaction time or reaction temperature increased, the morphology TiO2 changed from hexagonally assembled microspheres to peony-like microflowers which were composed of stacks of ultrathin nanosheets. The other reaction parameters also play a crucial role in the formation of the TiO2 microstuctures. Photocatalytic experiments showed that the synthesized TiO2 outperformed Degussa P25 in the photodegradation of methelene blue under a very weak UV light irradiation (power: 8[Formula: see text]W, light intensity: 0.4[Formula: see text]mW[Formula: see text]cm[Formula: see text]).

scholarly journals Synthesis, Characterization, and Photocatalytic Performance of Mesoporous α-Mn2O3 Microspheres Prepared via a Precipitation Route

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Manoj Pudukudy ◽  
Zahira Yaakob
Keyword(s):  
Electron Microscopy ◽  
Uv Light ◽  
Thermal Transformation ◽  
Xrd Analysis ◽  
Structural Deformation ◽  
Blue Dye ◽  
X Ray Diffraction ◽  
Electron Microscopic ◽  
X Ray ◽  
Transmission Electron

α-Mn2O3 microspheres with high phase purity, crystallinity, and surface area were synthesized by the thermal decomposition of precipitated MnCO3 microspheres without the use of any structure directing agents and tedious reaction conditions. The prepared Mn2O3 microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) and photoluminescence (PL) studies. The complete thermal transformation of MnCO3 to Mn2O3 was clearly shown by the FTIR and XRD analysis. The electron microscopic images clearly confirmed the microsphere-like morphology of the products with some structural deformation for the calcined Mn2O3 sample. The mesoporous texture generated from the interaggregation of subnanoparticles in the microstructures is visibly evident from the TEM and BET studies. Moreover, the Mn2O3 microstructures showed a moderate photocatalytic activity for the degradation of methylene blue dye pollutant under UV light irradiation, using air as the potential oxidizing agent.

Hydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS Nanostructures

2011 ◽  
Vol 335-336 ◽  
pp. 460-463 ◽  
Author(s):  
Hong Mei Wang ◽  
Da Peng Zhou ◽  
Yuan Lian ◽  
Ming Pang ◽  
Dan Liu
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Sulfur Source ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures

Hexagonal flower-like CdS nanostructures were successfully synthesized through a facile hydrothermal method with thiourea as sulfur source. By combining the results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), the structural and morphological characterizations of the products were performed. The photocatalytic activity of CdS nanostructures had been tested by degradation of Rhodamine B (RB) under UV light compared to commercial CdS powders, which indicated that the as-syntherized CdS nanostructures exhibited enhanced photocatalytic activity for degradation of RB. The possible growth mechanism of CdS nanostructures was proposed in the end.

scholarly journals The Improved Photocatalytic Properties of Methylene Blue for V2O3/CNT/TiO2Composite under Visible Light

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Ming-Liang Chen ◽  
Won-Chun Oh
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Photocatalytic Degradation ◽  
Area Measurement ◽  
Bet Surface Area ◽  
Multiwall Carbon Nanotube ◽  
X Ray Diffraction ◽  
Vanadyl Acetylacetonate ◽  
X Ray ◽  
Transmission Electron

Multiwall carbon nanotube (MWCNT), vanadyl acetylacetonate (V(acac)3), and titaniumn-butoxide (TNB) were used as carbon, vanadium oxide, and titanium oxide precursor to prepare V2O3/CNT/TiO2composite. The obtained composite was characterized by BET surface area measurement, X-ray diffraction, transmission electron microscopy, and energy dispersive X-ray analysis. In addition, we used methylene blue (MB) solution under condition of visible light irradiation to determine their photocatalytic degradation efficiency. In conclusion, the V2O3/CNT/TiO2composite had excellent photocatalytic degradation for MB solution under visible light.

Aqueous Ferrofluid of Citric Acid Coated Magnetite Particles

2003 ◽  
Vol 789 ◽  
Author(s):  
A. Goodarzi ◽  
Y. Sahoo ◽  
M. T. Swihart ◽  
P. N. Prasad
Keyword(s):  
Citric Acid ◽  
Photoelectron Spectroscopy ◽  
Quantum Interference ◽  
Fluorescent Dyes ◽  
Aqueous Suspension ◽  
Medical Diagnostics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Magnetite Particles

ABSTRACTMagnetic nanoparticles have found application in medical diagnostics such as magnetic resonance imaging and therapies such as cancer treatment. In these applications, it is imperative to have a biocompatible solvent such as water at optimum pH for possible bio-ingestion. In the present work, a synthetic methodology has been developed to get a well-dispersed and homogeneous aqueous suspension of Fe3O4 nanoparticles in the size range of 8–10 nm. The surface functionalization of the particles is provided by citric acid. The particles have been characterized using transmission electron microscopy, magnetization measurements with a superconducting quantum interference device, FTIR spectroscopy (for surfactant binding sites), thermogravimetric studies (for strength of surfactant binding), and x-ray photoelectron spectroscopy and x-ray diffraction (for composition and phase information). The carboxylate functionality on the surface provides an avenue for further surface modification with fluorescent dyes, hormone linkers etc for possible cell-binding, bioimaging, tracking, and targeting.

scholarly journals Photodecolorization of methylene blue over EGZrO2/EGZnO/EGFe2O3/HY photocatalyst: Effect of radical scavenger

2014 ◽  
Vol 9 (2) ◽  
Author(s):  
Aishah Abdul Jalil ◽  
N. Sapawe ◽  
Sugeng Triwahyono
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Radical Scavenging ◽  
Radical Scavenger ◽  
Optimum Conditions ◽  
X Ray Diffraction ◽  
Hy Zeolite ◽  
X Ray ◽  
Simple Preparation ◽  
Transmission Electron

The photocatalytic activity of methylene blue (MB) was investigated in aqueous solutions under solar radiation using electrogenerated metals supported on HY zeolite (EGZrO2/EGZnO/EGFe2O3/HY) catalyst. The prepared catalysts were examined using X-ray diffraction (XRD), transmission electron microscopy (TEM), and Brunnauer-Emmett-Teller surface area analysis (BET). An amount of 0.375 g L−1 EGZrO2/EGZnO/EGFe2O3/HY was found to be the optimum dosage for 10 mg L−1 MB, which gave almost complete photodecolorization of MB (99.5%) after 1 h of contact time at pH 9. Next, the effect of inorganic salts such as NaCl, Na2CO3, Na2SO4, and KI was also studied. It was found that the presence of the Cl− and CO3−2 ions obstructed the photodecolorization, but the presence of SO42− accelerated the reaction. The presence of I− ions did not affect much on the decolorization rate. Furthermore, the addition of H2O2 significantly enhanced the photodecolorization for the 50 mg L−1 of MB solution under similar optimum conditions. It was also found that the radical scavenging agents such as dimethyl sulfoxide (DMSO) and methanol (MeOH) suppressed the decolorization, with DMSO being the most effective. The simple preparation of the photocatalyst and low amount of metal loading required exhibits the great potential of the system that could be applied in textile or other industries wastewater treatment.

Sign in / Sign up

Export Citation Format

Share Document