Bone Regeneration at Cortical Bone Defect with Unidirectional Porous Hydroxyapatite In Vivo

2008 ◽  
Vol 396-398 ◽  
pp. 11-14 ◽  
Author(s):  
Masashi Iwasashi ◽  
Masataka Sakane ◽  
Yasushi Suetsugu ◽  
Naoyuki Ochiai
Keyword(s):  
Bone Formation ◽  
Cortical Bone ◽  
Bone Defect ◽  
Proximal Tibia ◽  
New Bone Formation ◽  
Porous Hydroxyapatite ◽  
Japanese White Rabbit ◽  
Great Possibility ◽  
Porous Area

Unidirectional porous hydroxyapatite (UDPHAp) was developed which has microstructure in that cross sectionally oval pores 100 ~ 300µm in diameter penetrate through the material, and that is suitable for osteogenesis and angiogenesis.The porosity of the UDPHAp was 75 % and the compression strength was 14 MPa. A cortical bone defect was made at proximal tibia of Japanese white rabbit, and a trapezoidal prisms shaped UDPHAp was implanted. By histlogical evaluation, 2 weeks after implantation, new bone and new capillary was observed inside UDPHAp. Twelve weeks after implantation, new bone formation was observed in 41.6 % of the porous area. The results of this study suggest a great possibility of utilizing it in actual clinical setting as a bone substitution.

Structural and Tissue Reaction Properties of Novel Hydroxyapatite Ceramics with Unidirectional Pores

2007 ◽  
Vol 330-332 ◽  
pp. 1003-1006 ◽  
Author(s):  
Yasushi Suetsugu ◽  
Yuji Hotta ◽  
Masashi Iwasashi ◽  
Masataka Sakane ◽  
Masanori Kikuchi ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Crystal Growth ◽  
Bone Formation ◽  
Porous Ceramics ◽  
Tissue Reaction ◽  
New Bone Formation ◽  
Hydroxyapatite Nanoparticles ◽  
Porous Hydroxyapatite ◽  
Hydroxyapatite Ceramics

Porous ceramics of hydroxyapatite was fabricated utilizing the crystal growth of thin ice columns parallel to one another in gelatin gel containing hydroxyapatite nanoparticles. The obtained ceramics possessed unidirectional pore channels with a porosity of around 75% and showed compressive strength of up to 13.1 MPa. As control materials, porous hydroxyapatite ceramics with a directionless pore structure were also fabricated by isotropic freezing and compared with the unidirectional samples regarding compressive strength and tissue reaction in vivo. Although the porosity and pore size distribution were similar, the compressive strength and new bone formation ability of the unidirectional samples were significantly greater than those of the random structured porous ceramics.

scholarly journals In Vivo Study for Clinical Application of Dental Stem Cell Therapy Incorporated with Dental Titanium Implants

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 381
Author(s):  
Hyunmin Choi ◽  
Kyu-Hyung Park ◽  
Narae Jung ◽  
June-Sung Shim ◽  
Hong-Seok Moon ◽  
...  
Keyword(s):  
Stem Cells ◽  
Bone Formation ◽  
Alveolar Bone ◽  
Human Mesenchymal Stem Cells ◽  
Titanium Implants ◽  
Osteogenic Potential ◽  
Induction Medium ◽  
Radiographic Analysis ◽  
New Bone Formation

The aim of this study was to investigate the behavior of dental-derived human mesenchymal stem cells (d-hMSCs) in response to differently surface-treated implants and to evaluate the effect of d-hMSCs on local osteogenesis around an implant in vivo. d-hMSCs derived from alveolar bone were established and cultured on machined, sandblasted and acid-etched (SLA)-treated titanium discs with and without osteogenic induction medium. Their morphological and osteogenic potential was assessed by scanning electron microscopy (SEM) and real-time polymerase chain reaction (RT-PCR) via mixing of 5 × 106 of d-hMSCs with 1 mL of Metrigel and 20 μL of gel-cell mixture, which was dispensed into the defect followed by the placement of customized mini-implants (machined, SLA-treated implants) in New Zealand white rabbits. Following healing periods of 2 weeks and 12 weeks, the obtained samples in each group were analyzed radiographically, histomorphometrically and immunohistochemically. The quantitative change in osteogenic differentiation of d-hMSCs was identified according to the type of surface treatment. Radiographic analysis revealed that an increase in new bone formation was statistically significant in the d-hMSCs group. Histomorphometric analysis was in accordance with radiographic analysis, showing the significantly increased new bone formation in the d-hMSCs group regardless of time of sacrifice. Human nuclei A was identified near the area where d-hMSCs were implanted but the level of expression was found to be decreased as time passed. Within the limitations of the present study, in this animal model, the transplantation of d-hMSCs enhanced the new bone formation around an implant and the survival and function of the stem cells was experimentally proven up to 12 weeks post-sacrifice.

