Kinematics of a 4-DOF Bipod Parallel Grinder

2006 ◽  
Vol 304-305 ◽  
pp. 431-435
Author(s):  
Ping Zou ◽  
J. Angeles
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Horizontal Plane ◽  
Degrees Of Freedom ◽  
Closed Form Solutions ◽  
Moving Platform ◽  
Forward And Inverse Kinematics

In this paper, a novel bipod parallel grinder with four controlled degrees of freedom is introduced. The moving platform of this 2-leg parallel grinder can always keep moving in horizontal plane by means of four-parallelogram mechanism (Π joints). The closed-form solutions of forward and inverse kinematics are derived.

Kinematics of a n–bay triangle–triangle variable geometry truss manipulator

Robotica ◽  
1992 ◽  
Vol 10 (3) ◽  
pp. 263-267
Author(s):  
L. Beiner
Keyword(s):  
Iterative Method ◽  
Closed Form ◽  
Inverse Kinematics ◽  
Variable Length ◽  
Variable Geometry ◽  
Closed Form Solutions ◽  
Numerical Example ◽  
Forward And Inverse Kinematics ◽  
Variable Geometry Truss Manipulator ◽  
Variable Geometry Truss

SUMMARYVariable geometry truss manipulators (VGTM) are static trusses where the lengths of some members can be varied, allowing one to control the position of the free end relative to the fixed one. This paper deals with a planar VGTM consisting of a n–bay triangle-triangle truss with one variable length link (i.e. one DOF) per bay. Closed-form solutions to the forward, inverse, and velocity kinematics of a 3-DOF version of this VGTM are presented, while the forward and inverse kinematics of an n–DOF (redundant) one are solved by a recursive and an iterative method, respectively. A numerical example is presented.

scholarly journals Existence Conditions and General Solutions of Closed-form Inverse Kinematics for Revolute Serial Robots

2019 ◽  
Vol 9 (20) ◽  
pp. 4365 ◽  
Author(s):  
Wang Shanda ◽  
Luo Xiao ◽  
Luo Qingsheng ◽  
Han Baoling
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Closed Form Solution ◽  
Form Solution ◽  
Algebraic Equations ◽  
Closed Form Solutions ◽  
Serial Robots ◽  
Existence Conditions ◽  
Low Degrees

This study proposes a method for judging the existence of closed-form inverse kinematics solutions based on the Denavit–Hartenberg (DH) model. In this method, serial robots with closed-form solutions are described using three types of sub-problems from the viewpoint of solving algebraic equations. If a serial robot can be described using these three types of sub-problems, i.e., if the inverse kinematics problems can be solved by several basic problems, then there is a closed-form solution. Based on the above method, we design a set of universal closed-form inverse kinematics solving algorithms. Since there is a definite formula solution for the three types of sub-problems, the joint angles can be rapidly determined. In addition, because the DH parameters can directly reflect the linkage of the robot, the judgment of the sub-problems is also quick and accurate. More importantly, the algorithm can be applied to serial robots with low degrees of freedom. This enables the algorithm to not only quickly and accurately solve inverse kinematics problems but also to exhibit high universality. This proposed theory improves the existence conditions for closed-form reverse solutions and further promotes the development of motion control techniques for serial robots.

Kinematics of Continuum Robots With Constant Curvature Bending and Extension Capabilities

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
Arnau Garriga-Casanovas ◽  
Ferdinando Rodriguez y Baena
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Rapid Development ◽  
Closed Form Expression ◽  
Great Promise ◽  
Continuum Robots ◽  
Cluttered Environments ◽  
Closed Form Solutions ◽  
Significant Attention

Continuum robots are becoming increasingly popular due to the capabilities they offer, especially when operating in cluttered environments, where their dexterity, maneuverability, and compliance represent a significant advantage. The subset of continuum robots that also belong to the soft robots category has seen rapid development in recent years, showing great promise. However, despite the significant attention received by these devices, various aspects of their kinematics remain unresolved, limiting their adoption and obscuring their potential. In this paper, the kinematics of continuum robots with the ability to bend and extend are studied, and analytical, closed-form solutions to both the direct and inverse kinematics are presented. The results obtained expose the redundancies of these devices, which are subsequently explored. The solution to the inverse kinematics derived here is shown to provide an analytical, closed-form expression describing the curve associated with these redundancies, which is also presented and analyzed. A condition on the reachable end-effector poses for robots with six actuation degrees-of-freedom (DOFs) is then distilled. The kinematics of robot layouts with over six actuation DOFs are subsequently considered. Finally, simulated results of the inverse kinematics are provided, verifying the study.

