A SoC Controller for Energy Saving and Environmental Protection

2014 ◽  
Vol 908 ◽  
pp. 477-480
Author(s):  
Li Min Liu
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Intelligent Control ◽  
Intelligent Systems ◽  
Environment Pollution ◽  
Industrial Automation ◽  
Industrial Emission ◽  
Software And Hardware ◽  
Intelligent Technology ◽  
Energy Saving Control

The energy saving is helpful to decrease industrial emission and environment pollution. An energy saving control based on intelligent technology is a new direction of automation. An intelligent control is composed of algorithm, software and hardware. SoC is one of the most advanced hardware. SoC may get some new progress for energy saving control. In this paper, energy saving, intelligent systems and some SoC controller are discussed. The SoC controller may be more efficient for industrial automation and energy saving.

Research of Water Heater Automatic System

2011 ◽  
Vol 301-303 ◽  
pp. 373-376
Author(s):  
Ting Jun Li ◽  
Qin Xu ◽  
Jian Cun Ren ◽  
Bing Zhi Huang ◽  
Ming Bo Zhu
Keyword(s):  
Solar Energy ◽  
Energy Saving ◽  
Environmental Protection ◽  
Automatic System ◽  
Solar Water Heater ◽  
Water Heater ◽  
Solar Water ◽  
Software And Hardware

With environmental protection, energy saving awareness has enhanced, the use of solar energy has become a trend. Designing a large solar water heater automatic system, which adapts for heating and bathing. It introduces the system’s form, and the study of software and hardware. The system achieves a complementarily to the light, heat and electricity, and achieves the measurement, display of temperature and water.

Research on Energy-Saving Control Technology of Boiler

2011 ◽  
Vol 383-390 ◽  
pp. 2603-2607
Author(s):  
Yao Yi ◽  
Guang Jian Chen ◽  
Jin Ling Jia
Keyword(s):  
Energy Saving ◽  
Intelligent Control ◽  
Flue Gas ◽  
Combustion Efficiency ◽  
Wind Pressure ◽  
Boiler Furnace ◽  
Door Opening ◽  
Boiler Efficiency ◽  
Secondary Air ◽  
Energy Saving Control

Focusing on energy-saving issues of boiler, this paper finds out the combustion conditions inside boiler furnace by monitoring and analysis on oxygen content of flue gas, carbon content of fly ash, CO and CO2 contents. The intelligent control of boiler combustion was achieved and combustion efficiency was rosen. Using neural network controlling model, automatic optimization of oxygen delivery volume,coal delivery volume, the total wind pressure of primary air, the secondary air-door opening degree and furnace negative pressure were achieved, and the boiler efficiency increasing by 5 ~ 7%.

A SoC for Intelligent Control Systems

2012 ◽  
Vol 571 ◽  
pp. 514-517 ◽  
Author(s):  
Zheng Xing Zheng ◽  
Guo Min Tang ◽  
Li Min Liu
Keyword(s):  
Control System ◽  
Embedded System ◽  
Control Systems ◽  
Intelligent Control ◽  
Industrial Automation ◽  
Intelligent Controller ◽  
Intelligent Control System ◽  
Intelligent Control Systems ◽  
Software And Hardware

Intelligent control is a new direction of industrial automation. An intelligent control system is composed of algorithm, software and hardware. SoC is one of the best embedded system hardware. SoC may get some new progress for intelligent control. In this paper, intelligent control, SoC and some intelligent controller based on SoC are discussed. The new controller can be the smaller and more reliable.

The Energy-Saving Control of Combined Multi-Unit for Building Automatic System in the Subway

2014 ◽  
Vol 513-517 ◽  
pp. 3597-3600 ◽  
Author(s):  
Zhong Jin Shi ◽  
Bing Xu ◽  
Bao Guo Zheng ◽  
Xue Han Zhu
Keyword(s):  
Energy Saving ◽  
Automatic System ◽  
Intelligent Systems ◽  
Multi Agent System ◽  
Operating Characteristics ◽  
Equipment Operation ◽  
Actual Environment ◽  
Multi Agent ◽  
Distributed Intelligent Systems ◽  
Energy Saving Control

Multi-unit operation in building automatic system (BAS) is an important part for the equipment operation; it is essentially a distributed multi agent system (MAS). In this paper, Petri net is adopted to establish the control model about the equipment operation in BAS, know the operating characteristics and start-stop conditions of energy consumption equipment in the rail which are in under different circumstances. Based on the analysis of BAS and the theory of distributed intelligent systems, according to the actual environment and energy requirements, the start-stop arrays are selected dynamically as the basis for the units operating, and ultimately achieve energy-saving operation of multi-unit control purposes.

scholarly journals Discussion on the Design of Electrical Energy-Saving Engineering in Intelligent Building

2020 ◽  
Vol 2 (1) ◽  
pp. 1
Author(s):  
Jian Yin ◽  
Junqin Liu ◽  
Jing Yang ◽  
Tao Lyv ◽  
Xiaohan Zhang
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Intelligent Design ◽  
Rapid Development ◽  
Electrical Energy ◽  
Intelligent Building ◽  
Healthy Development ◽  
Intelligent Buildings ◽  
Process Of Urbanization ◽  
Intelligent Technology