In Vivo and In Vitro Evaluation of Coated HAp Films with Different Surface Morphology

2007 ◽  
Vol 539-543 ◽  
pp. 710-715
Author(s):  
Kotaro Kuroda ◽  
Ryoichi Ichino ◽  
Masazumi Okido
Keyword(s):  
Bone Formation ◽  
Surface Morphology ◽  
New Bone Formation ◽  
Contact Ratio ◽  
Bone Implant ◽  
Ft Ir ◽  
Mouse Osteoblast ◽  
Surface Morphologies

Hydroxyapatite (HAp) coatings were formed on cp titanium plates and rods by the thermal substrate method in an aqueous solution that included 0.3 mM Ca(H2PO4)2 and 0.7 mM CaCl2. The coating experiments were conducted at 40-140 oC and pH = 8 for 15 or 30 min. The properties for the coated samples were studied using XRD, EDX, FT-IR, and SEM. All the specimens were covered with HAp, which had different surface morphologies such as net-like, plate-like and needle-like. After cleaning and sterilization, all the coated specimens were subjected to in vivo and vitro testing. In the in vitro testing, the mouse osteoblast-like cells (MC3T3-E1) were cultured on the coated and non-coated specimens for up to 30 days. Moreover, the specimens (φ2 x 5 mm) were implanted in rats femoral for up to 8 weeks, the osseoinductivity on them were evaluated. In in vitro evaluations, there were not significant differences between the different surface morphologies. In in vivo evaluations, however, two weeks postimplantation, new bone formed on both the HAp coated and non-coated titanium rods in the cancellous and cortical bone. The bone-implant contact ratio, which was used for the evaluation of new bone formation, was significantly dependent on the surface morphology of the HAp, and the results demonstrated that the needle-like coating appears to promote rapid bone formation.

scholarly journals Physical and Histological Comparison of Hydroxyapatite, Carbonate Apatite, and β-Tricalcium Phosphate Bone Substitutes

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1993 ◽  
Author(s):  
Kunio Ishikawa ◽  
Youji Miyamoto ◽  
Akira Tsuchiya ◽  
Koichiro Hayashi ◽  
Kanji Tsuru ◽  
...  
Keyword(s):  
Bone Formation ◽  
Bone Defect ◽  
Tricalcium Phosphate ◽  
Bone Substitutes ◽  
Physiological Solution ◽  
Tissue Response ◽  
Histological Evaluation ◽  
Carbonate Apatite ◽  
Artificial Bone ◽  
New Bone Formation

Three commercially available artificial bone substitutes with different compositions, hydroxyapatite (HAp; Neobone®), carbonate apatite (CO3Ap; Cytrans®), and β-tricalcium phosphate (β-TCP; Cerasorb®), were compared with respect to their physical properties and tissue response to bone, using hybrid dogs. Both Neobone® (HAp) and Cerasorb® (β-TCP) were porous, whereas Cytrans® (CO3Ap) was dense. Crystallite size and specific surface area (SSA) of Neobone® (HAp), Cytrans® (CO3Ap), and Cerasorb® (β-TCP) were 75.4 ± 0.9 nm, 30.8 ± 0.8 nm, and 78.5 ± 7.5 nm, and 0.06 m2/g, 18.2 m2/g, and 1.0 m2/g, respectively. These values are consistent with the fact that both Neobone® (HAp) and Cerasorb® (β-TCP) are sintered ceramics, whereas Cytrans® (CO3Ap) is fabricated in aqueous solution. Dissolution in pH 5.3 solution mimicking Howship’s lacunae was fastest in CO3Ap (Cytrans®), whereas dissolution in pH 7.3 physiological solution was fastest in β-TCP (Cerasorb®). These results indicated that CO3Ap is stable under physiological conditions and is resorbed at Howship’s lacunae. Histological evaluation using hybrid dog mandible bone defect model revealed that new bone was formed from existing bone to the center of the bone defect when reconstructed with CO3Ap (Cytrans®) at week 4. The amount of bone increased at week 12, and resorption of the CO3Ap (Cytrans®) was confirmed. β-TCP (Cerasorb®) showed limited bone formation at week 4. However, a larger amount of bone was observed at week 12. Among these three bone substitutes, CO3Ap (Cytrans®) demonstrated the highest level of new bone formation. These results indicate the possibility that bone substitutes with compositions similar to that of bone may have properties similar to those of bone.