A Hybrid Self-Stressed Cable-Driven Mechanism

2008 ◽  
Author(s):  
Saeed Behzadipour
Keyword(s):  
Static Loading ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Tensile Force ◽  
Cable System ◽  
End Effector ◽  
Stiffness Analysis ◽  
Cable Length ◽  
Cable Drive ◽  
Forward And Inverse Kinematics

A new hybrid cable-driven manipulator is introduced. The manipulator is composed of a Cartesian mechanism to provide three translational degrees of freedom and a cable system to drive the mechanism. The end-effector is driven by three rotational motors through the cables. The cable drive system in this mechanism is self-stressed meaning that the pre-tension of the cables which keep them taut is provided internally. In other words, no redundant actuator or external force is required to maintain the tensile force in the cables. This simplifies the operation of the mechanism by reducing the number of actuators and also avoids their continuous static loading. It also eliminates the redundant work of the actuators which is usually present in cable-driven mechanisms. Forward and inverse kinematics problems are solved and shown to have explicit solutions. Static and stiffness analysis are also performed. The effects of the cable’s compliance on the stiffness of the mechanism is modeled and presented by a characteristic cable length. The characteristic cable length is calculated and analyzed in representative locations of the workspace.

A Model of the Human Spine: Forward and Inverse Kinematics

1992 ◽  
Author(s):  
Sunil Kumar Agrawal ◽  
Siyan Li ◽  
Glen Desmier
Keyword(s):  
Range Of Motion ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Kinematic Model ◽  
Joint Angles ◽  
Human Spine ◽  
Forward And Inverse Kinematics ◽  
Position And Orientation ◽  
Three Degrees Of Freedom ◽  
Adjacent Vertebra

Abstract The human spine is a sophisticated mechanism consisting of 24 vertebrae which are arranged in a series-chain between the pelvis and the skull. By careful articulation of these vertebrae, a human being achieves fine motion of the skull. The spine can be modeled as a series-chain with 24 rigid links, the vertebrae, where each vertebra has three degrees-of-freedom relative to an adjacent vertebra. From the studies in the literature, the vertebral geometry and the range of motion between adjacent vertebrae are well-known. The objectives of this paper are to present a kinematic model of the spine using the available data in the literature and an algorithm to compute the inter vertebral joint angles given the position and orientation of the skull. This algorithm is based on the observation that the backbone can be described analytically by a space curve which is used to find the joint solutions..

scholarly journals IKBT: Solving Symbolic Inverse Kinematics with Behavior Tree (Extended Abstract)

2020 ◽  
Author(s):  
Dianmu Zhang ◽  
Blake Hannaford
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Intelligent System ◽  
Logical Reasoning ◽  
Robot Arm ◽  
Kinematics Analysis ◽  
Closed Form Solutions ◽  
Behavior Tree ◽  
Behavior Trees ◽  
High Level

Inverse kinematics solves the problem of how to control robot arm joints to achieve desired end effector positions, which is critical to any robot arm design and implementations of control algorithms. It is a common misunderstanding that closed-form inverse kinematics analysis is solved. Popular software and algorithms, such as gradient descent or any multi-variant equations solving algorithm, claims solving inverse kinematics but only on the numerical level. While the numerical inverse kinematics solutions are relatively straightforward to obtain, these methods often fail, even when the inverse kinematics solutions exist. Therefore, closed-form inverse kinematics analysis is superior, but there is no generalized automated algorithm. Up till now, the high-level logical reasoning involved in solving closed-form inverse kinematics made it hard to automate, so it's handled by human experts. We developed IKBT, a knowledge-based intelligent system that can mimic human experts' behaviors in solving closed-from inverse kinematics using Behavior Tree. Knowledge and rules used by engineers when solving closed-from inverse kinematics are encoded as actions in Behavior Tree. The order of applying these rules is governed by higher level composite nodes, which resembles the logical reasoning process of engineers. It is also the first time that the dependency of joint variables, an important issue in inverse kinematics analysis, is automatically tracked in graph form. Besides generating closed-form solutions, IKBT also explains its solving strategies in human (engineers) interpretable form. This is a proof-of-concept of using Behavior Trees to solve high-cognitive problems.

Synthesis of Seven-Link Mechanisms

1973 ◽  
Vol 95 (2) ◽  
pp. 533-540 ◽  
Author(s):  
D. Kohli ◽  
A. H. Soni
Keyword(s):  
Closed Form ◽  
Nonlinear Equations ◽  
Degrees Of Freedom ◽  
The Other ◽  
Linear Superposition ◽  
Two Degrees Of Freedom ◽  
Closed Form Solutions ◽  
Highly Nonlinear ◽  
Principle Of Linear Superposition

The mechanisms derived from the seven-link chains with five links in their two loops and having two degrees of freedom are examined for six synthesis problems. Using displacement matrices, closed form synthesis equations are derived. It is shown that three synthesis problems may be solved using the principle of linear superposition, and closed form solutions may be obtained. The other three synthesis problems involve highly nonlinear equations and must be solved numerically.

