Influence of Magnetic Field Strength on Polishing Effect of the Tiny-Grinding Wheel Cluster Based on the Magnetorheological Effect

2010 ◽  
Vol 443 ◽  
pp. 406-410 ◽  
Author(s):  
Jie Wen Yan ◽  
Qiu Sheng Yan ◽  
Jia Bin Lu ◽  
Wei Qiang Gao
Keyword(s):  
Magnetic Field ◽  
Surface Roughness ◽  
Field Strength ◽  
Magnetic Field Strength ◽  
Material Removal Rate ◽  
Carbonyl Iron ◽  
Material Removal ◽  
Optical Glass ◽  
Removal Rate ◽  
Grinding Wheel

A new tiny-grinding wheel cluster polishing method based on the Magnetorheological (MR) effect is presented to polish optical glass in this paper and some process experiments were conducted to reveal the influence of magnetic field strength, the content of carbonyl iron in the MR fluid and the speed of polishing disc on the material removal rate and the surface roughness of the glass workpiece. The results indicate that when the external magnetic field is applied, the material removal rate of the workpiece improves rapidly but the surface roughness increases slightly. When the Magnetic field strength is 100 Gs and the content of carbonyl iron is 3.5%, the material removal rate improves by a factor of 16.8% compared with that of the conventional polishing methods with dissociative abrasive particles, while the surface roughness of the workpiece increases unobviously.

Parametric Study of Micro Machining Three Dimensional Microstructure with the Tiny-Grinding Wheel Based on the EMR Effect

2010 ◽  
Vol 447-448 ◽  
pp. 193-197
Author(s):  
Wei Qiang Gao ◽  
Qiu Sheng Yan ◽  
Yi Liu ◽  
Jia Bin Lu ◽  
Ling Ye Kong
Keyword(s):  
Magnetic Field ◽  
Material Removal Rate ◽  
Feed Rate ◽  
Material Removal ◽  
Rotation Speed ◽  
Optical Glass ◽  
Removal Rate ◽  
Grinding Wheel ◽  
Machining Time ◽  
Fluctuation Phenomenon

Electro-magneto-rheological (EMR) fluids, which exhibit Newtonian behavior in the absence of a magnetic field, are abruptly transformed within milliseconds into a Bingham plastic under an applied magnetic field, called the EMR effect. Based on this effect, the particle-dispersed EMR fluid is used as a special instantaneous bond to cohere abrasive particles and magnetic particles together so as to form a dynamical, flexible tiny-grinding wheel to machine micro-groove on the surface of optical glass. Experiments were conducted to reveal the effects of process parameters, such as the feed rate of the horizontal worktable, feeding of the Z axis, machining time and machining gap, on material removal rate of glass. The results indicate that the feed rate of the worktable at horizontal direction has less effect on material removal rate, which shows a fluctuation phenomenon within a certain range. The feed rate of the Z axis directly influences the machining gap and leads to a remarkable change on material removal rate. Larger material removal rate can be obtained when the feeding frequency of Z direction is one time per processing. With the increase of rotation speed of the tool, material removal rate increases firstly and decreases afterwards, and it gets the maximum value with the rotation speed of 4800 rev/min. The machining time is directly proportional to material removal amount, but inversely proportional to material removal rate. Furthermore, material removal rate decreases with the increase of the machining gap between the tool and the workpiece. On the basis of above, the machining mode with the tiny-grinding wheel based on the EMR effect is presented.

