Effects of Phosphorus and Fluorine on the Crystallization and Structure of CaO-A12O3-SiO2 System Glass-Ceramic

2008 ◽  
Vol 368-372 ◽  
pp. 1412-1414 ◽  
Author(s):  
Jin Shu Cheng ◽  
Hui Guang Qiu ◽  
Hong Li ◽  
Jun Xie
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Glass Ceramic ◽  
Glass Ceramics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Yellow Phosphorus ◽  
Crystallization Of Glass ◽  
Scanning Electron

CaO-A12O3-SiO2 (CAS) system glass-ceramics were prepared by sintering with certain amount of yellow phosphorus slag. The effects of phosphorus and fluorine on the nucleation, crystallization and structure of CAS system glass-ceramics were investigated by differential thermal analysis, X-ray diffraction, scanning electron microscopy and other measuring methods. Glass-ceramics of CAS system with 42.32wt% yellow phosphorus slag were obtained by nucleating at 615°C for 1 hour and crystallizing at 926°C for 2 hours. The results showed that the introduction of phosphorus and fluorine promoted the nucleation and crystallization of glass-ceramics, lowering the crystallizing temperature. The main crystal phase of glass-ceramics was β-wollastonite. The density of the glass-ceramic was 2.695g/cm3.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Influences of Fe2O3 Doping on the Crystallization of SiO2-Al2O3-MgO-K2O-ZrO2-F Glass-Ceramics

2009 ◽  
Vol 79-82 ◽  
pp. 1503-1506 ◽  
Author(s):  
Qing Bo Tian ◽  
Li Na Xu ◽  
Li Yang ◽  
Yan Sheng Yin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Elevated Temperatures ◽  
Glass Ceramics ◽  
X Ray Diffraction ◽  
Crystallization Peak ◽  
X Ray ◽  
Microstructural Morphology ◽  
Microscopy Techniques ◽  
Scanning Electron

The influences of Fe2O3 doping on crystallization characteristics and microstructural morphology in the SiO2-Al2O3-MgO-K2O-ZrO2-F glass were investigated by using differential scanning calorimeter, X-ray diffraction and scanning electron microscopy techniques. The results indicate that the addtions of Fe2O3 shift the crystallization peaks to higher temperatures and the crystallization peaks increases in magnitude and the gap values between two crystallization peak temperatures boarden with the increment of Fe2O3 contents.The star-shaped crystals of cordietite by dendritic-manner growths are homogeneously precipitated in the rusidual glass. The mica phases, which are precipitated at interdendritic cordietite phases and formed the plate shapes at the elevated temperatures. The mica crystals grow at the expense of cordietite phases and finally form the composites of mica/cordietite uniformly distributed.

Darstellung und Charakterisierung des Silber(I,II,III)-oxidclathrates Ag7O8HCO3 / Synthesis and Characterization of the Silver(I,II,III) Oxide Clathrate Ag7O8HCO3

2000 ◽  
Vol 55 (9) ◽  
pp. 882-886 ◽  
Author(s):  
Martin Jansen ◽  
Sascha Vensky
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Magnetic Susceptibility ◽  
Solid State Nmr ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

The silver(I,II,III) oxide clathrate Ag7O8HCO3 was synthesized by anodic oxidation of silver(I) in a suspension of Ag2CO3 in an aqueous AgF solution. The title compound was characterized by single crystal X-ray diffraction (cubic, Fm3̄m, a = 9.8085(3) Å, Z = 4), scanning electron microscopy, thermal analysis, IR spectroscopy, 1H-solid state-NMR and measurement of the magnetic susceptibility

Preparation and Properties of Sintering Brick from Iron Tailings

2012 ◽  
Vol 512-515 ◽  
pp. 1023-1027
Author(s):  
Ran Fang Zuo ◽  
Gao Xiang Du ◽  
Le Fu Mei ◽  
Wei Juan Guo ◽  
Jing Hui Liao
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Bulk Density ◽  
Raw Materials ◽  
Loss On Ignition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Freeze Thaw ◽  
Scanning Electron

