Synthesis and Properties of Thermotropic Liquid Crystalline Polyesters with Flexible Polymethylene Spacer

2010 ◽  
Vol 428-429 ◽  
pp. 126-131
Author(s):  
Wei Zhong Lu ◽  
Chun Wei ◽  
Qui Shan Gao
Keyword(s):  
Optical Microscopy ◽  
Liquid Crystalline ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Structure Morphology ◽  
Temperature Ranges ◽  
Ft Ir ◽  
Diffraction Peaks ◽  
Ubbelohde Viscometer

Polymethylene bis(p-hydroxybenzoates) were prepared from methyl p-hydroxybenzoate and different diols by melted transesterification reaction. Three liquid crystalline polyesters were synthesized from terephthaloyl dichloride and polymethylene bis(p-hydroxybenzoates). Its structure, morphology and properties were characterized by Ubbelohde viscometer, Fourier transform infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC), polarized optical microscopy (POM) with a hot stage, and wide-angle X-ray diffraction (WAXD). Results indicated that the intrinsic viscosities were between 0.088 and 0.210 dL/g. Optical microscopy showed that the TLCP has a highly threaded liquid crystalline texture and a high birefringent schlieren texture character of nematic phase and has wider mesophase temperature ranges for all polyesters. DSC analysis were found that the melting point (Tm), isotropic temperature (Ti) of TLCPs decreased and the temperature range of the liquid crystalline phase became wider with increased number of methylene spacers in the polyester. The WAXD results showed that TLCPs owned two strong diffraction peaks at 2θ near 19° and 23°.

Liquid crystalline polyureas with oligo(ethylene glycol) sequences

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Shahram Mehdipour-Ataei ◽  
Leila Akbarian-Feizi
Keyword(s):  
Liquid Crystalline ◽  
Spectroscopic Method ◽  
Polymerization Reaction ◽  
X Ray Diffraction ◽  
Subsequent Reaction ◽  
Scanning Calorimetry ◽  
Polar Solvents ◽  
X Ray ◽  
H Nmr ◽  
Ft Ir

AbstractA diamine monomer containing ester, amide and ether functional groups was prepared and its polymerization reaction with different diisocyanates to give main chain poly(ester amide ether urea)s was investigated. The monomer was synthesized via reaction of terephthaloyl chloride with 4-hydroxybenzoic acid and subsequent reaction of the resulted diacid with 1,8-diamino-3,6-dioxaoctane. The polymers were characterized by FT-IR and 1H-NMR spectroscopic method and elemental analysis. The resulting polymers exhibited excellent solubility in polar solvents. Crystallinity of the resulted polymers was evaluated by wide-angle X-ray diffraction (WXRD) method, and they exhibited semi-crystalline patterns. The glass transition temperatures (Tg) of the polymers determined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA) were in the range of 88-112 °C. The temperatures for 10% weight loss (T10) from their thermogravimetric analysis (TGA) curves were found to be in the range of 297-312 °C in air. Also the prepared polyureas showed liquid crystalline character.

scholarly journals Hydrothermal Synthesis, Characterization and Exploration of Photocatalytic Activities of Polyoxometalate: Ni-CoWO4 Nanoparticles

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 456
Author(s):  
Fahad A. Alharthi ◽  
Hamdah S. Alanazi ◽  
Amjad Abdullah Alsyahi ◽  
Naushad Ahmad
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Photocatalytic Activities ◽  
Ft Ir ◽  
Photocatalytic Reactions ◽  
Cobalt Tungstate

This study demonstrated the hydrothermal synthesis of bimetallic nickel-cobalt tungstate nanostructures, Ni-CoWO4 (NCW-NPs), and their phase structure, morphology, porosity, and optical properties were examined using X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscopy- energy dispersive X-ray spectroscopy (SEM-EDS), high resolution Transmission electron microscopy (HR-TEM), Brunauer-Emmett-Teller (BET) and Raman instruments. It was found that as-calcined NCW-NPs have a monoclinic phase with crystal size ~50–60 nm and is mesoporous. It possessed smooth, spherical, and cubic shape microstructures with defined fringe distance (~0.342 nm). The photocatalytic degradation of methylene blue (MB) and rose bengal (RB) dye in the presence of NCW-NPs was evaluated, and about 49.85% of MB in 150 min and 92.28% of RB in 90 min degraded under visible light. In addition, based on the scavenger’s study, the mechanism for photocatalytic reactions is proposed.

