Rapid Preparation of Solid Alcohol

2013 ◽  
Vol 781-784 ◽  
pp. 131-134
Author(s):  
Hai Yan Du ◽  
Jing Fan ◽  
Wei Ming Wu
Keyword(s):  
Stearic Acid ◽  
Raw Materials ◽  
Orthogonal Experiment ◽  
Nitrate Solution ◽  
Influence Factors ◽  
Copper Nitrate ◽  
Rapid Preparation ◽  
Preparation Conditions ◽  
Materials Used ◽  
Main Influence

This paper investigated several influencing factors for the preparation of solid alcohol, including the amount of raw materials used such as stearic acid and copper nitrate and so on, and the temperature, etc. Through single factor experiments, the main influence factors of preparing solid alcohol were determined. And, on this basis, in view of three remarkable influence factors: the stearic acid amount used, the copper nitrate amount used and the temperature, the orthogonal experiment was carried out. Finally, the optimal preparation conditions were determined as follows: 25ml industrial alcohol, 1.3g stearic acid, 1.2ml 10% copper nitrate solution, at 75°C, pH 8, the cooling way is gradual cooling with no refluxing.

Analysis and Study on the Components of Starch and Wood Fiber Biodegradable Foam

2011 ◽  
Vol 219-220 ◽  
pp. 1436-1439
Author(s):  
Chen Li ◽  
Sheng Ling Xiao ◽  
Shi Zhou You
Keyword(s):  
Raw Materials ◽  
Design Method ◽  
Wood Fiber ◽  
Influence Factors ◽  
Experimental Program ◽  
Linear Regression Method ◽  
Experiment Data ◽  
Plant Fiber ◽  
Experimental Design Method ◽  
Main Influence

Experiment design is to find the main influence factors through analysis of initial experiment data, which is an important foundation to further experiment .This paper studies a kind of biodegradable foam packaging material. It is composed of starch and plant fiber and PVA as raw materials by molding. Using of uniform experimental design method obtains the experimental program. And applying SAS software, selecting stepwise linear regression method analyzes on the experiment results. Analysis results indicate that the contents of starch, fiber and PVA have significant influence to material tensile strength and establish the regression model. This research lays the foundation and provides the theories basis for further studies.

Synthesis, Application of a Novel Halogen-Free Intumescent Flame Retardant Agent for Poplar Wood Veneer

2014 ◽  
Vol 1004-1005 ◽  
pp. 1022-1025
Author(s):  
Wang Wang Yu ◽  
Tao Huang ◽  
Wen Lei
Keyword(s):  
Flame Retardant ◽  
Oxygen Index ◽  
Raw Materials ◽  
Orthogonal Experiment ◽  
Influence Factors ◽  
Intumescent Flame Retardant ◽  
Limit Oxygen Index ◽  
Poplar Wood ◽  
Wood Veneer ◽  
Halogen Free

A novel non-halogen intumescent flame retardant agent (IFR) was prepared by using phosphoric acid, pentaerythritol and aniline as raw materials, a flame-retardant poplar wood veneer was prepared by treating the veneer with IFR. The influence factors of flame retardant processing technology on poplar wood veneer were studied by the orthogonal experiment. Flammability of the veneer was investigated by Limit Oxygen Index (LOI) test. The optimal impregnated time, impregnated temperature and impregnated concentration of IFR treated poplar wood veneer were 3h, 80°C and 18% respectively, which can make the veneer get the highest LOI of 46.7%.

Study on the Optimal Hydrolysis Conditions of Ganoderma lucidum Spore Powder under Microwave Irradiation

2014 ◽  
Vol 900 ◽  
pp. 293-296
Author(s):  
Bo Wu ◽  
Qing Hua Feng ◽  
Li Li Geng ◽  
Ke Wen Shu ◽  
Dong Zhang
Keyword(s):  
Reaction Time ◽  
Microwave Irradiation ◽  
Microwave Power ◽  
Ganoderma Lucidum ◽  
Orthogonal Experiment ◽  
Pure Water ◽  
Influence Factors ◽  
Weight Ratio ◽  
Hydrolysis Conditions ◽  
Main Influence

In this article, the main influence factors of ganoderma lucidum spore powder hydrolysis in pure water under microwave irradiation were studied by using the method of orthogonal experiment. Weight ratio of ganoderma lucidum spore powder to water, reaction time, microwave power and temperature was considered as the influence factors in detail. It was concluded that the temperature was the main factor in hydrolytic process. The order of the influence factors: temperature > weight ratio of ganoderma lucidum spore powder to water > microwave power > reaction time. And the optimal reaction condition was as the temperature 150 °C, weight ratio of ganoderma lucidum spore powder to water 1:40, microwave power 100 W and reaction time 105 min.