<p>With the rapid development of science and technology in our country, in order to comply with the trend of environmental protection, new requirements are put forward for the design of electrical energy saving of intelligent buildings in the process of urbanization. This paper mainly analyzes the significance of intelligent design of building electrical, analyzes the problems existing in the current intelligent technology design, and puts forward corresponding solutions to specific problems, hoping to provide some help to everyone in the intelligent design of building electrical, so as to promote the healthy development of electrical industry in China.</p>

Development of Energy Saving Control System for Street Lamps Based on SCM

2011 ◽  
Vol 291-294 ◽  
pp. 2838-2841
Author(s):  
Shuang Li An ◽  
Rui Qian ◽  
Xiang Yu Lu ◽  
Yuan Lu
Keyword(s):  
Energy Saving ◽  
Intelligent Control ◽  
Smart Sensor ◽  
Light Control ◽  
Single Chip ◽  
Single Chip Microcomputer ◽  
Turn On ◽  
Wireless Transceiver ◽  
Energy Saving Control ◽  
Rainy Days

This paper presents a proposed energy saving system for street lamps based on single-chip microcomputer. In this case, light control timer, smart sensor, wireless transceiver, microcontroller smart regulator and other related techniques are utilized to fullfil a ‘green lighting project’. It can not only automatically turn on or off the master switch according to the local sunrise and sunset, and sooner or later, sunny day, rainy days or the actual brightness of the different lamps, but also control each single lamp intelligently. The system can be widely used in road and tunnel lighting, building lighting, and other fields as well as a variety of energy-saving control dimming voltage based intelligent control areas.

Design of Intelligent Energy-Saving Control System Based on Pyroelectrical Sensor

2014 ◽  
Vol 556-562 ◽  
pp. 2422-2425
Author(s):  
Qiu Jie Zhang ◽  
Cao Feng Yu ◽  
Qing Qing Huang
Keyword(s):  
Control System ◽  
Energy Saving ◽  
Intelligent Control ◽  
Simple Structure ◽  
Low Cost ◽  
Human Movement ◽  
Infrared Sensor ◽  
Reliable Performance ◽  
Working Principle ◽  
Energy Saving Control

The control system uses pyroelectric infrared sensor as the detecting element, STC89C52RC microcontroller as the control core, to detect and determine the direction of human movement, demographics and intelligent control of indoor appliances. This control system has simple structure, reliable performance, low cost, it can be used in homes, school classrooms, large venue and other places, has good prospects. This article elaborates from the working principle, hardware circuits, program design and other aspects.

Classroom Lighting Energy-Saving Control System Based on Machine Vision Technology

2018 ◽  
pp. 143-149 ◽  
Author(s):  
Ruijie CHENG
Keyword(s):  
Control System ◽  
Machine Vision ◽  
Energy Saving ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Lighting Control ◽  
Lighting Energy ◽  
Neural Network Algorithm ◽  
Energy Saving Control ◽  
Model Algorithm

In order to further improve the energy efficiency of classroom lighting, a classroom lighting energy saving control system based on machine vision technology is proposed. Firstly, according to the characteristics of machine vision design technology, a quantum image storage model algorithm is proposed, and the Back Propagation neural network algorithm is used to analyze the technology, and a multi­feedback model for energy­saving control of classroom lighting is constructed. Finally, the algorithm and lighting model are simulated. The test results show that the design of this paper can achieve the optimization of the classroom lighting control system, different number of signals can comprehensively control the light and dark degree of the classroom lights, reduce the waste of resources of classroom lighting, and achieve the purpose of energy saving and emission reduction. Technology is worth further popularizing in practice.

Analysis and Design of Environmental Protection and Energy Saving in Modern Society Building

2014 ◽  
Vol 908 ◽  
pp. 355-358
Author(s):  
Jie Zhao
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Architectural Design ◽  
New Technology ◽  
Modern Society ◽  
Modern Architecture ◽  
Analysis And Design ◽  
The People ◽  
Development Direction ◽  
Design Requirements

With the development of economy and the improvement of people's living level, improving living conditions and public buildings, architectural design requirements are also constantly improved. Modern architecture should consider not only beautiful and comfortable, but also take into account the design individuality, while taking into consideration the people-oriented design concept of environmental protection and energy saving. This also makes the environmental friendly and energy-saving building is the development direction of future architecture. This paper analyzes the modern architecture of the ecological and environmental protection, gives the method to realize the construction of energy-saving environmental protection design and the use of new materials, new equipment and new technology of the existing.

Features and Construction of Prefabricated Buildings

2014 ◽  
Vol 580-583 ◽  
pp. 2262-2265
Author(s):  
Yu Hong Zhao
Keyword(s):  
Energy Saving ◽  
Environmental Protection ◽  
Industrial Production ◽  
Low Cost

Prefabricated buildings have the advantages of convenient construction, low cost, energy saving and environmental protection, etc., it is suitable for industrial production of buildings, lifting and connections of prefabricated components are key to construct the prefabricated buildings.

Sign in / Sign up

Export Citation Format

Share Document