The main objective of this paper was to investigate the addition of iron tailing sintering brick production, in the presence of clay, coal refuses and bentonite. Mixtures containing raw materials of sintering brick and iron tailings were prepared at different proportions (up to 55 wt %), fired at 980°C. Freeze/thaw durability, drying and firing shrinkages were investigated as well as the loss on ignition, bulk density and compressive strength of the fired samples. Their mechanical and microstructure properties were also investigated by differential thermal analysis (DTA/TG), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results showed that compressive strengths of the brick samples are higher than that required by the standards MU15 of GB5101-2003, up to 21.79Mpa with 40% iron tailings corresponding to its higher bulk density completely. Moreover, the results showed that it has such advantages as no lime blowing, uniform color, good freeze/thaw resistance and slight universal frost.

Crystal Structure of BiFeO3 Synthesized Using the Hydrothermal Processing

2014 ◽  
Vol 602-603 ◽  
pp. 947-950
Author(s):  
Zhen Wang ◽  
Hai Yan Chen ◽  
Lin Qiang Gao ◽  
Xin Zou
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Single Phase ◽  
Hydrothermal Processing ◽  
Optimal Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

BiFeO3 nanoparticles were successfully synthesized by a hydrothermal method by a mineralizer (KNO3). Structural characterization was performed by thermal analysis, powder X-ray diffraction (XRD) and scanning electron microscopy (TEM).The results showed that the products were perovskite structure BiFeO3 powders. Optimal conditions for the synthesis of single-phase BiFeO3 ceramics were obtained.

scholarly journals Manilkara zapota (Linn.) Seeds: A Potential Source of Natural Gum

2014 ◽  
Vol 2014 ◽  
pp. 1-10
Author(s):  
Sudarshan Singh ◽  
Sunil B. Bothara
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Gel Permeation Chromatography ◽  
X Ray Diffraction ◽  
X Ray ◽  
Manilkara Zapota ◽  
Gel Permeation ◽  
Scanning Electron

Mucilage isolated from seeds of Manilkara zapota (Linn.) P. Royen syn. is a plant growing naturally in the forests of India. This mucilage is yet to be commercially exploited, and characterized as polymer. Various physicochemical methods like particle size analysis, scanning electron microscopy, thermal analysis, gel permeation chromatography, X-ray diffraction spectrometry, zeta potential, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy have been employed to characterize this gum in the present study. Particle size analyses suggest that mucilage has particle size in nanometer. Scanning electron microscopy analysis suggests that the mucilage has irregular particle size. The glass transition temperature of the gum was observed to be 138°C and 136°C by differential scanning calorimetry and differential thermal analysis, respectively. The thermogravimetric analysis suggested that mucilage had good thermal stability. The average molecular weight of mucilage was determined to be 379180, by gel permeation chromatography, while the viscosity of mucilage was observed to be 219.1 cP. The X-ray diffraction spectrometry pattern of the mucilage indicates a completely amorphous structure. Elemental analysis of the gum revealed the contents of carbon, hydrogen, nitrogen, and sulfur to be 80.9 (%), 10.1 (%), 1.58 (%), and 512 (mg/kg), respectively. Mucilage had specific content of calcium, magnesium, potassium, lower concentrations of aluminum, cadmium, cobalt, lead, and nickel. The major functional groups identified from FT-IR spectrum include 3441 cm−1 (–OH), 1660 cm−1 (Alkenyl C–H & C=C Stretch), 1632 cm−1 (–COO–), 1414 cm−1 (–COO–), and 1219 cm−1 (–CH3CO). Analysis of mucilage by paper chromatography and 1D NMR, indicated the presence of rhamnose, xylose, arabinose, mannose, and fructose.

Sign in / Sign up

Export Citation Format

Share Document