scholarly journals BMSCs Seeding in Different Scaffold Incorporation with Hyperbaric Oxygen Treat Seawater Immersed Bony Defect

2021 ◽  
Author(s):  
gan zhang ◽  
Xiaosong Chen ◽  
Xunsheng Cheng ◽  
Xiuwu Ma ◽  
Congcong Chen
Keyword(s):  
Bone Formation ◽  
Bone Defect ◽  
Medullary Canal ◽  
Bony Defect ◽  
New Bone Formation ◽  
X Ray ◽  
New Zealand White Rabbits ◽  
Group A ◽  
Group B ◽  
Group D

Abstract Introduction: The experiment was undertaken to estimate the effect of BMSCs seeding in different scaffold incorporation with HBO on the repair of seawater immersed bone defect. And future compared n-HA/PLGA with β-TCP/PLGA as scaffold in treatment effect of seawater immersed bone defect.Methods: 60 New Zealand White rabbits with standard seawater defect in radius were randomly divided to group A (implant with nothing), group B (implanted with atuogenous bone), group C (implanted with n-HA/PLGA/BMSCs, and Group D ( implanted with β-TCP/PLGA/BMSCs). After implant, each rabbit receive HBO treatment at 2.4 ATA 100% oxygen for 120 minutes per day for 2 weeeks. Radiograph, histological and biomechanical examination were used to analyze osteogenesis.Result: X-ray analysis show that n-HA/PLGA/BMSCs and β-TCP/PLGA/BMSCs could accelerate the new bone formation, and the new bone formation in group C was lager than in group D or group A, and close to group B (P<0.05). After 12 weeks, in group A, defect without scaffold show a loose connect tissue filled in the areas. The medullary canal in group B was recanalizated. Defect in group C and D show a larger number of wove bone formation. The new wove bone formation in defect areas in group C was lager than D. The mechanical examination revealed ultimate strength at 12 weeks were group D>group C>group B>group A(P<0.05).Conclusion: Scaffold of n-HA/PLGA and β-TCP/PLGA incorporation with HBO and BMSCs were effective to treat seawater immersed bone defect, and n-HA/PLGA was more excellent than β-TCP/PLGA.

Quantitative Analysis of New Bone Formation in Various Bone Grafts by In - Vivo Tetracycline Labeling

1985 ◽  
Vol 20 (1) ◽  
pp. 1
Author(s):  
Sang Cheol Seong ◽  
Young Min Kim ◽  
Han Koo Lee ◽  
In Ho Choi ◽  
Moon Sang Chung ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Bone Formation ◽  
Bone Grafts ◽  
New Bone Formation ◽  
Tetracycline Labeling

scholarly journals Effects of condensation and compressive strain on implant primary stability

2020 ◽  
Vol 9 (2) ◽  
pp. 60-70 ◽  
Author(s):  
Zhijun Li ◽  
Masaki Arioka ◽  
Yindong Liu ◽  
Maziar Aghvami ◽  
Serdar Tulu ◽  
...  
Keyword(s):  
Bone Density ◽  
Bone Formation ◽  
Compressive Strain ◽  
Primary Stability ◽  
New Bone Formation ◽  
Implant Stability ◽  
Bone Microdamage ◽  
A Site ◽  
Femoral Implants

Aims Surgeons and most engineers believe that bone compaction improves implant primary stability without causing undue damage to the bone itself. In this study, we developed a murine distal femoral implant model and tested this dogma. Methods Each mouse received two femoral implants, one placed into a site prepared by drilling and the other into the contralateral site prepared by drilling followed by stepwise condensation. Results Condensation significantly increased peri-implant bone density but it also produced higher strains at the interface between the bone and implant, which led to significantly more bone microdamage. Despite increased peri-implant bone density, condensation did not improve implant primary stability as measured by an in vivo lateral stability test. Ultimately, the condensed bone underwent resorption, which delayed the onset of new bone formation around the implant. Conclusion Collectively, these multiscale analyses demonstrate that condensation does not positively contribute to implant stability or to new peri-implant bone formation. Cite this article: Bone Joint Res. 2020;9(2):60–70.

scholarly journals Cortical bone adaptation to a moderate level of mechanical loading in male Sost deficient mice

