Influence of Annealing Process on the Magnetic Induction Effect of FeSiB Amorphous Alloy Ribbons

2010 ◽  
Vol 428-429 ◽  
pp. 470-474
Author(s):  
Xiao Jun Wang ◽  
Xiao Guang Fu
Keyword(s):  
Magnetic Field ◽  
Amorphous Alloy ◽  
Magnetic Induction ◽  
Annealing Process ◽  
Induction Effect ◽  
Positive Pulse ◽  
Field Density ◽  
Frequency Magnetic Field ◽  
Input Waveform ◽  
The Magnetic Field

The influences of frequency, magnetic field density, importing waveform and annealing process on the rangeability of Fe78Si9B13 amorphous alloy ribbon’s magnetic induction effect were studied. The results showed that the rangeability increased with the magnetic field density increased when frequency below 75 kHz, but decreased with the field density increased when frequency over 75 kHz. Compared with quenched ribbons, the rangeability increase after annealed, and the rangeability reached maximum annealed at 300°C for 1.5 hours. When the input waveform is 75 kHz positive pulse and field intensity is 358A/m, the rangeability the quenched ribbons was 2.27V but it reached to 2.85V after annealed at 300°C for 1.5hours.

Magnetic Induction Effect of Amorphous Ribbon Modified by Rare-Earth

2010 ◽  
Vol 152-153 ◽  
pp. 587-591 ◽  
Author(s):  
Da Guo Jiang
Keyword(s):  
Magnetic Field ◽  
Rare Earth ◽  
Amorphous Alloy ◽  
Magnetic Induction ◽  
Amorphous Ribbon ◽  
Induction Effect ◽  
Temperature Influence ◽  
Rare Earth La ◽  
The Magnetic Field ◽  
Rare Earth Content

Prepared rare-earth La modified amorphous ribbon by doping Rare-earth La in Fe78Si9B13 amorphous alloy. Investigated rare-earth content and temperature, as well as their influence on the magnetic induction effect and it’s amplitude. The results show that, when magnetic field is less than 1356 A / m, with the increase of Rare-earth content ,the magnetic induction effect first increased and then decreased, when the magnetic field strength greater than 1356 A / m, the Rare-earth content influence little on magnetic induction effect , changing amplitude of magnetic induction effect shows first increased and then decreased with increasing Rare-earth content; temperature influence little on the magnitude of magnetic induction effect.

Study on the Magnetic Induction Effect of Rare-Earth La Modified Amorphous Ribbons

2011 ◽  
Vol 415-417 ◽  
pp. 527-531
Author(s):  
Da Guo Jiang ◽  
Cao Bing Yang ◽  
Guo Tai Zheng
Keyword(s):  
Magnetic Field ◽  
Rare Earth ◽  
Magnetic Induction ◽  
Annealing Temperature ◽  
Amorphous Ribbon ◽  
Induction Effect ◽  
Amorphous Ribbons ◽  
Rare Earth La ◽  
The Magnetic Field ◽  
Rare Earth Content

Prepared rare-earth La modified amorphous ribbon by doping Rare-earth La in Fe78Si9B13amorphous alloy. Investigated rare-earth content and annealing temperature as well as their influence on the magnetic induction effect and its amplitude. The results show that, when magnetic field is less than 1356 A/m, with the increase of Rare-earth content,the magnetic induction effect first increased and then decreased, when the magnetic field strength greater than 1356 A/m, the Rare-earth content influence little on magnetic induction effect, changing amplitude of magnetic induction effect shows first increased and then decreased with increasing Rare-earth content.

scholarly journals ANALYSIS OF HIGH-FREQUENCY C-CORE MAGNETIC FLUX LEAKAGES FOR BONE TUMOR WITH INDUCTION HEATING BY USING MULTI-COIL

2019 ◽  
Author(s):  
Metharak Jokpudsa ◽  
Supawat Kotchapradit ◽  
Chanchai Thongsopa ◽  
Thanaset Thosdeekoraphat
Keyword(s):  
Magnetic Field ◽  
High Frequency ◽  
Tumor Tissue ◽  
Low Frequency ◽  
Heat Energy ◽  
High Frequencies ◽  
Frequency Magnetic Field ◽  
High Frequency Magnetic Field ◽  
The Magnetic Field ◽  
Flux Leakage

High-frequency magnetic field has been developed pervasively. The induction of heat from the magnetic field can help to treat tumor tissue to a certain extent. Normally, treatment by the low-frequency magnetic field needed to be combined with magnetic substances. To assist in the induction of magnetic fields and reduce flux leakage. However, there are studies that have found that high frequencies can cause heat to tumor tissue. In this paper present, a new magnetic application will focus on the analysis of the high-frequency magnetic nickel core with multi-coil. In order to focus the heat energy using a high-frequency magnetic field into the tumor tissue. The magnetic coil was excited by 915 MHz signal and the combination of tissues used are muscle, bone, and tumor. The magnetic power on the heating predicted by the analytical model, the power loss density (2.98e-6 w/m3) was analyzed using the CST microwave studio.

