HSM Strategies of CAD/CAM Systems — Part II Industrial Application

2010 ◽  
Vol 426-427 ◽  
pp. 559-563 ◽  
Author(s):  
Song Lin Ding ◽  
John Mo ◽  
D. Yang
Keyword(s):  
Industrial Application ◽  
High Speed ◽  
Tool Path ◽  
State Of The Art ◽  
High Speed Machining ◽  
Advantages And Disadvantages ◽  
Software Packages ◽  
Cad Cam ◽  
Increasing Demand ◽  
Cam Systems

Over one hundred types of commercial CAD/CAM systems are currently used in various industries. To meet the increasing demand for high speed machining (HSM) from shop floors most of these systems have integrated functions for the generation of HSM tool path. However, the strategies they adopted and the qualities of HSM tool path generated by these packages differ significantly from system to system. This paper reviews the state-of-the-art HSM strategies adopted by industrial CAD/CAM systems. The review is based on sixteen widely used software packages which include both advanced systems and the relatively concise packages. HSM features of each system are summarized; HSM strategies adopted by those systems are presented; the advantages and disadvantages are discussed as well.

Collision-Free Tool Path Generation for Five-Axis High Speed Machining

2011 ◽  
Vol 474-476 ◽  
pp. 961-966 ◽  
Author(s):  
Li Qiang Zhang ◽  
Min Yue
Keyword(s):  
Image Analysis ◽  
Collision Detection ◽  
High Speed ◽  
Tool Path ◽  
Geometric Model ◽  
High Speed Machining ◽  
Analysis Method ◽  
Geometric Information ◽  
Detection Approach ◽  
Five Axis

Collision detection is a critical problem in five-axis high speed machining. Using a combination of process simulation and collision detection based on image analysis, a rapid detection approach is developed. The geometric model provides the cut geometry for the collision detection and records a dynamic geometric information for in-process workpiece. For the precise collision detection, a strategy of image analysis method is developed in order to make the approach efficient and maintian a high detection precision. An example of five-axis machining propeller is studied to demonstrate the proposed approach. It has shown that the collision detection task can be achieved with a near real-time performance.

Tool Path Generation Method of Equal Approximation Error for Free-Form Surface in High Speed Machining

2010 ◽  
Vol 102-104 ◽  
pp. 544-549 ◽  
Author(s):  
Chun Jiang Zhou ◽  
Hong Chun Chen
Keyword(s):  
High Speed ◽  
Tool Path ◽  
Cutting Tool ◽  
End Milling ◽  
Approximation Error ◽  
Tool Path Generation ◽  
Free Form ◽  
Path Generation ◽  
High Speed Machining ◽  
Free Form Surface

The development of surface high-speed machining has put forward higher demands for uniform cutting load and smooth cutting tool path. Most current tool-path planning methods are based on constant scallop height, but they have the disadvantage of path point redundancy during the path discretization process. To overcome the problem, a tool path generation method of equal approximation error in each step for free-form surface is presented based on geodesic principle and curvature judgment. In this method, the NURBS curve is employed to realize smooth transition for adjacent two tool paths in high-speed machining. A certain angle of inclination of flat-end milling cutter during multi-axis machining improves the machining efficiency. Because of the advantage of this machining condition, the cutter location point generation algorithm during the machining condition is given by the method. The method is verified and simulated by C++. Experiment results proved that it can obtain uniform cutting load and continuous smooth cutting tool path during surface high-speed machining by the proposed method.

Development of Real-Time Look-Ahead Methodology Based on Quintic PH Curve with G2 Continuity for High-Speed Machining

2013 ◽  
Vol 464 ◽  
pp. 258-264 ◽  
Author(s):  
Jing Shi ◽  
Qing Zhen Bi ◽  
Yu Han Wang ◽  
Gang Liu
Keyword(s):  
Real Time ◽  
High Speed ◽  
Tool Path ◽  
Approximation Error ◽  
Machining Process ◽  
Transition Curve ◽  
Look Ahead ◽  
Cad Cam ◽  
Feedrate Fluctuation ◽  
Ph Curve

Curving tool paths composed of straight lines, which are often represented as G01 blocks, are still the most widespread format form in the machining process chain of CAD/CAM/CNC. At the junctions between consecutive segments, the tangency and curvature discontinuities may lead to feedrate fluctuation and acceleration oscillation, which would deteriorate the machining efficiency and quality. In this paper, a real-time look-ahead interpolation methodology is proposed, which adopts a curvature-continuous PH curve as a transition to blend corner at the junction of adjacent lines in the tool path. The blending algorithm can guarantee the approximation error exactly, and the control points of the curve can be calculated analytically. On the other hand, the arc length and the curvature of the transition curve, which are important items in speed planning, also have analytical expressions. All the advantages are the guarantee of calculation efficiency during the interpolation. Except for a curvature-continuous tool path, our look-ahead algorithm adopts a speed planning window strategy to achieve a balance between the calculation capabilities and the real-time interpolation requirements. In this window, the corner transition algorithm and speed planning are implemented simultaneously and dynamically during the interpolation. By defining the width of this window, which is actually the number of linear segments contained in this window, can adjust the time consuming of speed planning. Simulation and experiments on our own developed CNC platform are conducted. The results demonstrate the feasibility and efficiency of the proposed algorithms.