SIFAT MEKANIK PAPAN GYPSUM DARI SERBUK LIMBAH KAYU NON KOMERSIAL

2014 ◽  
Vol 6 (2) ◽  
pp. 1
Author(s):  
Saibatul Hamdi
Keyword(s):  
Raw Materials ◽  
Wood Particle ◽  
Quality Standards ◽  
Gypsum Board ◽  
Average Value ◽  
Wood Particles ◽  
Sawn Timber ◽  
Materials Used ◽  
Artocarpus Elasticus ◽  
Ficus Glomerata

The purpose of this research is to know the mechanical strength of gypsum board by utilizing waste sawn wood. Raw materials used consist of flour, gypsum,wood particles, boraks and kambang (Goniothalamus sp), wood tarap (Artocarpus elasticus REINW) and lua (Ficus glomerata ROXB). Wood particle 40 mesh and 60 mesh, concentrations boraks of 1 and 2 and the percentage particles of gypsum sawn timber is 300, 400 and 500%. The results showed that the average value Modulus of Rufture (MoR) in lua wood ranges from 12.55 – 14,47 kgcm2, wood kambang 25.10-31,11 kgcm2 and wood tarap 19.20- 24,18 kgcm2. As for Modulus of Elasticity (MoE) on the lua 1129,80- 2092,70 kgcm2, wood kambang 2512,37-3971,32 kgcm2 and tarap 2050,63-2691,09 kgcm2. Gypsum board are mechanical properties do not meet quality standards created SNI 03-6434-2000.Keywords: sawdust, lua, kambang, tarap, gypsum, mechanical

COMPARATIVE ANALYSIS OF BIOACTIVE SUBSTANCES CONTENT IN THE LEAVES AND FRUITS OF A ROWAN-TREE (SORBUS AUCUPARIA FRUCTUS) AND ASSESSMENT OF PROSPECTS IN MEDICINE AND PHARMACY

2020 ◽  
pp. 58-62
Author(s):  
Chernichkina A.D.
Keyword(s):  
Raw Materials ◽  
Wide Distribution ◽  
Biologically Active ◽  
Bioactive Substances ◽  
Plant Raw Materials ◽  
Mountain Ash ◽  
The Russian Federation ◽  
Materials Used ◽  
Active Substances ◽  
Pectin Substances

A large number of biologically active substances, organic acids, tannins, and pectin substances were detected during the study of fruits, leaves, and pulp of the fruits of mountain Ash. The content of these substances in leaves and pulp will significantly expand the arsenal of medicinal plant raw materials used. Given the wide distribution of mountain Ash in the territory of the Russian Federation, harvesting leaves from the same plants after harvesting the fruit and using pulp will make it possible to obtain new phytopreparations.

Mutual Influence Study of Food Acids and Polysaccharides of Different Nature on the Sensory Perception of Low-Calorie Sweet Dishes

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 71-78
Author(s):  
Ekaterina Minnikhanova ◽  
Nataliya Zavorokhina ◽  
Anna Gilina
Keyword(s):  
Mutual Influence ◽  
Raw Materials ◽  
Sucrose Solution ◽  
Complex Mixture ◽  
The Body ◽  
Sensory Characteristics ◽  
Apple Pectin ◽  
Low Calorie ◽  
Functional Reserves ◽  
Materials Used

Abstract The inclusion of polysaccharide thickeners in the recipes of sweet dishes increases the functional reserves of the body, contributes to the preservation of health and the prevention of diseases. The purpose of the research is to study the sensory characteristics of polysaccharides of various nature when combined with food acids, to develop a recipe for a basic mixture of low-calorie meals for public catering. The authors analyzed citric, lactic and succinic acids in combinations with polysaccharides of various nature. Organoleptic tests were evaluated by a touch panel. The organization of the tasting analysis corresponded to GOST ISO 6658-2016; the consistency was determined according to GOST 31986-2012, GOST ISO 11036-2017, GOST ISO 8588-2011. The optimal organoleptic combinations of the presented food acids and complex additives of sweeteners (CDP) were identified, which included aspartame, sodium saccharinate, Sucralose, sweetness coefficient – 340: the mixture with citric acid had a long pleasant aftertaste without foreign tastes and the best taste characteristics. Using the “A-not A” method, we found that the sample with the addition of CDP is identical to the sucrose solution. In the second part of the study, polysaccharides were added to model samples of acids with complex sweeteners; the best sensory characteristics were obtained by model samples consisting of a mixture of low-esterified Apple pectin with lactic acid and KDP. The technology of obtaining a stable elastic jelly using low-esterified Apple pectin has been developed, since the complex mixture of sweeteners and food acids does not have a dehydrating effect. Developed a dry mix recipe that can serve as a basic development, low-calorie sweet products for catering and has a variance of use of lactic and succinic acids, depending on the flavor characteristics of the raw materials used and its corrective ability.