Influence of Abrasive on Planarization Polishing with the Tiny-Grinding Wheel Cluster Based on the Magnetorheological Effect

2009 ◽  
Vol 76-78 ◽  
pp. 229-234 ◽  
Author(s):  
Qiu Sheng Yan ◽  
Yong Yang ◽  
Jia Bin Lu ◽  
Wei Qiang Gao
Keyword(s):  
Surface Roughness ◽  
Particle Size ◽  
Material Removal Rate ◽  
Material Removal ◽  
Magnetic Particles ◽  
Optical Glass ◽  
Removal Rate ◽  
Grinding Wheel ◽  
Material Particle ◽  
Material Removal Model

Experiments were conducted to polish optical glass with the magnetorheological (MR) effect-based tiny-grinding wheel cluster, and the influences of abrasive material, particle size and content on the material removal rate and surface roughness are investigated. The experimental results indicate that: the higher the hardness of abrasives, the higher the material removal rate, but the abrasives with lower hardness can obtain lower surface roughness. The better polishing quality of the workpiece can be obtained when the particle size of abrasives is similar to the particle size of magnetic particles. Moreover, the content of abrasives has an optimum value, and the material removal rate and the surface quality can not be improved further when the content of abrasives exceeds the optimum value. On the basis of above, the material removal model of the new planarization polishing technique is presented.

Development of a New Plate Polishing Technique with an Instantaneous Tiny-Grinding Wheel Cluster Based on Magnetorheological Effect

2008 ◽  
Vol 53-54 ◽  
pp. 155-160 ◽  
Author(s):  
Qiu Sheng Yan ◽  
Ai Jun Tang ◽  
Jia Bin Lu ◽  
Wei Qiang Gao
Keyword(s):  
Surface Roughness ◽  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Grinding Wheel ◽  
Abrasive Particles ◽  
Magnetorheological Effect ◽  
Material Removal Model ◽  
Mr Effect ◽  
Removal Model

A new plate polishing technique with an instantaneous tiny-grinding wheel cluster based on the magnetorheological (MR) effect is presented in this paper, and some experiments were conducted to prove its effectiveness and applicability. Under certain experimental condition, the material removal rate was improved by a factor of 20.84% as compared with the conventional polishing methods with dissociative abrasive particles, while the surface roughness of the workpiece was not obviously increased. Furthermore, the composite of the MR fluid was optimized to obtain the best polishing performance. On the basis of the experimental results, the material removal model of the new plate polishing technique was presented.

Ultra Smooth Planarization Polishing Technique Based on the Cluster Magnetorheological Effect

2010 ◽  
Vol 135 ◽  
pp. 18-23 ◽  
Author(s):  
Qiu Sheng Yan ◽  
Jie Wen Yan ◽  
Jia Bin Lu ◽  
Wei Qiang Gao
Keyword(s):  
Surface Roughness ◽  
Carbonyl Iron ◽  
Material Removal ◽  
Optical Glass ◽  
Removal Rate ◽  
Polished Surface ◽  
Mr Fluid ◽  
Magnetorheological Effect ◽  
The Difference ◽  
Mr Effect

A new planarization polishing method based on the cluster magnetorheological (MR) effect is presented to polish optical glass in this paper. Some process experiments were conducted to reveal the influence of the content of carbonyl iron and the abrasive materials in the MR fluid on the machining effect, and the machining characteristic of polished surface was studied. The results indicate that the surface roughness of the polished workpiece can be reduced rapidly when the strong magnetic field is applied, and ultra smooth surface with Ra 1.4 nm can be achieved while the CeO2 abrasives are used in the MR fluid. The content of carbonyl iron obviously influences the machining effect of this planarization polishing method based on cluster MR-effect. With the increase of the content of carbonyl iron in the MR fluid, the material removal rate improves and the surface roughness reduces rapidly. However, the difference of abrasive material results in various machining effects. As for the K9 optical glass, the CeO2 abrasive is better polishing abrasive than the SiC abrasive in the planarization polishing technique based on the cluster MR-effect.

