The Three-Dimensional Similar Simulation of Stress Regular Pattern of Roof of Large Mining Height

2014 ◽  
Vol 945-949 ◽  
pp. 1190-1195 ◽  
Author(s):  
Xiao Tao Zeng ◽  
Ning Wang ◽  
Cong Jiang ◽  
Yun Yi Zhang ◽  
Gang Chen
Keyword(s):  
Three Dimensional ◽  
Mining Area ◽  
In Situ Stress ◽  
Stimulation Test ◽  
Mine Pressure ◽  
Pressure Behavior ◽  
Working Face ◽  
Large Mining Height ◽  
Roadway Deformation ◽  
Mining Height

Based on the distribution of in-situ stress and the special conditions of the large mining height in one mining area, the author conducted the analogy stimulation test of the mine pressure behavior and the roadway deformation law. This research, mainly based on the geographical conditions of 1 to 2 coal seam of this mining area, stimulated the mine pressure behavior of the working face and the roadways, as the mining height is 5meters and 6meters. Through this analogy stimulation test, the mine pressure behavior of working face, in the mining process with large mining height, is analyzed and summarized.

scholarly journals Research on Surface Failure Law of Working Faces in Large Mining Height and Shallow Buried Coal Seam

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Zhenhua Li ◽  
Yingkun Pang ◽  
Yongsheng Bao ◽  
Zhanyuan Ma
Keyword(s):  
Near Field ◽  
Mining Area ◽  
Surface Cracks ◽  
Large Space ◽  
Key Strata ◽  
Key Stratum ◽  
Surface Failure ◽  
Working Face ◽  
Large Mining Height ◽  
Mining Height

In the process of high-intensity and large-space mining in Shendong mining area, various surface cracks are generated on the surface, resulting in serious damage to the surface buildings and the local ecological environment. To study the influence of overlying rock movement on surface failure of near-field single key strata of near-shallow buried and large mining height working face, the relationship between overburden movement, strata pressure appearance, and surface failure at working face 52307 in Daliuta mining area was analyzed by field measurement and numerical simulation. The results show the following: (1) there is only one thick and hard key stratum in the overburden of large mining height and near-shallow buried working face. Under the condition of presplitting roof blasting, the first weighting step is still as high as 95 m, and the periodic breaking step of roof is 20–30 m. During the weighting, the working resistance of support is still close to the rated resistance. (2) The single key stratum plays an obvious role in controlling overburden movement. After the first weighting of the working face, a stepped subsidence crack appears on the surface within a short time, and the crack lags behind the working face for about 5 m. (3) During each periodic weighting process, the breaking and subsidence of key blocks are accompanied by surface cracks.

scholarly journals Control of Gob-Side Roadway with Large Mining Height in Inclined Thick Coal Seam: A Case Study

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Xie Fuxing
Keyword(s):  
Numerical Simulation ◽  
Coal Pillar ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Mine Pressure ◽  
Thick Coal Seam ◽  
Working Face ◽  
Rock Structure ◽  
Large Mining Height ◽  
Mining Height

The gob-side roadway of 130205, a large-mining-height working face in the Yangchangwan coal mine, was investigated in terms of the mine pressure law and support technology for large mining heights and narrow coal pillars for mining roadways. The research included field investigations, theoretical analysis, numerical simulation, field tests, and other methods. This paper analyzes the form of movement for overlying rock structure in a gob-side entry with a large mining height and summarizes the stress state and deformation failure characteristics of the surrounding rock. The failure mechanism of the surrounding rock of the gob-side roadway and controllable engineering factors causing deformation were analyzed. FLAC3D numerical simulation software was used to explore the influence law of coal pillar width, working face mining height, and mining intensity on the stability of the surrounding rock of the gob-side roadway. Ensuring the integrity of the coal pillar, improving the coordination of the system, and using asymmetric support structures as the core support concept are proposed. A reasonably designed support scheme for the gob-side roadway of the working face for 130205 was conducted, and a desirable engineering effect was obtained through field practice verification.

scholarly journals Research on Overburden Movement Characteristics of Large Mining Height Working Face in Shallow Buried Thin Bedrock

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4208 ◽  
Author(s):  
Qingxiang Huang ◽  
Yanpeng He
Keyword(s):  
Physical Simulation ◽  
Mining Area ◽  
Engineering Problem ◽  
Dynamic Crack ◽  
Working Face ◽  
Time Space ◽  
Movement Distance ◽  
Large Mining Height ◽  
Thin Bedrock ◽  
Mining Height

