Microstructure of Nanocrystalline Nickel Deposit Pulse-Plated on Depleted Uranium Surface

2005 ◽  
Vol 23 ◽  
pp. 191-194 ◽  
Author(s):  
Qing Feng Wang ◽  
Peng Cheng Zhang ◽  
Xiao Hong Wang ◽  
Da Peng Ren ◽  
Ding Mu Lang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Pulse Plating ◽  
Depleted Uranium ◽  
Crystallographic Structure ◽  
Face Centered Cubic ◽  
Nanocrystalline Nickel ◽  
Nickel Deposit ◽  
Average Grain Size ◽  
Face Centered ◽  
Crystallographic Defects

Microstructure of nickel deposit ,which was prepared with pulse-plating technology on depleted uranium surface, has been studied by X-ray diffractometry（XRD）,Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). The results indicate that the crystallographic structure of the deposit is face centered cubic; the deposit has a highly preferred orientation of (200), the relative orientation density of (200) is 3.44; the average grain size is about 45.5nm. The deposit is fine and has multi-crystal nature as well as crystallographic defects as dislocation, stacking and twin. It’s feasible to prepare nanocrystalline nickel deposit on depleted uranium surface with pulse plating technology.

NOVEL AND COST-EFFECTIVE SYNTHESIS OF SILVER NANOCRYSTALS: A GREEN SYNTHESIS

NANO ◽  
2011 ◽  
Vol 06 (04) ◽  
pp. 295-300 ◽  
Author(s):  
NISHAT ARSHI ◽  
FAHEEM AHMED ◽  
M. S. ANWAR ◽  
SHALENDRA KUMAR ◽  
BON HEUN KOO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Secondary Phase ◽  
Cost Effective ◽  
Silver Foil ◽  
Face Centered Cubic ◽  
X Rays ◽  
Xrd Pattern ◽  
Average Grain Size ◽  
Vis Spectroscopy ◽  
Face Centered

This paper reports the study on the synthesis and characterization of silver nanocrystals by a two-step synthesis procedure. The first step is the solution-free hand grinding of silver foil and sugar at room temperature for few minutes. The second step is the thermal decomposition of silver/sugar composite to form silver nanocrystals. The as-synthesized silver nanocrystals were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), ultraviolet visible (UV/Vis) spectroscopy, atomic force microscopy (AFM) and transmission electron microscopy (TEM) studies. The XRD pattern showed a face-centered cubic structure (single phase) with high crystallinity. The lattice parameters calculated from XRD pattern were found to be a = 4.12 Å for silver nanocrystals with average grain size of ~ 19 nm. The energy dispersive analysis of X-rays (EDAX) of silver nanocrystals confirmed the presence of silver and no peak of any secondary phase was detected. FESEM and AFM studies showed that the crystals have cube-like morphology. TEM results showed that the size of silver nanocrystals was found to be ~ 22 nm. This novel synthesis route, not reported earlier, would be a promising candidate for a variety of future applications of silver nanocrystals.

Brittle fracture of nickel by dynamic indentation

1992 ◽  
Vol 7 (8) ◽  
pp. 1973-1975 ◽  
Author(s):  
J.W. Hoehn ◽  
T. Foecke ◽  
W.W. Gerberich
Keyword(s):  
Electron Microscopy ◽  
Brittle Fracture ◽  
Fracture Process ◽  
Low Energy ◽  
Face Centered Cubic ◽  
Dynamic Indentation ◽  
Transgranular Cleavage ◽  
Energy Process ◽  
Face Centered ◽  
Scanning Electron

Cracks of up to 40 μm which are either transgranular cleavage or very low energy “ductile” cracks have been introduced into large-grained fcc Ni. The mechanism for introducing this brittle fracture was dynamic indentation. Optical and scanning electron microscopy together with use of selected area channeling patterns were used to confirm that the fracture process is transgranular. The results qualitatively support the hypothesis that dynamic cracks originating in a brittle film can propagate relatively large distances into a ductile face-centered-cubic substrate by a rapid, low energy process.

scholarly journals The Examination of Calcium ion Implanted Alumina with Energy Filtered Transmission Electron Microscopy

1997 ◽  
Vol 3 (S2) ◽  
pp. 413-414
Author(s):  
E.M. Hunt ◽  
J.M. Hampikian ◽  
N.D. Evans
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Pure Aluminum ◽  
Lattice Parameter ◽  
Face Centered Cubic ◽  
Ion Channeling ◽  
Transmission Electron ◽  
Knoop Microhardness ◽  
Aluminum Nanocrystals ◽  
Face Centered