Orientation Workspace Analysis of a Novel 3SPS+1PS Symmetrical Parallel Manipulator Based on Unit Quaternion

2011 ◽  
Vol 201-203 ◽  
pp. 1849-1853
Author(s):  
Jing Li Yu ◽  
Gang Cheng ◽  
Shuai Zhang ◽  
De Kun Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Unit Quaternion ◽  
Structure Characteristics ◽  
Workspace Analysis ◽  
Moving Platform ◽  
Position And Orientation ◽  
4 Degrees Of Freedom ◽  
Orientation Workspace

For a novel 3SPS+1PS parallel manipulator with 4 degrees of freedom including three rotations and one translation, the formulae for solving the inverse kinematics equations are derived based on quaternion method. Unit quaternion is used to represent the position and orientation of moving platform, and the singularities caused by Euler angles are avoided. Combining the topological structure characteristics of the parallel manipulator, it only has three rotations when its moving platform is at a given translation position. Based on the inverse position/pose equations and the all the constraints of the parallel manipulator, the discrete algorithm for the orientation workspaces of 3SPS+1PS parallel manipulator where the moving platform is at some different given translation positions are designed. The research builds the theoretical basis for optimizing the orientation workspace with given position.

Geometry and Position Analysis of a Novel Class of Hybrid Manipulators

1994 ◽  
Author(s):  
Change-de Zhang ◽  
Shin-Min Song
Keyword(s):  
Closed Form ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Parallel Mechanisms ◽  
Serial Manipulators ◽  
Closed Form Solutions ◽  
Position Analysis ◽  
Hybrid Manipulator ◽  
Load Carrying ◽  
Inverse Position Analysis

Abstract This paper presents a novel class of hybrid manipulators composed of two serially connected parallel mechanisms, each of which has three degrees of freedom. The lower and upper platforms respectively control the position and orientation of the end-effector. The advantages of this type of hybrid manipulator are larger workspace (as compared with parallel manipulators) and better rigidity and higher load-carrying capability (as compared with serial manipulators). The closed-form solutions of the forward and inverse position analyses are discussed. For forward position analysis, it is shown that the resultant equation for the positional mechanism is an 8-th order, a 6-th order, a 4-th order, or a 2-nd order polynomial, depending on the geometry and joint types of the passive subchain, while for the orientational mechanism, it is an 8-th order, or a 2-nd polynomial depending on the geometry. For inverse position analysis, it is demonstrated that the positional and orientational mechanisms both possess analytical closed-form solutions.

Adaptive neuro-fuzzy inference system–based path planning of 5-degrees-of-freedom spatial manipulator for medical applications

2018 ◽  
Vol 232 (7) ◽  
pp. 726-732 ◽  
Author(s):  
Jyotindra Narayan ◽  
Ekta Singla ◽  
Sanjeev Soni ◽  
Ashish Singla
Keyword(s):  
Path Planning ◽  
Closed Form ◽  
Fuzzy Inference System ◽  
Degrees Of Freedom ◽  
Fuzzy Inference ◽  
Inverse Kinematic ◽  
Inference System ◽  
Closed Form Solutions ◽  
Neuro Fuzzy ◽  
Patient Side

Over the last few decades, medical-assisted robots have been considered by many researchers, within the research domain of robotics. In this article, a 5-degrees-of-freedom spatial medical manipulator is analyzed for path planning, based on inverse kinematic solutions. Analytical methods have generally employed for finding the inverse kinematic solutions in earlier studies. However, this method is only appreciable in case of closed-form solutions. The unusual joint configurations of considered manipulator result in more complexity to attain the closed-form solutions, analytically. To overcome with shortcomings of analytical method, a non-traditional approach named adaptive neuro-fuzzy inference system is proposed under the class of artificial intelligent techniques. This article presents this neuro-fuzzy approach for desired path generation by 5-degrees-of-freedom manipulator. The estimation of percentage error between actual path and adaptive neuro-fuzzy inference system–generated path is done with respect to x, y, and z directions, respectively. Furthermore, the error between actual and predicted values regarding joint parameters is calculated for a certain arm matrix. The prototype of 5-degrees-of-freedom medical-assisted manipulator is developed at CSIR-CSIO Laboratory Chandigarh, which is also termed as patient-side manipulator to be utilized in robot-assisted surgery. Through the simulation runs, in this work, it is found that the results from adaptive neuro-fuzzy inference system approach are quite satisfactory and acceptable.

Sign in / Sign up

Export Citation Format

Share Document