Microporous Ceramics Made by Silicon Carbide Whiskers

2007 ◽  
Vol 336-338 ◽  
pp. 1904-1905
Author(s):  
Chang Hong Dai ◽  
Ru Zhao ◽  
Li Shui ◽  
Bao Bao Zhang
Keyword(s):  
Silicon Carbide ◽  
Flexural Strength ◽  
Pore Size ◽  
Sintering Temperature ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
Sintering Aids ◽  
Silicon Carbide Whiskers ◽  
Physical And Chemical ◽  
And Chemical Properties

A new method for preparing microporous ceramics by the silicon carbide whiskers was studied in this paper. The physical and chemical properties and the microstructure of the microporous ceramics were tested, while some influencing factors for the product, such as the amount of sintering aids and sintering temperature, were discussed. The results suggest that the apparent porosity of the microporous ceramics is 55.7-59.8% and the flexural strength is 127-176MPa. The pore distribution of the microporous ceramics is uniformity and the diameter of the pore ranges between 0.5μm and 7μm. The porosity and pore size of the microporous ceramic can be controlled by adjusting the sintering temperature and the amount of sintering aids.

Research of Mo Powder’s Densification during Sintering

2011 ◽  
Vol 399-401 ◽  
pp. 103-108
Author(s):  
Ren Zhi Liu ◽  
Kuai She Wang ◽  
Yuan Jun Sun
Keyword(s):  
Sintering Temperature ◽  
Chemical Elements ◽  
Chemical Properties ◽  
Cold Isostatic Pressing ◽  
Physical And Chemical Properties ◽  
Fracture Surface Morphology ◽  
Shrinkage Ratio ◽  
Physical And Chemical ◽  
Sintering Shrinkage ◽  
And Chemical Properties

Mo powder was pressed into rods by cold isostatic pressing and sintered by multi-function furnace. Physical and chemical properties of sintering samples at different temperature were tested such as chemical elements, density, area shrinkage ratio and fracture surface morphology. Through the investigation we can draw the conclusions as following: Mo powder softens at 1353K. The temperature of beginning metallization is 1833K. In the range of 1713K~1953K, impurity contents such as C and O drop down fast and density increases sharply. When sintering temperature rises from 1833K to 1953K, the grains of sintering rods are fine. When the sintering temperature surpasses 2073K, the grains grow up very fast. The sintering shrinkage ratio enlarges quickly.

Polysilanes as Possible Precursors to Silicon Carbide

1984 ◽  
Vol 32 ◽  
Author(s):  
R. A. Sinclair ◽  
Robert West
Keyword(s):  
Silicon Carbide ◽  
Chemical Properties ◽  
High Strength ◽  
Physical And Chemical Properties ◽  
Porous Structures ◽  
Fundamental Level ◽  
Performance Improvements ◽  
Polymer Pyrolysis ◽  
Physical And Chemical ◽  
And Chemical Properties

The continuing search for new types of high-strength materials, and for performance improvements in existing ceramics, has encouraged several nonconventional approaches to ceramics synthesis. Some of the advantages of polymeric routes have already been demonstrated and include new fabrication procedures leading to continuous fibers, coatings and infiltrated porous structures. At a more fundamental level, polymer pyrolysis can allow control over the microstructure of the final ceramic, with important consequences for both physical and chemical properties (1).

Statistical criteria of stellar population types

1966 ◽  
Vol 24 ◽  
pp. 101-110
Author(s):  
W. Iwanowska
Keyword(s):  
Stellar Population ◽  
Chemical Properties ◽  
Spectrophotometric Study ◽  
Physical And Chemical Properties ◽  
Population Type ◽  
The Galaxy ◽  
Distribution Parameters ◽  
Physical And Chemical ◽  
Statistical Criteria ◽  
And Chemical Properties

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

Sign in / Sign up

Export Citation Format

Share Document