Synthesis of Spherical LiFePO4/C Composites as Cathode Material of Lithium-Ion Batteries by a Novel Glucose Assisted Hydrothermal Method

2013 ◽  
Vol 787 ◽  
pp. 58-64 ◽  
Author(s):  
Xiang Feng Li ◽  
Zhao Zhang ◽  
Fang Liu ◽  
Shu Ping Zheng
Keyword(s):  
Hydrothermal Method ◽  
Raw Materials ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
High Discharge ◽  
X Ray ◽  
High Discharge Capacity ◽  
Optimal Sample ◽  
Structure Morphology

The LiFePO4/C composites with different morphology are synthesized by a novel glucose assisted hydrothermal method at various glucose concentrations (from 0 to 0.25mol/L) and the insoluble lithium source Li2CO3, (NH4)2Fe (SO4)2·6H2O and (NH4)2HPO4(n (Li):n (Fe):n (P)=1:1:1) are used as raw materials. The structure, morphology, thermal performance and electrochemical properties of the synthesized composites are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), thermogravimetry/differential scanning calorimetry (TG-DSC), galvanostatic charge/discharge tests and cyclic voltammetry (CV). The results show that the LiFePO4/C synthesized with 0.125mol/L glucose has the relatively small particles size (0.1~0.5μm) and the well spherical morphology. The optimal sample exhibits a high discharge capacity of 160.0mAh/g at the first cycle and exhibits a good reversibility and stability in CV tests.

scholarly journals Synthesis and mesomorphic properties of calamitic malonates and cyanoacetates tethered to 4-cyanobiphenyls

2012 ◽  
Vol 8 ◽  
pp. 371-378 ◽  
Author(s):  
Katharina C Kress ◽  
Martin Kaller ◽  
Kirill V Axenov ◽  
Stefan Tussetschläger ◽  
Sabine Laschat
Keyword(s):  
Differential Scanning Calorimetry ◽  
Ambient Temperature ◽  
Liquid Crystalline ◽  
X Ray Diffraction ◽  
Cyanoacetic Acid ◽  
Scanning Calorimetry ◽  
Isotropic Liquid ◽  
X Ray ◽  
Nematic Phases ◽  
Mesomorphic Properties

4-Cyano-1,1'-biphenyl derivatives bearing ω-hydroxyalkyl substituents were reacted with methyl 3-chloro-3-oxopropionate or cyanoacetic acid, giving liquid-crystalline linear malonates and cyanoacetates. These compounds formed monotropic nematic phases at 62 °C down to ambient temperature upon cooling from the isotropic liquid. The mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction (WAXS).

Thermotropic behavior of sodium cholesteryl carbonate

2009 ◽  
Vol 24 (1) ◽  
pp. 156-163 ◽  
Author(s):  
Rabkwan Chuealee ◽  
Timothy S. Wiedmann ◽  
Teerapol Srichana
Keyword(s):  
Phase Behavior ◽  
Chemical Structure ◽  
Liquid Crystalline ◽  
Polarized Light ◽  
Wave Number ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering ◽  
C Nmr

Sodium cholesteryl carbonate ester (SCC) was synthesized, and its phase behavior was studied. The chemical structure was assessed by solid-state infrared spectroscopy based on vibration analysis. The wave number at 1705 and 1276 cm−1 corresponds to a carbonyl carbonate and O–C–O stretching of SCC, respectively. Molecular structure of SCC was further investigated with 1H and 13C NMR spectroscopy. The chemical shift, for the carbonyl carbonate resonance appeared at 155.5 ppm. A molecular mass of SCC was at m/z of 452. Differential scanning calorimetry (DSC), video-enhanced microscopy (VEM) together with polarized light microscopy, and small-angle x-ray scattering (SAXS) were used to characterize the phase behavior as a function of temperature of SCC. Liquid crystalline phase was formed with SCC. Based on the thermal properties and x-ray diffraction, it appears that SCC forms a structure analogous to the type II monolayer structure observed with cholesterol esters.

Inosose-Flüssigkristalle / Inosose Liquid Crystals

1990 ◽  
Vol 45 (7) ◽  
pp. 1084-1090 ◽  
Author(s):  
Klaus Praefcke ◽  
Bernd Kohne ◽  
Andreas Eckert ◽  
Joachim Hempel
Keyword(s):  
Differential Scanning Calorimetry ◽  
Liquid Crystal ◽  
High Temperature ◽  
Liquid Crystalline ◽  
Structural Features ◽  
Lyotropic Liquid Crystal ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Alkyl Chains

Six S,S-dialkyl acetals 2a-f of inosose (1), tripodal in structure, have been synthesized, characterized and investigated by optical microscopy and differential scanning calorimetry (d.s.c.). The four S,S-acetals 2c-f with sufficiently long alkyl chains are thermotropic liquid crystalline; 2 e and 2 f are even dithermomesomorphic. Each of these four inosose derivatives 2c-f exhibits monotropically a most likely cubic mesophase (MI); in addition 2e and 2f show enantiotropically a hexagonal mesophase (Hx) with a non-covalent, supramolecular H-bridge architecture. Whereas the nature of the optically isotropic mesophase MI needs further clarification the stable high temperature mesophase Hx of 2 e and 2 f has been established by a miscibility test using a sugar S,S-dialkyl acetal also tripodal in structure and with a Hx phase proved by X-ray diffraction, but in contrast to 2 with an acyclic hydrophilic part. Similarities of structural features between the Hx-phases of 2e and 2f as well as of other thermotropic and lyotropic liquid crystal systems are discussed briefly.

