Determining the Thickness and Refractive Index of a Birefringence by Using an Improved Accurate Measurement System

2007 ◽  
Vol 364-366 ◽  
pp. 510-515
Author(s):  
Yen Liang Yeh ◽  
Cheng Chi Wang ◽  
Ming Jyi Jang ◽  
Yen Pin Lin ◽  
Kuang Sheng Chen

This paper presents a high-precision, non-destructive measurement system for determining the thickness and refractive indices of birefringent optical wave plates. Significantly, the proposed method enables the two refractive indices of the optical sample to be measured simultaneously. The performance of the proposed system is verified using a commercial quartz optical wave plate with known refractive indices of 1.5518 e n = and 1.5427 o n = , respectively, and a thickness of 452.1428 μm. The experimentally determined values of the refractive indices are found to be 1.55190 e n = and 1.54281 o n = , respectively, while the thickness is found to be 452.189 μm, corresponding to an experimental error of approximately 0.046 μm. The measurement resolution of the proposed system exceeds that of the interferometer hardware itself and provides a simple yet highly accurate means of measuring the principal optical parameters of birefringent glass wave plates.

A method is suggested by which the refractive index and Verdet constant of an atomic system may be derived theoretically. It is applied to atomic hydrogen and to the inert gases and a comparison is made with experimental data. The Verdet constant of neon is not anomalous. The origin of the suggestion appears to be an underestimate of the experimental error. The analysis yields values of th e polarizabilities of th e inert gases which are respectively He, 1-384; Ne, 2-663; Ar, 11-080; K r, 16-734; X e, 27-292 in units of α 3 0


2014 ◽  
Vol 635-637 ◽  
pp. 694-697
Author(s):  
Xin Bian ◽  
Feng Huang ◽  
Guo Rong Cao ◽  
Zheng Ling Wang

A method for structure parameters of doublet objective lens with non-destructive measurement is proposed based on the ZEMAX software. The focal length, back focal length, central thickness and the radius of curvature of the first surface and last surface are measured by a spherical interferometer and other instruments. Using the inversion of the evaluation function and optimizing of the ZEMAX, the series of refractive index of the materials and the cemented surface of the doublet objective lens are derived. Then the optimal combination of the glass materials is selected by the aberration tolerances of the doublet objective lens. The examples show that the result is satisfactory.


2013 ◽  
Vol 333-335 ◽  
pp. 135-139
Author(s):  
Hai Ye ◽  
Ying Jun Gao

In order to measure the optical parameters of biological tissue accurately and non-invasive, the measurement system based on optical coherence tomography was analyzed and designed from two aspects of hardware and software. The refractive index was calibrated by standard refractive index solutions, experiments were preformed to obtain refractive index of tissue samples and scattering coefficient of IntralipidTMsolution with different concentrations. Results show that the experimental values of refractive index agree with the standard values roughly and scattering coefficient linear relate with concentration in IntralipidTMsolution. The measurement system designed in our experiment is accurate and reliable, simple and feasible.


2020 ◽  
Vol 9 (2) ◽  
pp. 209-217
Author(s):  
Markus Stoehr ◽  
Gerald Gerlach ◽  
Thomas Härtling ◽  
Stephan Schoenfelder

Abstract. Photoelasticity is considered a useful measurement tool for the non-destructive and contactless determination of mechanical stresses or strains in the production of silicon wafers. It describes a change in the indices of refraction of a material when the material is mechanically loaded. As silicon has a diamond lattice structure, the stress-dependent change in the refractive indices varies with the loading direction. In this work, an anisotropic stress-optic law is derived, and the corresponding stress-optical parameters are measured using a Brazilian disc test. The parameters were determined to be (π11-π12)=14.4⋅10-7 MPa−1 and π44=9.4⋅10-7 MPa−1. The results of this work are compared to previous works found in the literature, and the deviations are discussed.