The overburden movement of the large mining height working face of shallow buried thin bedrock (SBTB) is a complex engineering problem with “time-space-intension”, which is of great significance to realize efficient and safe mining in the northern Shaanxi mining area. Based on the research object of No. 22201 working face in Zhangjiamao Coal Mine, the roof structure characteristics of large mining height working face in SBTB are researched by field drilling measurement, laboratory test, physical and numerical simulation. The results show that: (1) Based on the measured data of the drillholes, it is concluded that under the mining conditions of SBTB with large mining height, the roof movement is ahead of the weighting of the working face, and the working resistance has a significant time effect. The advanced movement distance is about 20 m, which can be used as an early warning index of the weighting. The lag movement distance in the roof with horizon of 30 m is two periodic weighting intervals, which are about 26 m. (2) The first weighting interval of the working face is 32 m. The roof first break has obvious step sinking phenomenon, and the measured surface appears at a position 45 m away from the transport slot. It is statistically concluded that the periodic weighting interval is 9.5~16.5 m, the average weighting interval is 13 m, which is equivalent to the periodic dynamic crack spacing of the surface. (3) The results of field measurement and physical simulation show that the breaking angle of the roof of the No. 22201 large mining height is about 66°, and the periodic stepping distance of the T-junction suspension area is 6~8m. Along the strike of the working face, the roof breaking is mainly arc arched. The research results ensure the safe and green mining of shallow coal seam.

scholarly journals Prevention Technology for Strong Mine Pressure Disaster in the Hard-Roof Large-Mining-Height Working Face

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Hongfei Duan ◽  
Lijuan Zhao
Keyword(s):  
Hydraulic Fracturing ◽  
Hard Rock ◽  
Mine Pressure ◽  
Overburden Rock ◽  
Large Area ◽  
Rock Stratum ◽  
Hard Roof ◽  
Working Face ◽  
Large Mining Height ◽  
Mining Height

The movement and destruction of the hard roof in a stope is an important reason for the occurrence of strong ground pressure disasters at the working face. Considering Tongxin Coal Mine as the engineering background, the stress distribution law of the surrounding rock and the overburden rock damage characteristics of a large-mining-height working face under the hard roof were investigated. To solve the problem whereby the stope’s hard roof is difficult to collapse, the hard rock key stratum of the roof was hydraulically fractured to weaken the mechanical properties of the roof rock stratum. Additionally, microseismic monitoring technology was used to monitor the cracking effect of the rock stratum. The theoretical calculation and numerical simulation results reveal that, after hydraulic fracturing, a crack with a more consistent trend formed inside the hard rock stratum and a large area of the rock stratum was damaged. According to the monitoring results of the stope stress after hydraulic fracturing, the law governing the occurrence of the leading bearing pressure was in effect. In contrast, the influence range and peak strength of the leading bearing pressure were considerably reduced at the working face after hydraulic fracturing. After performing hydraulic fracturing on the roof of the working face, the bearing pressure of the working face can satisfy the production requirements better. Finally, the results obtained through this study can be used as a reference for determining the width of coal pillars under similar mining conditions.

scholarly journals Effect of Face Length in Initial Mining Stage of Fully Mechanized Top-coal Caving Face With Large Mining Height

2021 ◽  
Author(s):  
Jianhang Wang ◽  
Yao Lu ◽  
CHANGXIANG WANG ◽  
Guangwei Xu ◽  
Chengran Zhang
Keyword(s):  
Mine Pressure ◽  
Pressure Behavior ◽  
Working Face ◽  
Face Length ◽  
The Face ◽  
Large Mining Height ◽  
Strata Behavior ◽  
Working Resistance ◽  
The Relationship ◽  
Surface Length

Abstract Based on the field measurement of the end resistance of the support during the initial weighting of the basic roof and the macroscopic mine pressure behavior during the weighting period of 101,22211,103 and 301 fully mechanized caving face in Changchun Xing Coal Mine, the mine pressure law of the working face is summarized and compared, and the relationship between the working face length and the working resistance of the support ( the weighting strength ) and the macroscopic mine pressure behavior is obtained. In the range of face length 126-230 m, with the increase of face length, the end-of-cycle resistance of the support gradually increases and the dynamic load coefficient of the support gradually increases when the coefficient of the support gradually increases, and the strata behavior of the working face changes from strong to very strong. When the face length is short ( 126-140.5m ), the hanging top area is too large to cause hurricanes when the working face is pressed, which threatens and damages the personal safety and equipment of the working face staff. Based on the above research, the problem of optimizing the surface length is proposed, and the surface length is determined to be within the range of 140-230 m according to the measured results.