scholarly journals Field- and Stress-Induced Magnetic Anisotropy in Nanocrystalline Fe-Based and Amorphous Co-Based Alloys

1999 ◽  
Vol 32 (1-4) ◽  
pp. 289-294
Author(s):  
V. A. Lukshina ◽  
N. V. Dmitrieva ◽  
A. P. Potapov
Keyword(s):  
Magnetic Field ◽  
Magnetic Properties ◽  
Amorphous Alloy ◽  
Magnetic Anisotropy ◽  
Thermomechanical Treatment ◽  
Nanocrystalline Alloy ◽  
Complex Effect ◽  
Induced Magnetic Anisotropy ◽  
The Magnetic Field

For nanocrystalline alloy Fe73.5Cu1Nb3Si13.5B9 thermomechanical treatment was carried out simultaneously with nanocrystallizing annealing (1) or after it (2). It was shown that a change in magnetic properties for the case 1 is essentially greater than for the case 2. Complex effect of thermomagnetic and thermomechanical treatments on magnetic properties was studied in the above-mentioned nanocrystalline alloy as well as in the amorphous alloy Fe5Co70.6Si15B9.4., During the annealings both field and stress were aligned with the long side of the specimens. It was shown that the magnetic field, AC or DC, decreases an effect of loading. Moreover, the magnetic field, AC or DC, applied after stress-annealing can destroy the magnetic anisotropy already induced under load.

Magnetic and magnetoresistive properties of nanocomposites based on Co and SiO

2019 ◽  
Vol 33 (12) ◽  
pp. 1950113 ◽  
Author(s):  
I. M. Pazukha ◽  
Y. O. Shkurdoda ◽  
A. M. Chornous ◽  
L. V. Dekhtyaruk
Keyword(s):  
Magnetic Field ◽  
Thin Film ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Annealing Process ◽  
Anisotropic Character ◽  
Co Concentration ◽  
Beam Method ◽  
The Magnetic Field ◽  
Film Nanocomposites

A series of thin-film nanocomposites based on ferromagnetic metal Co and insulator SiO were prepared using an electron-beam method. The magnetoresistive and magnetic properties of these structures deposited at room temperature and then annealed to 700 K were investigated. The results showed that at the Co concentration 40 [Formula: see text]x [Formula: see text] 60 at.%, thin-film nanocomposites exhibit magnetoresistance (MR) that is conditional on spin-dependent tunnelling of electrons. This range of concentrations corresponds to the prepercolation area according to the magnetic investigations. For samples with x [Formula: see text] 70 at.%, the anisotropic character of MR peculiar to the homogeneous ferromagnetic materials appears. According to the magnetic properties study, this range of concentrations corresponds to the area after transition through the percolation threshold. The annealing process in temperature range from 300 K to 700 K in the magnetic field slightly influenced the magnetoresistive properties of the thin-film nanocomposites based on Co and SiO for all range of concentrations.

Numerical Analysis of Electromagnetic Levitation Employing Meshless Method Based on Weighted Least Square Method

2015 ◽  
Vol 15 (1) ◽  
pp. 29-34 ◽  
Author(s):  
Shuhei Matsuzawa ◽  
Kenta Mitsufuji ◽  
Yurika Miyake ◽  
Katsuhiro Hirata ◽  
Fumikazu Miyasaka
Keyword(s):  
Magnetic Field ◽  
Meshless Method ◽  
Fluid Motion ◽  
Electromagnetic Levitation ◽  
Least Square Method ◽  
Least Square ◽  
Weighted Least Square ◽  
Frequency Magnetic Field ◽  
Thermo Physical Properties ◽  
The Magnetic Field

AbstractElectromagnetic levitation is a kind of magnetohydrodynamic phenomena which is useful to measure the thermo-physical properties of pure metals under high temperature. However, this phenomenon is complicated and detailed mechanisms of this phenomenon have not been clarified yet. This study proposes the meshless method based on weighted least square method for the analysis of electromagnetic levitation. In this study, the fluid motion equation and the magnetic field equation are coupled by this method. The behavior of a molten metal under high-frequency magnetic field is calculated by this method.