2019 ◽  
Vol 19 (21) ◽  
pp. 13409-13443 ◽  
Author(s):  
Lei Li ◽  
Oleg Dubovik ◽  
Yevgeny Derimian ◽  
Gregory L. Schuster ◽  
Tatyana Lapyonok ◽  
...  

Abstract. This study presents a novel methodology for the remote monitoring of aerosol components over large spatial and temporal domains. The concept is realized within the GRASP (Generalized Retrieval of Aerosol and Surface Properties) algorithm to directly infer aerosol components from the measured radiances. The observed aerosols are assumed to be mixtures of hydrated soluble particles embedded with black carbon, brown carbon, iron oxide, and other (non-absorbing) insoluble inclusions. The complex refractive indices of the dry components are fixed a priori (although the refractive index of the soluble host is allowed to vary with hydration), and the complex refractive indices of the mixture are computed using mixing rules. The volume fractions of these components are derived along with the size distribution and the fraction of spherical particles, as well as the spectral surface reflectance in cases when the satellite data are inverted. The retrieval is implemented as a statistically optimized fit in a continuous space of solutions. This contrasts with most conventional approaches in which the type of aerosol is either associated with a pre-assumed aerosol model that is included in a set of look-up tables, or determined from the analysis of the retrieved aerosol optical parameters (e.g., single scattering albedo, refractive index, among others, provided by the AERONET retrieval algorithm); here, we retrieve the aerosol components explicitly. The approach also bridges directly to the quantities used in global chemical transport models. We first tested the approach with synthetic data to estimate the uncertainty, and then applied it to real ground-based AERONET and spaceborne POLDER/PARASOL observations; thus, the study presents a first attempt to derive aerosol components from satellite observations specifically tied to global chemical transport model quantities. Our results indicate aerosol optical characteristics that are highly consistent with standard products (e.g., R of ∼0.9 for aerosol optical thickness) and demonstrate an ability to separate intrinsic optical properties of fine- and coarse-sized aerosols. We applied our method to POLDER/PARASOL radiances on the global scale and obtained spatial and temporal patterns of the aerosol components that agree well with existing knowledge on aerosol sources and transport features. Finally, we discuss limitations and perspectives of this new technique.


2011 ◽  
Vol 421 ◽  
pp. 364-368
Author(s):  
Yong Gan ◽  
Ao Ran Sun ◽  
Jing Chen

It discusses the measurement principle and the system design of 3D non-destructive measurement method for the homogeneous entity. The measurement project and its operating process is discussed. The basic operation principle and components of this measurement device are pointed out. It included the digitized minute entity cells and the delaminated measuring method for product profiles based on liquid. It is based on Archimedes' principle and lever principle and gravity moment, combined the equations of the gravity moment and the equations of the center of gravity, the 3D coordinate values of every minute entity cell in different layers can be reckon by computer. By inputting the 3D coordinate values of the product into the related CAD software system, the 3D model could be obtained. The principles, the system software were introduced in details about the measurement system of the homogeneous entity profiles. Proved through principium experiment, the system satisfies the request of the measuring precision. The measurement system is effective and feasible.


2011 ◽  
Vol 201-203 ◽  
pp. 63-68 ◽  
Author(s):  
Yong Gan ◽  
Jing Ru Zhong ◽  
Du Fen Gan

A new non-destructive measurement system of the homogeneous entity profiles was designed; it included the digitized minute entity cells and the delaminated measuring method for product profiles based on liquid. It is based on Archimedes' principle and lever principle and gravity moment, used optic system to collect images and calculated the verge profiles, combined the equations of the gravity moment and the equations of the center of gravity to reckon the 3D coordinate values of every minute entity cell in different layers by computer. By inputting the 3D coordinate values of the product into the related CAD software system, the 3D model could be obtained. The principles, hardware and software of the system were introduced in details about the measurement system of the homogeneous entity profiles.


Sign in / Sign up

Export Citation Format

Share Document