DAMPAK SUBSITUSI IMPORT TERHADAP DEFISIT NERACA PERDAGANGAN: STUDI KASUS IMPOR KULIT INDONESIA

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Ivan Yulianto ◽  
Ario Seno Nugroho
Keyword(s):  
General Equilibrium ◽  
Foreign Exchange ◽  
Computable General Equilibrium ◽  
Trade Balance ◽  
Raw Materials ◽  
Import Substitution ◽  
Leather Industry ◽  
Materials Used ◽  
Net Export ◽  
Balance Deficit

An alternative strategy to reduce the trade balance deficit simultaneously to increase the net foreign exchange is the import-substitution for raw materials used to produce an export goods. This paper proposes an import substitution study on footwear products that have a dependency on imported raw materials by 70 percent, with the largest composition being leather raw materials by 67 percent. This paper analyzes the relationship between subsidies on the leather industry to leather import-substitution, multiplier effect to footwear sector, and Indonesia trade balance. Author make use of simulation the on Input-Output 2010 table and Computable General Equilibrium (CGE) Model. The simulation shows 100 billion subsidies on the leather sector, lead for the substitution-import of leather by 7,94 million rupiah, increase the net export foreign exchange by 1.1 billion rupiah of the footwear sector, and for overall, increase Indonesia trade balance deficit by 68 billion rupiah. Keywords: Computable General Equilibrium, footwear, leather, net foreign exchange, subsidy.ABSTRAK: Salah satu terobosan untuk mengurangi defisit neraca perdagangan dan meningkatkan nilai neto devisa ekspor adalah dengan substitusi impor bahan baku yang digunakan untuk memproduksi barang ekspor. Paper ini mengusulkan kajian substitusi impor pada produk alas kaki yang mempunyai ketergantungan bahan baku impornya sebesar 70 persen, dengan komposisi terbesar adalah bahan baku kulit sebesar 67 persen. Tujuan penelitian ini adalah untuk mengetahui dampak stimulus subsidi pada industri kulit terhadap subtitusi impor kulit, dukungan multiplier sektor kulit terhadap sektor alas kaki, serta terhadap devisa ekspor Indonesia. Penelitian ini menggunakan simulasi model Computable General Equilibrium (CGE). Hasil simulasi menunjukkan stimulus subsidi sebesar 100 milyar rupiah pada sektor kulit memberikan substitusi bahan baku kulit sebesar 7,94 juta rupiah, menaikkan devisa ekspor sektor alas kaki sebesar 1.1 miliar rupiah, serta secara keseluruhan menambah defisit neraca berjalan Indonesia sebesar 68 miliar rupiah. Kata kunci: alas kaki, Computable General Equilibrium (CGE), devisa ekspor, kulit, subsidi.

New surface treatment techniques to minimize copper alloy leaching in drinking water

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Norikazu Sugaya
Keyword(s):  
Surface Treatment ◽  
Raw Materials ◽  
Organic Film ◽  
Forming Process ◽  
Mixed Acid ◽  
Treatment Techniques ◽  
Acid Washing ◽  
Washing Process ◽  
Film Forming ◽  
Materials Used

This new surface treatment is simple and easy as well as low in cost. The processes can even be performed by hand. Pharmaceutical raw materials used for the surface treatment, such as hydrochloric acid and nitric acid used in a mixed acid washing process and vegetable oil used in an organic film forming process, are easily obtained in many countries.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Evolution of Internal Stress in Heterogeneous Electrode Composite during the Drying Process

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1683
Author(s):  
Zuoquan Zhu ◽  
Yaolong He ◽  
Hongjiu Hu ◽  
Fangzhou Zhang
Keyword(s):  
Internal Stress ◽  
Vinylidene Fluoride ◽  
Influence Factors ◽  
Lithium Ion ◽  
Integrated Analysis ◽  
Drying Time ◽  
Component Distribution ◽  
Poly Vinylidene Fluoride ◽  
Inactive Ingredients ◽  
Main Influence

The mechanical behavior of electrode composite during the drying preparation has played a crucial role in the electrochemical performance of lithium-ion batteries (LIBs). Our work aimed at developing an integrated analysis method to study the component distribution, mechanical properties, and internal stress of composite coating in the process of electrode drying. The main influence factors of drying stress were thoroughly investigated. It was found that this present model could capture not only the heterogeneity effect of inactive ingredients but also the porosity-dependent viscoelasticity of electrode composite. Meanwhile, the calculated effective modulus and stress evolution upon drying time were in acceptable accord with the experimental data. Furthermore, the rapid solidification markedly increased the drying stress in electrodes and significantly impaired the tensile strength of electrode composite due to the highly gradient distributed constituents. However, the stress level at high drying temperature could be significantly reduced by an aqueous sodium alginate binder instead of poly(vinylidene fluoride). The obtained results will be a great help in efficiently manufacturing LIB electrodes with adequate mechanical integrity.

Sign in / Sign up

Export Citation Format

Share Document