Simulation Research on the Magnetic Field of the Positioning Permanent Magnet for MEMS inside Human Body Based on Ansoft

2014 ◽  
Vol 596 ◽  
pp. 67-71
Author(s):  
Xiu Quan Liu ◽  
Yan Hong Li
Keyword(s):  
Magnetic Field ◽  
Permanent Magnet ◽  
Magnetic Dipole ◽  
Human Body ◽  
Magnetic Induction ◽  
Dipole Model ◽  
Magnetization Direction ◽  
Simulation Research ◽  
Magnetic Induction Intensity ◽  
The Magnetic Field

the magnetic dipole model of the cylindrical permanent magnet was introduced. Then, based on Ansoft software, the simulation model of the cylindrical permanent magnet was established, and the influence of some parameters, such as the height, radius and magnetization direction on the magnetic induction intensity ,were studied; at the same time, under these two models the calculation was compared, the result shows the the magnetic dipole model is applied on condition that distance is nine times greater than the cylindrical permanent magnet size.

scholarly journals Influence of magnetic field on change of activation energy during pre-sowing seed treatment

2020 ◽  
pp. 17-25
Author(s):  
V. Savchenko ◽  
◽  
O. Synyavsky ◽  
D. Rosengart ◽  
V. Bunko ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Activation Energy ◽  
Magnetic Induction ◽  
Seed Treatment ◽  
Crop Yields ◽  
Magnetic Field Gradient ◽  
Agricultural Crops ◽  
Experimental Planning ◽  
Sowing Seed ◽  
The Magnetic Field

It is possible to increase crop yields and product quality through the use of electrophysical methods of pre-sowing seed treatment, among which pre-sowing seed treatment in a magnetic field is promising. For successful introduction of magnetic seed treatment in production it is necessary to establish mode parameters of treatment and their optimum values. To do this, it is necessary to establish the effect of the magnetic field on the change in activation energy during pre-sowing seed treatment. The aim of the study was to determine the change in activation energy during pre-sowing treatment of crop seeds in a magnetic field. To determine the change in the activation energy, the change in the biopotential of the seed during its treatment in a magnetic field was experimentally investigated by the experimental planning method. It was found that the change in seed biopotential depends on the square of the magnetic induction and the velocity of the seed in a magnetic field. An analytical expression was obtained that relates the change in activation energy to the change in seed biopotential, which made it possible to establish the dependence of the change in activation energy on the treatment parameters. It was found that the greatest seed biopotential and activation energy change at a magnetic induction of 0.065 T, a magnetic field gradient of 0.57 T/m and a velocity of 0.4 m/s. Under this mode of pre-sowing seed treatment of agricultural crops, the activation energy changes by 3.1 - 5.7 kJ/g-eq.

scholarly journals Self-Organizing Map Classification of the Extremely Low-Frequency Magnetic Field Produced by Typical Tablet Computers

2018 ◽  
Vol 18 (3) ◽  
pp. 94-99
Author(s):  
Darko Brodić ◽  
Alessia Amelio ◽  
Ivo R. Draganov
Keyword(s):  
Magnetic Field ◽  
Low Frequency ◽  
Self Organizing Map ◽  
Tablet Computers ◽  
High Exposure ◽  
Extremely Low Frequency ◽  
Frequency Magnetic Field ◽  
The Magnetic Field ◽  
Self Organizing

Abstract In this paper, the extremely low frequency magnetic field produced by the tablet computers is explored. The measurement of the tablet computers’ magnetic field is performed by using a measuring geometry previously proposed for the laptop computers. The experiment is conducted on five Android tablet computers. The measured values of the magnetic field are compared to the widely accepted TCO safety standard. Then, the results are classified by the Self-Organizing Map method in order to create different levels of safety or danger concerning the magnetic field to which tablet computer users are exposed. Furthermore, a brief comparison of the obtained magnetic field levels with the ones from typical laptops is performed. At the end, a practical suggestion on how to avoid the high exposure to the low frequency magnetic field emitted by the tablet computers is given.

scholarly journals Determination Transition Resistance of Cathode-Polarized Main Pipeline on Magnetometery Data

2021 ◽  
Vol 6 (6) ◽  
pp. 1729-1740
Author(s):  
Vladimir N. Krizsky ◽  
Pavel N. Alexandrov ◽  
Alexey A. Kovalskii ◽  
Sergey V. Victorov
Keyword(s):  
Magnetic Field ◽  
Inverse Problem ◽  
Cathodic Protection ◽  
Magnetic Induction ◽  
Solution Method ◽  
Main Pipeline ◽  
Induction Vector ◽  
Magnetic Induction Vector ◽  
Transition Resistance ◽  
The Magnetic Field

The article deals with the inverse problem of determining the transient resistance of the main pipeline insulating coating. For this, UAV measurements of the magnetic induction vector modulus of the magnetic field excited by the system of electrochemical cathodic protection of pipelines are used. The solution method is based on Tikhonov's method for finding the extremal of the regularizing functional. The developed algorithm is implemented in software. The results of computational experiments are presented.

Sign in / Sign up

Export Citation Format

Share Document