Ion implantation can be used to alter the optical response of insulators through the formation of embedded nano-sized particles. Single crystal alumina has been implanted at ambient temperature with 50 keV Ca+ to a fluence of 5 x 1016 ions/cm2. Ion channeling, Knoop microhardness measurements, and transmission electron microscopy (TEM) indicate that the alumina surface layer was amorphized by the implant. TEM also revealed nano-sized crystals ≈7 - 8 nm in diameter as seen in Figure 1. These nanocrystals are randomly oriented, and exhibit a face-centered cubic structure (FCC) with a lattice parameter of 0.409 nm ± 0.002 nm. The similarity between this crystallography and that of pure aluminum (which is FCC with a lattice parameter of 0.404 nm) suggests that they are metallic aluminum nanocrystals with a slightly dilated lattice parameter, possibly due to the incorporation of a small amount of calcium.Energy-filtered transmission electron microscopy (EFTEM) provides an avenue by which to confirm the metallic nature of the aluminum involved in the nanocrystals.

scholarly journals Green Synthesis and Characterization of Pullulan Mediated Silver Nanoparticles through Ultraviolet Irradiation

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2382 ◽  
Author(s):  
Muhammad Jamshed Khan ◽  
Suriya Kumari ◽  
Kamyar Shameli ◽  
Jinap Selamat ◽  
Awis Qurni Sazili
Keyword(s):  
Silver Nanoparticles ◽  
Uv Irradiation ◽  
Irradiation Time ◽  
Edible Films ◽  
Crystallographic Structure ◽  
Face Centered Cubic ◽  
Selected Area Electron Diffraction ◽  
Vis Spectroscopy ◽  
Face Centered ◽  
Average Lattice

Nanoparticles (NPs) are, frequently, being utilized in multi-dimensional enterprises. Silver nanoparticles (AgNPs) have attracted researchers in the last decade due to their exceptional efficacy at very low volume and stability at higher temperatures. Due to certain limitations of the chemical method of synthesis, AgNPs can be obtained by physical methods including sun rays, microwaves and ultraviolet (UV) radiation. In the current study, the synthesis of pullulan mediated silver nanoparticles (P-AgNPs) was achieved through ultraviolet (UV) irradiation, with a wavelength of 365 nm, for 96 h. P-AgNPs were formed after 24 h of UV-irradiation time and expressed spectra maxima as 415 nm, after 96 h, in UV-vis spectroscopy. The crystallographic structure was “face centered cubic (fcc)” as confirmed by powder X-ray diffraction (PXRD). Furthermore, high resolution transmission electron microscopy (HRTEM) proved that P-AgNPs were covered with a thin layer of pullulan, with a mean crystalline size of 6.02 ± 2.37. The average lattice fringe spacing of nanoparticles was confirmed as 0.235 nm with quasi-spherical characteristics, by selected area electron diffraction (SAED) analysis. These green synthesized P-AgNPs can be utilized efficiently, as an active food and meat preservative, when incorporated into the edible films.

Investigation of Heat Treated Electrodeposited CoNiFe on Microstructure and Hardness

2015 ◽  
Vol 1113 ◽  
pp. 56-61
Author(s):  
Nor Azrina Resali ◽  
Koay Mei Hyie ◽  
M.N. Berhan ◽  
C.M. Mardziah
Keyword(s):  
Heat Treatment ◽  
Heat Treatment Temperature ◽  
Treatment Temperature ◽  
Crystallographic Structure ◽  
Face Centered Cubic ◽  
Heat Treated ◽  
Hardness Property ◽  
Finishing Process ◽  
The Face ◽  
Face Centered

In this research, heat treatment is the final finishing process applied on nanocrystalline CoNiFe to improve microstructure for good hardness property. Nanocrystalline CoNiFe has been synthesized using the electrodeposition method. This study investigated the effect of heat treatment at 500°C, 600°C, 700°C and 800°C on electrodeposited nanocrystalline CoNiFe. The heat treatment process was performed in the tube furnace with flowing Argon gas. By changing the heat treatment temperature, physical properties such as phase and crystallographic structure, surface morphology, grain size and hardness of nanocrystalline CoNiFe was studied. The nanocrystalline CoNiFe phase revealed the Face Centered Cubic (FCC) and Body Centered Cubic (BCC) crystal structure. FESEM micrographs showed that the grain sizes of the coatings were in the range of 78.76 nm to 132 nm. Dendrite shape was found in the microstructure of nanocrystalline CoNiFe. The nanocrystalline CoNiFe prepared in heat treatment temperature of 700°C, achieved the highest hardness of 449 HVN. The surface roughness of nanocrystalline CoNiFe heated at 700°C was found to be smaller than other temperatures.

scholarly journals Green Synthesis and Catalytic Activity of Silver Nanoparticles Based on Piper chaba Stem Extracts

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1777 ◽  
Author(s):  
Md. Mahiuddin ◽  
Prianka Saha ◽  
Bungo Ochiai
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Ftir Spectroscopy ◽  
Visual Observation ◽  
Face Centered Cubic ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Face Centered ◽  
Average Size

A green synthesis of silver nanoparticles (AgNPs) was conducted using the stem extract of Piper chaba, which is a plant abundantly growing in South and Southeast Asia. The synthesis was carried out at different reaction conditions, i.e., reaction temperature, concentrations of the extract and silver nitrate, reaction time, and pH. The synthesized AgNPs were characterized by visual observation, ultraviolet–visible (UV-vis) spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), energy dispersive x-ray (EDX), and Fourier transform infrared (FTIR) spectroscopy. The characterization results revealed that AgNPs were uniformly dispersed and exhibited a moderate size distribution. They were mostly spherical crystals with face-centered cubic structures and an average size of 19 nm. The FTIR spectroscopy and DLS analysis indicated that the phytochemicals capping the surface of AgNPs stabilize the dispersion through anionic repulsion. The synthesized AgNPs effectively catalyzed the reduction of 4-nitrophenol (4-NP) and degradation of methylene blue (MB) in the presence of sodium borohydride.