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Haisheng Yang ◽  
Alexander Büttner ◽  
Laia Albiol ◽  
Catherine Julien ◽  
Tobias Thiele ◽  
...  
Keyword(s):  
Physical Activity ◽  
Bone Formation ◽  
Bone Mass ◽  
Cortical Bone ◽  
Bone Adaptation ◽  
Moderate Level ◽  
Skeletal Maturation ◽  
Male Mice ◽  
Males And Females

AbstractLoss-of-function mutations in the Sost gene lead to high bone mass phenotypes. Pharmacological inhibition of Sost/sclerostin provides a new drug strategy for treating osteoporosis. Questions remain as to how physical activity may affect bone mass under sclerostin inhibition and if that effect differs between males and females. We previously observed in female Sost knockout (KO) mice an enhanced cortical bone formation response to a moderate level of applied loading (900 με at the tibial midshaft). The purpose of the present study was to examine cortical bone adaptation to the same strain level applied to male Sost KO mice. Strain-matched in vivo compressive loading was applied to the tibiae of 10-, 26- and 52-week-old male Sost KO and littermate control (LC) mice. The effect of tibial loading on bone (re)modeling was measured by microCT, 3D time-lapse in vivo morphometry, 2D histomorphometry and gene expression analyses. As expected, Sost deficiency led to high cortical bone mass in 10- and 26-week-old male mice as a result of increased bone formation. However, the enhanced bone formation associated with Sost deficiency did not appear to diminish with skeletal maturation. An increase in bone resorption was observed with skeletal maturation in male LC and Sost KO mice. Two weeks of in vivo loading (900 με at the tibial midshaft) induced only a mild anabolic response in 10- and 26-week-old male mice, independent of Sost deficiency. A decrease in the Wnt inhibitor Dkk1 expression was observed 3 h after loading in 52-week-old Sost KO and LC mice, and an increase in Lef1 expression was observed 8 h after loading in 10-week-old Sost KO mice. The current results suggest that long-term inhibition of sclerostin in male mice does not influence the adaptive response of cortical bone to moderate levels of loading. In contrast with our previous strain-matched study in females showing enhanced bone responses with Sost ablation, these results in males indicate that the influence of Sost deficiency on the cortical bone formation response to a moderate level of loading differs between males and females. Clinical studies examining antibodies to inhibit sclerostin may need to consider that the efficacy of additional physical activity regimens may be sex dependent.

Overexpression of Fam20C in osteoblast in vivo leads to increased cortical bone formation and osteoclastic bone resorption

Bone ◽  
2020 ◽  
Vol 138 ◽  
pp. 115414
Author(s):  
Katsutoshi Hirose ◽  
Takuya Ishimoto ◽  
Yu Usami ◽  
Sunao Sato ◽  
Kaori Oya ◽  
...  
Keyword(s):  
Bone Resorption ◽  
Bone Formation ◽  
Cortical Bone ◽  
Osteoclastic Bone Resorption

In Vitro and In Vivo Evaluation Of Calcium Phosphate Bone Graft Substitutes

2010 ◽  
Vol 654-656 ◽  
pp. 2065-2070
Author(s):  
Ho Yeon Song ◽  
Young Hee Kim ◽  
Jyoti M. Anirban ◽  
In Seon Byun ◽  
Kyung A Kwak ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Bone Formation ◽  
Bone Graft ◽  
Cellular Proliferation ◽  
New Bone Formation ◽  
Hydroxy Apatite ◽  
Defect Sites ◽  
Bone Graft Substitutes

Calcium phosphate ceramics such as hydroxy apatite (HA), β-tricalcium phosphate (β-TCP) and bicalcium phosphate (BCP) have been used as a bone graft biomaterial because of their good biocompatibility and similarity of chemical composition to natural bones. To increase the mechanical and osteoconductive properties, the granules and spongy type porous bone graft substitutes were prepared by fibrous monolithic process and polyurethane foam replica methods, respectively. The pore sizes obtained using these approaches ranged between 100-600 µm. The cytotoxicity, cellular proliferation, differentiation and ECM deposition on the bone graft substitutes were observed by SEM and confocal microscopy. Moreover, the scaffolds were implanted in the rabbit femur. New bone formation and biodegradation of bone graft were observed through follow-up X-ray, micro-CT analysis and histological findings. After several months (2, 3, 6, 12 and 24 months) of implantation, new bone formation and ingrowths were observed in defect sites of the animal by CaP ceramics and 2 to 3 times higher bone ingrowths were confirmed than that of the normal trabecular bones in terms of total bone volume (BV).

Sign in / Sign up

Export Citation Format

Share Document