scholarly journals Study on Fracture and Stress Evolution Characteristics of Ultra-Thick Hard Sandstone Roof in the Fully Mechanized Mining Face with Large Mining Height: A Case Study of Xiaojihan Coal Mine in Western China

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Feng Ju ◽  
Meng Xiao ◽  
Zequan He ◽  
Pai Ning ◽  
Peng Huang
Keyword(s):  
High Strength ◽  
Western China ◽  
Stress Evolution ◽  
Working Face ◽  
Mining Condition ◽  
Evolution Characteristics ◽  
Large Mining Height ◽  
Evolution Laws ◽  
Mining Face ◽  
Mining Height

Ultra-thick hard sandstone roofs present high thickness, poor delamination, and wide caving range. The strata pressure of the working face during actual mining increases, having a significant influence on the safe mining of the working face. Especially, in the mining areas of western China, the fully mechanized mining faces with high mining height and high-strength mining are more prominent. Understanding the fractures and stress evolution characteristics of the ultra-thick hard sandstone roof during actual mining is of high significance to control the dynamic pressure on the working face. In this paper, the typical ultra-thick hard sandstone roof of the Xiaojihan coal mine was taken as an example. The structural and chemical composition characteristics were analyzed. Besides, the fracture characteristics of ultra-thick hard roof during the working face mining were analyzed. Moreover, the fracture structure consistency was verified through physical simulation and a field measurement method. Finally, the stress evolution laws in the ultra-thick hard sandstone roof fracture were studied through numerical simulation. The findings demonstrated that (1) the ultra-thick hard sandstone roof was composed of inlaid coarse minerals, which had compact structure, while the Protodyakonov hardness reached up to 3.07; (2) under the high-strength mining condition of fully mechanized mining face with large mining height, the ultra-thick hard sandstone roof had the characteristics of brittle fracture, with a caving span of 12 m; (3) under the high-strength mining condition of fully mechanized mining face with large mining height, the ultra-thick hard sandstone roof followed the stress evolution laws that were more sensitive to the neighboring goaf. Therefore, it was necessary to reduce the fracture span or layering of ultra-thick hard sandstone roof through the manual intervention method adoption or increase either the strength of coal pillar or supporting body, to resist the impact generated during ultra-thick hard sandstone roof fracture.

scholarly journals Determination of Optimal Extrication Location of High Extraction Roadway of Large-Mining-Height Fully Mechanized Face

2018 ◽  
Vol 2018 ◽  
pp. 1-7
Author(s):  
Xue-bo Zhang ◽  
Ming Yang
Keyword(s):  
Gas Extraction ◽  
Horizontal Distance ◽  
High Position ◽  
Working Face ◽  
Extraction Site ◽  
Large Mining Height ◽  
Porosity And Permeability ◽  
Permeability Distribution ◽  
Mining Height

Determining the optimal extrication location of the high extraction roadway can improve the gas extrication effect of highly gassy mine and solve the problem of gas concentration overrun at the upper corner, which is of great significance to safety and efficient mine production. According to the actual situation of mine, the gas gushing amount in the goaf, pressure difference at both ends of the working face, the 3D porosity, and permeability distribution of the caving zone and fissure zone were obtained by field measurement and numerical calculation. Through theoretical calculation, the proper extraction site of a high-position alley was determined. On this basis, the optimal extraction site of a high-position alley was determined by numerical analysis of the gas extraction effect at different sites. The results show that as the perpendicular distance between high-position alley and goaf floor increases, the gas extraction amount increases first and then decreases. The concentration of extraction gas gradually increases, and the increasing trend is gradually diminished. With the increase of the horizontal distance between the air return way and the high-position alley, the gas extraction amount and gas extraction concentration increase first and then decrease. The optimal extraction site of a high-position alley should be 39 m vertically away from the goaf floor and 30 m horizontally away from the air return way.

Sign in / Sign up

Export Citation Format

Share Document