A New One-Side Finish Machining Method for Profile of Globoidal Indexing Cam in High Speed

2009 ◽  
Vol 626-627 ◽  
pp. 611-616
Author(s):  
X.F. Tang ◽  
Wei He ◽  
Y.S. Liu
Keyword(s):  
High Speed ◽  
Tool Path ◽  
New Method ◽  
Practical Calculation ◽  
Machined Surface ◽  
Finish Machining ◽  
Cam Mechanism ◽  
Cad Cam ◽  
Meshing Characteristics ◽  
Path Modification

A new one-side finish machining method for the profile of globoidal indexing cam in high speed, which modifies the tool path of traditional enveloping method, was put forward. The new method is useful for overcoming the defects caused by traditional enveloping method, can realize one-side machining of globoidal indexing cam, can improve the machined surface quality and the meshing characteristics of the cam mechanism. The practical calculation formulas of tool path modification is given, which can be used in developing the CAD/CAM software of the globoidal indexing cam. The new method has great practical value.

HSM Strategies of CAD/CAM Systems — Part I Tool Path Generation

2010 ◽  
Vol 426-427 ◽  
pp. 520-524 ◽  
Author(s):  
Song Lin Ding ◽  
John Mo ◽  
D. Yang
Keyword(s):  
High Speed ◽  
Metal Cutting ◽  
Tool Path ◽  
Tool Path Generation ◽  
Path Generation ◽  
Cnc Machine ◽  
Technical Requirements ◽  
Cad Cam ◽  
High Feed ◽  
Cutting Processes

Owning to the ultra high feed rate and spindle speed, tool path patterns which are less important in conventional metal cutting processes becomes critical in High Speed Machining (HSM). Without an appropriate tool path strategy HSM can not be fully implemented even though the CNC machine has HSM potentials. In practice attentions are usually drawn to advanced hardware components; tool path pattern catering to HSM is often overlooked. This paper introduces the principles of tool path generation for HSM. Essential properties of HSM and its technical requirements on the CAD/CAM system are summarized. The state-of-the-art technologies and practice-oriented tool path generation methodologies are presented.

A smooth spiral tool path for high speed machining of 2D pockets

2009 ◽  
Vol 41 (7) ◽  
pp. 539-550 ◽  
Author(s):  
Martin Held ◽  
Christian Spielberger
Keyword(s):  
High Speed ◽  
Tool Path ◽  
High Speed Machining ◽  
Spiral Tool Path

CAD/CAM Strategies for a Parallel Kinematics SPIF Machine

2013 ◽  
Vol 554-557 ◽  
pp. 2221-2229 ◽  
Author(s):  
João B.S. Farias ◽  
Miguel A.B.E. Martins ◽  
Daniel G. Afonso ◽  
Sonia R.H. Marabuto ◽  
Jorge A. Ferreira ◽  
...  
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Parallel Kinematics ◽  
Forming Process ◽  
Advantages And Disadvantages ◽  
Cad Cam ◽  
Five Axis

Single point incremental forming has attracted the interest of researchers in the last decade for the production of prototypes and small batch production of sheet-based parts [1, 2]. This technique allows the manufacture of parts without using expensive die sets. The SPIF (Single point incremental forming) process can be performed on different equipments such as adapted CNC milling machines, serial robots and built proposed machines [3]. Every solution has advantages and disadvantages. This work presents the CAD/CAM strategies for a parallel kinematics SPIF machine, designed and built at the University of Aveiro [3]. This machine brings a new approach to the SPIF industry. The machinery used to perform SPIF operations has limitations in their work volume with limited movements and in the magnitude of applicable forces. With that in mind, this machine was projected to overcome that obstacle, and was provided with a system with 6 degrees of freedom, while maintaining the ability to apply high loads. The disadvantage is the increase in volume occupied by the kinematic system. The manufacture of new parts could be reached out with more flexibility on the chosen tool path. The first step is the product design in the commercial CAD system. Next step is generating the tool path of the forming tool. This step is very important to achieve the desired part shape. It is used a commercial CAM system (EdgeCAM 2012®), which has resources from three up to five axis strategies. The last step is to send the information to the machine’s control system, based on real-time software. This paper will describe each step with more details.

The Process Strategies of Mould High-Speed Machining and their Applications in the Environment of PowerMILL

2011 ◽  
Vol 188 ◽  
pp. 542-548 ◽  
Author(s):  
Jie Liu
Keyword(s):  
High Speed ◽  
Tool Path ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Feed Speed ◽  
Machining Parameters ◽  
High Speed Machining ◽  
Whole Process ◽  
Machining Strategies ◽  
Selection Of

High-speed machining requires the support of high intelligent CAM software as well as customized machining strategies and properly selected machining parameters. Only by combining the two can the advantage of high-speed machining be made full use of. Compared to ordinary NC cutting, high-speed machining has special requirements for process strategies, CAM system and tool path. A complete tool path includes approaching/retracting tool, moving tool and tool path. Based on the above principles, a mould part is successfully processed using the PowerMILL software at the high-speed machining centre of DMG-DMU40T. The maximum hardness of the mould part is HRC50. There’s a 30 degree corner in the cavity with a transition radius of 3mm. The whole process can be divided into three stages: rough, semi-finish and finish machining and each stage involves the selection of tool path, the selection of tool, the selection of cutting parameters (including spindle speed, feed speed and depth of cut), and the application of PowerMILL specific machining methods (such as Race-line machining, rest roughing, automatic trochoidal machining, 3D offset finishing and etc).

Sign in / Sign up

Export Citation Format

Share Document