Structural, morphological, and magnetic study of nanocrystalline cobalt-copper powders synthesized by the polyol process

1995 ◽  
Vol 10 (6) ◽  
pp. 1546-1554 ◽  
Author(s):  
G.M. Chow ◽  
L.K. Kurihara ◽  
K.M. Kemner ◽  
P.E. Schoen ◽  
W.T. Elam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Copper Powders ◽  
Face Centered ◽  
Increasing Temperature ◽  
X Ray Absorption

Nanocrystalline CoxCu100−x (4 ⋚ x ⋚ 49 at. %) powders were prepared by the reduction of metal acetates in a polyol. The structure of powders was characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), extended x-ray absorption fine structure (EXAFS) spectroscopy, solid-state nuclear magnetic resonance (NMR) spectroscopy, and vibrating sample magnetometry (VSM). As-synthesized powders were composites consisting of nanoscale crystallites of face-centered cubic (fcc) Cu and metastable face-centered cubic (fcc) Co. Complementary results of XRD, HRTEM, EXAFS, NMR, and VSM confirmed that there was no metastable alloying between Co and Cu. The NMR data also revealed that there was some hexagonal-closed-packed (hcp) Co in the samples. The powders were agglomerated, and consisted of aggregates of nanoscale crystallites of Co and Cu. Upon annealing, the powders with low Co contents showed an increase in both saturation magnetization and coercivity with increasing temperature. The results suggested that during preparation the nucleation of Cu occurred first, and the Cu crystallites served as nuclei for the formation of Co.

Formation of iodine-doped C60 whiskers by the use of liquid–liquid interfacial precipitation method

2002 ◽  
Vol 17 (9) ◽  
pp. 2205-2208 ◽  
Author(s):  
Kun'ichi Miyazawa ◽  
Koichi Hamamoto
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Precipitation Method ◽  
Face Centered Cubic ◽  
Transmission Electron ◽  
Tetragonal Crystal ◽  
Axis Parallel ◽  
Tetragonal Crystal System ◽  
Lattice Planes ◽  
Face Centered

Iodine-doped whiskers of C60 (I–C60 whiskers) with diameters ranging from submicrometers to micrometers and lengths longer than 100 μm were successfully obtained by the use of the liquid–liquid interfacial precipitation method. Transmission electron microscopy observations showed that the I–C60 whiskers were single crystalline and had a growth axis parallel to the close-packed direction of C60 molecules and expanded (002) lattice planes indicative of the intercalation of iodine and oxygen atoms between the (002) planes of a body-centered-tetragonal crystal system. The I–C60 whiskers showed nonlinear I-V curves. The electrical resistivity of the I–C60 whiskers was more than three orders of magnitude lower than that of pristine face-centered-cubic C60 crystals.

Face centered cubic indium nano-particles studied by UHV-transmission electron microscopy

2001 ◽  
Vol 476 (1-2) ◽  
pp. 107-114 ◽  
Author(s):  
Yoshifumi Oshima ◽  
Tomoko Nangou ◽  
Hiroyuki Hirayama ◽  
Kunio Takayanagi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nano Particles ◽  
Face Centered Cubic ◽  
Transmission Electron ◽  
Face Centered

scholarly journals Structures of Graphene/Cobalt Interfaces in Cobalt-Encapsulated Carbon Nanocapsules

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Daisuke Matsuura ◽  
Tokushi Kizuka
Keyword(s):  
Electron Microscopy ◽  
Interlayer Spacing ◽  
Face Centered Cubic ◽  
Atomic Configuration ◽  
Graphene Layers ◽  
Transmission Electron ◽  
Cubic Structure ◽  
Carbon Nanocapsules ◽  
Face Centered ◽  
Co Nanoparticles

Carbon nanocapsules (CNCs) encapsulating cobalt (Co) nanoparticles with a face-centered-cubic structure were synthesized by a gas-evaporation method and were observed by high-resolution transmission electron microscopy. The Co nanoparticles revealed polyhedral shapes; they were truncated by low-index facets. The surfaces of Co nanoparticles were surrounded by graphene layers. The atomic configuration and interlayer spacing at the graphene/cobalt interfaces were investigated.

Sign in / Sign up

Export Citation Format

Share Document