Effect of Molarity of Precursor Solution on Nanocrystalline Zinc Oxide Thin Films

2009 ◽  
Vol 293 ◽  
pp. 99-105 ◽  
Author(s):  
Girjesh Singh ◽  
S.B. Shrivastava ◽  
Deepti Jain ◽  
Swati Pandya ◽  
V. Ganesan

During the last two decades, the use of transparent conducting films of non-stoichiometric and doped metallic oxides for the conversion of solar energy into electrical energy has assumed great significance. A variety of materials, using various deposition techniques, has been tried for this purpose [1-3]. Among these various materials, zinc oxide (ZnO) is one of the prominent oxide semiconductors suitable for photovoltaic applications because of its high electrical conductivity and optical transmittance in the visible region of the solar spectrum [4]. Furthermore, thin films of ZnO have shown good chemical stability against hydrogen plasma, which is of prime importance in a-Si:H-based solar-cell fabrication. Thus, zinc oxide can serve as a good candidate for replacing SnO2 and indium tin oxide (ITO) films in Si:H-based solar cells. One of the outstanding features of ZnO is its large excitonic binding energy, i.e. 60meV, leading to the existence of excitons at room temperature and even at higher temperatures [5-8]. These unique characteristics have generated a wide range of applications of ZnO. For example, gas sensors [9], surface acoustic devices [10], transparent electrodes and solar cells. Many techniques are used for preparing the transparent conducting ZnO films, such as RF sputtering [11], evaporation [12], chemical vapour deposition [13], ion beam sputtering [14] and spray pyrolysis [15–18]. Among these, the spray pyrolysis technique has attracted considerable attention due to its simplicity and large-scale production combined with low-cost fabrication. By using this technique, one can produce large-area coatings without any need for ultra-high vacuum. Thus, the capital cost and the production cost of high-quality zinc oxide semiconductor thin films are lowest among all other techniques. In the present work, we have synthesized ZnO films by using the spray pyrolysis technique. A number of films have been prepared by changing the molarity of the precursor solution. The prepared films have been characterized with regard to their structural, morphological and electrical properties.

2010 ◽  
Vol 7 (1) ◽  
pp. 69-75
Author(s):  
Baghdad Science Journal

Undoped and Co-doped zinc oxide (CZO) thin films have been prepared by spray pyrolysis technique using solution of zinc acetate and cobalt chloride. The effect of Co dopants on structural and optical properties has been investigated. The films were found to exhibit maximum transmittance (~90%) and low absorbance. The structural properties of the deposited films were examined by x-ray diffraction (XRD). These films, deposited on glass substrates at (400? C), have a polycrystalline texture with a wurtzite hexagonal structure, and the grain size was decreased with increasing Co concentration, and no change was observed in lattice constants while the optical band gap decreased from (3.18-3.02) eV for direct allowed transition. Other parameters such as Texture Coefficient (Tc), dislocation density (?) and number of crystals (M) were also calculated .


2018 ◽  
Vol 4 (5) ◽  
pp. 542-545 ◽  
Author(s):  
R. Shabu ◽  
A. Moses Ezhil Raj

As major attention has been paid to transition metal oxide semiconductor suitable for solar cell, photo detector and gas sensor, present study embark on the structural, optical and electrical characterization of Ag doped CuO thin films prepared using chemical spray pyrolysis technique at the constant substrate temperature of 350 �C. For Ag doping, various concentrations of silver acetate (0.5-3.0 wt.%) was used in the sprayed precursor solution. Confirmed monoclinic lattice shows the tenorite phase formation of CuO in the pure and Ag doped films. The optical band gap of the films was in the range of 2.4 -3.4 eV. A minimum resistivity of 0.0017x103 ohmcm was achieved in the 0.5 wt.% Ag doped film, and its optical band gap was 2.74 eV.


2018 ◽  
Vol 17 (03) ◽  
pp. 1760037 ◽  
Author(s):  
A. Nancy Anna Anasthasiya ◽  
K. Gowtham ◽  
R. Shruthi ◽  
R. Pandeeswari ◽  
B. G. Jeyaprakash

The spray pyrolysis technique was employed to deposit V2O5 thin films on a glass substrate. By varying the precursor solution volume from 10[Formula: see text]mL to 50[Formula: see text]mL in steps of 10[Formula: see text]mL, films of various thicknesses were prepared. Orthorhombic polycrystalline V2O5 films were inferred from the XRD pattern irrespective of precursor solution volume. The micro-Raman studies suggested that annealed V2O5 thin film has good crystallinity. The effect of precursor solution volume on morphological and optical properties were analysed and reported.


2017 ◽  
Vol 16 (01) ◽  
pp. 1650024
Author(s):  
Bhavana Singh ◽  
S. B. Shrivastava ◽  
V. Ganesan

The work deals with the preparation of Zinc Oxide (ZnO) thin films on microscopic glass substrate by spray pyrolysis technique. The systematic study on the influence of Mn doping up to 15% has been performed. The structural studies revealed that pure and doped film has hexagonal structure. In order to reduce the internal strain due to Mn doping, the crystallite size decreases. The atomic force microscopy (AFM) measurement shows the decrease in grain size and roughness with doping. The resistivity curve shows a clear hump corresponding to smaller Mn doping ([Formula: see text]) around [Formula: see text]. This hump was found to reduce with the increase in Mn concentration and for [Formula: see text], beyond which it vanishes completely. This is attributed to critical behavior of resistivity and may be due to the scattering of carriers by magnetic spin fluctuation via exchange interaction. The optical measurement shows the shift in absorption edge of Mn doped ZnO films toward the longer wavelength side. This correlates the reduction in grain size as a function of Mn concentration. The optical bandgap goes down, whereas refractive index increases with dopant concentration.


Sign in / Sign up

Export Citation Format

Share Document