Preparation and Characterization of PET/MMT Nanocomposition Modified by MDI

2014 ◽  
Vol 904 ◽  
pp. 7-9
Author(s):  
Xiao Hua Gu ◽  
Xi Wei Zhang ◽  
Bao Yun Xu ◽  
Peng Zeng
Keyword(s):  
Thermal Stability ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermogravimetric Analyzer ◽  
Organic Montmorillonite ◽  
Polymerization Method ◽  
Thermal Stability Of

In this paper, the diphenyl methane diisocyanate (MDI) was used to modify montmorillonoid (MMT) and got the organic montmorillonite (OMMT), which was used with the monomers of PET by in situ polymerization method to prepare PET/MMT nanocomposition. The OMMT was analyzed by the X ray diffraction (XRD) to test the change of the spacing layer. Dispersion of MMT in the PET/MMT nanocomposites were studied with XRD and SEM and by means of thermogravimetric analyzer (TGA) on the thermal stability of PET/MMT nanocomposites. The results showed that, MDI modified MMT successfully, and the compatibility of MMT and PET was increased .

Synthesis, Characterization and Thermal Analysis of Rod-Shaped Polyaniline-Barium Ferrites Nanocomposites

2010 ◽  
Vol 150-151 ◽  
pp. 386-390
Author(s):  
Yuan Xun Li ◽  
Ying Li Liu ◽  
Huai Wu Zhang ◽  
Wei Wei Ling
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Barium Ferrite ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Barium Ferrites ◽  
Thermal Stability Of

The rod-shaped polyaniline (PANI)-barium ferrite nanocomposites were synthesized by in situ polymerization of aniline in the presence of BaFe12O19 nanoparticles with diameters of 60-80 nm. The composites obtained were characterized by infrared spectra (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The thermal stability and the composition of the composites were investigated by TG-DTG analysis. The results indicate that the thermal stability of the composites is higher than that of the pure PANI which can be attributed to the interactions existed between PANI chains and ferrite particles.

Preparation and Characterization of Polyacrylonitrile-Metal-O-MMT Nanocomposites

2011 ◽  
Vol 221 ◽  
pp. 316-320
Author(s):  
Hui Xia Feng ◽  
Gong Wei Fu ◽  
Yi Wang ◽  
Na Li Chen ◽  
Rui Chen Yang
Keyword(s):  
Thermal Stability ◽  
Powder Diffraction ◽  
Interlayer Space ◽  
In Situ Polymerization ◽  
X Ray ◽  
Thermal Stability Of ◽  
Better Than ◽  
Montmorillonite Nanocomposites

Polyacrylonitrile-metal-O-montmorillonite nanocomposites were prepared by means of in situ polymerization. The Na-montmorillonite was modified by quaternary ammonium salt after the exchange of its interlayer cations with Ni2+. Infrared spectra and X-ray powder diffraction were employed to characterize the obtained polyacrylonitrile-metal-O-montmorillonite. The results of FTIR show that metal-O-montmorillonite has been concerned with the polymerization of PAN. The result of X-ray powder diffraction shows that the inserting of the acrylonitrile monomer can enlarge the interlayer space of montmorillonite. It is also shown that the polyacrylonitrile-metal-O- montmorillonite nanocomposites have been synthesized. The thermal stability of PAN /MMT is better than that of pure PAN.

Synthesis and Characterization of the PANI/ITO Conducting Nanocomposites

2010 ◽  
Vol 663-665 ◽  
pp. 542-545 ◽  
Author(s):  
Bing Jie Zhu ◽  
Xin Wei Wang ◽  
Mei Fang Zhu ◽  
Qing Hong Zhang ◽  
Yao Gang Li ◽  
...  
Keyword(s):  
Doping Concentration ◽  
In Situ Polymerization ◽  
Synthesis And Characterization ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Conductivity ◽  
Scanning Electron

The PANI/ITO conducting nanocomposites have been synthesized by in-situ polymerization. The obtained nanocomposites were characterized by X-ray diffraction pattern, scanning electron microscopy and Fourier transform infrared. Electrical conductivity measurements on the samples pressed into pellets showed that the maximum conductivity attained 2.0 ± 0.05 S/cm for PANI/ITO nanocomposites, at ITO doping concentration of 10 wt%. The results of the present work may provide a simple, rapid and efficient approach for preparing PANI/ITO nanocomposites.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

In Situ Polymerization and Characterization of Poly(ε-caprolactone)/Layered Double Hydroxide Nanocomposites