scholarly journals Discotic Liquid Crystals Based on Cu(I) Complexes with Benzoylthiourea Derivatives Containing a Perfluoroalkyl Chain

2018 ◽  
Vol 2018 ◽  
pp. 1-10
Author(s):  
Monica Iliş ◽  
Viorel Cîrcu
Keyword(s):  
Liquid Crystalline ◽  
Large Temperature ◽  
Discotic Liquid Crystals ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Polarized Optical Microscopy ◽  
X Ray ◽  
Ir And Nmr Spectroscopy ◽  
Hexagonal Columnar ◽  
Mesomorphic Properties

Mesomorphic three-coordinate copper(I) complexes ([Cu(BTU)2X], where X = Cl or Br) based on a new N-benzoylthiourea (BTU) ligand with two decyloxy and one perfluorooctyl groups at its periphery were designed and prepared. The BTU ligand coordinates via the S atom in a neutral monodentate fashion as confirmed by IR and NMR spectroscopy data. The liquid crystalline behavior of these copper(I) complexes was investigated by a combination of polarized optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray diffraction analysis (XRD), while their thermal stability was studied by thermogravimetric analysis (TGA). These new copper(I) complexes have mesomorphic properties and exhibit a hexagonal columnar mesophase over a large temperature range, more than 100°C.

Compatibility between Magnesium Stearate and Pharmaceutical Acidic Active Compounds/Excipients with DSC

2020 ◽  
Vol 856 ◽  
pp. 190-197
Author(s):  
Pornsit Chaiya ◽  
Thawatchai Phaechamud
Keyword(s):  
Differential Scanning Calorimetry ◽  
Magnesium Stearate ◽  
X Ray Diffraction ◽  
Salt Form ◽  
Scanning Calorimetry ◽  
Powder Mixtures ◽  
X Ray ◽  
Pharmaceutical Excipients ◽  
Drug Compounds ◽  
Ft Ir

Compatibility investigation was performed between magnesium stearate and acidic drug compounds (ibuprofen, indomethacin and valproic acid) and acidic pharmaceutical excipients (lactic acid and citric acid) using differential scanning calorimetry (DSC). DSC study indicated the possible incompatibility for the mixture between magnesium stearate and any compounds. Alteration in DSC thermogram was found in all mixtures. The eutectic phenomenon was found in the powder mixture of magnesium stearate and ibuprofen. In addition, the presence of melting endothermic peak of stearic acid in other powder mixtures except the mixture of magnesium stearate and indomethacin indicating breakage of salt form of magnesium stearate. This alteration could relate to the influence on physicochemical properties of drug compounds and pharmaceutical excipients which powder x-ray diffraction (PXRD) and Fourier Transform Infrared Spectroscopy (FT-IR) should be further analyzed to confirm the interactions between compounds.

scholarly journals Preparation and Properties of Ginger Essential Oil β-Cyclodextrin/Chitosan Inclusion Complexes

Coatings ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 305 ◽  
Author(s):  
Yan Zhang ◽  
Hui Zhang ◽  
Fang Wang ◽  
Li-Xia Wang
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Spray Drying ◽  
Small Particle Size ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir ◽  
Thermal Stability Of ◽  
Scanning Electron

The ginger essential oil/β-cyclodextrin (GEO/β-CD) composite, ginger essential oil/β-cyclodextrin/chitosan (GEO/β-CD/CTS) particles and ginger essential oil/β-cyclodextrin/chitosan (GEO/β-CD/CTS) microsphere were prepared with the methods of inclusion, ionic gelation and spray drying. Their properties were studied by using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermo-gravimetry analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The results showed that the particle size of GEO/β-CD composite was smaller than that of β-CD and GEO/β-CD/CTS particles were loose and porous, while the microsphere obtained by spray drying had certain cohesiveness and small particle size. Besides, results also indicated that β-CD/CTS could modify properties and improve the thermal stability of GEO, which would improve its application value in food and medical industries.

Study of the Liquid Crystalline Phases in Some Compounds of 4-Trans-(4-Alkyl)Cyclo-Hexylphenyl-Alkylcarboxylate

1983 ◽  
Vol 38 (12) ◽  
pp. 1362-1364 ◽  
Author(s):  
I. H. Ibrahim ◽  
W. Haase
Keyword(s):  
Differential Scanning Calorimetry ◽  
Nematic Phase ◽  
Liquid Crystalline ◽  
Intermolecular Distance ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Enthalpy Changes ◽  
Liquid Crystalline Phases ◽  
Nematic Phases

Abstract Three mesogenic compounds of the general formula have been investigated by differential scanning calorimetry. thermal optical microscopy and X-ray diffraction methods/Enthalpy changes of The different phase transitions for these compounds have been determined. H33 exhibits smectic B and nematic phases, whereas H34 and H75 exhibit only smectic B phases. The thickness of the smectic layers and the average intermolecular distance have been evaluated, as well as the corresponding molecular parameters in the nematic phase.

Sign in / Sign up

Export Citation Format

Share Document