2012 ◽  
Vol 557-559 ◽  
pp. 371-374
Author(s):  
Lian Liu ◽  
Teng Yu ◽  
Pei Wang ◽  
Guang Shuo Wang
Keyword(s):  
Layered Double Hydroxide ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Uv Visible ◽  
Absorbance Peak ◽  
Double Hydroxide

Nanocomposites of poly(ε-caprolactone) (PCL) and layered double hydroxide (LDH) were prepared by in situ polymerization at low LDHs loadings in this work. The resultants were characterized by FTIR spectroscopy, X-ray diffraction (XRD), differential scanning calorimeter (DSC) and UV-visible spectroscopy (UV-vis). FTIR showed that the PCL/LDHs nanocomposites were prepared successfully by in situ polymerization and XRD spectra showed that the crystal structure did not change greatly in the presence of LDHS. DSC results confirmed that LDHs could act as nucleating agents. UV-vis spectra showed that LDHs had stronger absorbance peak than LDH. Moreover, the PCL/LDHs nanocomposites had strong anti-ultraviolet effect by introduction of LDHs into polymer matrix.

scholarly journals The In Situ Polymerization and Characterization of PA6/LiCl Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Dandan Sun ◽  
Jiang Li ◽  
Qinghua Pan ◽  
Chaowei Hao ◽  
Guoqiao Lai
Keyword(s):  
Sodium Hydroxide ◽  
Anionic Polymerization ◽  
In Situ Polymerization ◽  
Degree Of Crystallinity ◽  
Inorganic Salts ◽  
X Ray Diffraction ◽  
X Ray ◽  
Phase Proportion

PA6/LiCl composites were synthesized by in situ anionic polymerization based on the interaction between the inorganic salts and PA6. Sodium hydroxide as initiator and N-acetylcaprolactam as activator were used in the preparation of PA6/LiCl composites with variety of LiCl content. X-ray diffraction (XRD) and differential scanning calorimeter (DSC) testing results showed that both of degree of crystallinity and melting temperature of the composites were decreased under the influence of LiCl. And theγcrystal phase proportion increased with increasing the LiCl content to appropriate amount.

scholarly journals Investigation of thermal stability of Cu/W multilayers by in situ X-ray diffraction

2016 ◽  
Vol 72 (a1) ◽  
pp. s418-s418 ◽  
Author(s):  
Claudia Cancellieri ◽  
Frank Moszner ◽  
Mirco Chiodi ◽  
Songhak Yoon ◽  
Daniel Ariosa ◽  
...  
Keyword(s):  
Thermal Stability ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Stability Of

scholarly journals Thermal and electrical properties of polyimide/PANI nanofiber composites prepared via in situ polymerization

2018 ◽  
Vol 36 (2) ◽  
pp. 283-287
Author(s):  
Aseel A. Kareem
Keyword(s):  
In Situ Polymerization ◽  
Composite Films ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
Nanofiber Composite ◽  
X Ray ◽  
Thermal And Electrical Properties ◽  
Ft Ir ◽  
Thermal Stability Of

Abstract Polyimide/polyaniline nanofiber composites were prepared by in situ polymerization with various weight percentages of polyaniline (PANI) nanofibers. X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), proved the successful preparation of PANI nanofiber composite films. In addition, thermal stability of PI/PANI nanofiber composites was superior relative to PI, having 10 % gravimetric loss in the range of 623 °C to 671 °C and glass transition temperature of 289 °C to 297 °C. Furthermore, the values of the loss tangent tanδ and AC conductivity σAC of the nanocomposite films were notably higher than those of pure polyimide. The addition of 5 wt.% to 15 wt.% PANI nanofiber filler enhanced the activation energy of PI composites from 0.37 eV to 0.34 eV.

scholarly journals Synthesis and Characterization of New Polyimide/Organoclay Nanocomposites Containing Benzophenone Moieties in the Main Chain

2017 ◽  
Vol 57 (2) ◽  
Author(s):  
Khalil Faghihi ◽  
Mostafa Ashouri ◽  
Akram Feyzi
Keyword(s):  
Main Chain ◽  
In Situ Polymerization ◽  
Clay Content ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

<p>A series of nanocomposites consist of organic polyimide and organo-modified clay content varying from 0 to 5 wt%, were successfully prepared by in situ polymerization. Polyimide used as a matrix of nanocomposite was prepared through the reaction of 1,4-bis [4-aminophenoxy] butane (APB) and 3،3΄،4،4΄-benzophenone tetra carboxylic dianhydride (BTDA) in N,N-dimethylacetamide (DMAc). The resulting nanocomposite films were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA).</p>

Sign in / Sign up

Export Citation Format

Share Document