Investigation into Chemo-Mechanical Fixed Abrasive Polishing of Fused Silica with the Assistance of Ultrasonic Vibration

2012 ◽  
Vol 523-524 ◽  
pp. 155-160 ◽  
Author(s):  
Ya Guo Li ◽  
Yong Bo Wu ◽  
Li Bo Zhou ◽  
Hui Ru Guo ◽  
Jian Guo Cao ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Ultrasonic Vibration ◽  
Material Removal Rate ◽  
Material Removal ◽  
Optical Glass ◽  
Removal Rate ◽  
Fused Silica ◽  
Processing Efficiency ◽  
Machined Surface ◽  
Fixed Abrasive

Ultrasonic vibration assisted processing is well known for the improvement in machined surface quality and processing efficiency due to the reduced forces and tribology-generated heating when grinding hard-brittle materials. We transplanted this philosophy to chemo-mechanical fixed abrasive polishing of optical glass, namely fused silica, in an attempt to improve surface roughness and/or material removal rate. Experiments were conducted to elucidate the fundamental characteristics of chemo-mechanical fixed abrasive polishing of fused silica in the presence and absence of ultrasonic vibration on a setup with an in-house built gadget. The experimental results show that ultrasonic vibration assisted chemo-mechanical fixed abrasive polishing can yield increased material removal rate while maintaining the surface roughness of manufactured optics compared to conventional fixed abrasive polishing without ultrasonic vibration. The mechanism of material removal in fixed abrasive polishing was also delved. We found that the glass material is removed through the synergic effects of chemical and mechanical actions between abrasives and glass and the resultant grinding swarf contains ample Si element as well as Ce element, standing in stark contrast to the polisher that contains abundant Ce element and minor Si element.

A study on magnetic field assisted laser percussion drilling and its effect on surface integrity

2018 ◽  
Vol 1 (94) ◽  
pp. 35-40
Author(s):  
S. Balamurugan ◽  
C. Bala Manikandan ◽  
P. Balamurugan
Keyword(s):  
Magnetic Field ◽  
Surface Roughness ◽  
Aluminium Alloy ◽  
Material Removal Rate ◽  
Material Removal ◽  
Removal Rate ◽  
Laser Drilling ◽  
Machining Process ◽  
Profile Error ◽  
Taper Angle

Purpose: of this paper is to reduce the taper angle and surface roughness of the laser drilled hole on Aluminium alloy with the assistance of magnetic field. At lower laser powers, able to achieve higher material removal rate in drilling with reduced taper angle and roughness. Design/methodology/approach: Aluminium alloy is a highly reflective material, while laser drilling it ejects plumes, which makes the drilling unreliable. The plume generated due to this action causes deteriorating effects over the work piece as such affecting surface textures. Removal of plume is the major consideration in laser machining process, especially in laser assisted drilling. The plume is a form of cluster of ions having charges in it. Due to the magnetic field input, the ions line the path along the lines of force of magnets. Thus, the ion cloud can be cleared at the localized plane, where the subsequent laser drilling going to be happens, leads to reduced plume thereby reduces the taper angle and surface roughness. Findings: The defect of percussion laser drilling that is barrelling effect in the drilled hole was reduced with the assistance of magnetic field setup. For the laser energy of 90 mJ, the magnetic assisted laser drilling shows better improvement in the material removal rate of 64.5%, the profile error (spatter height) was reduced to 45% and the taper angle of the drilled hole also reduced by 16.3%. The results confirmed the fact that, the Lorentz force confined the plume particle to be raised upwards and circulated outwards to the sidewall from the centre of the laser beam. This expansion of laser induced plasma plume, improved the material removal rate of the hole. Research limitations/implications: Laser drilling was carried out by a constant magnetic field and the parameters like material removal rate, taper angle, profile error, surface roughness were studied. In the future work, these parameters were studied with the application of varying magnetic field. Practical implications: As a result of the work, laser drilling was carried out on turbine blades or complex shapes for retention properties, with reduced taper hole and surface roughness, thereby improving the efficiency of the systems. Originality/value: The novelty of the work is providing magnetic flux for the laser drilling process, which improves the process parameters. The incorporation of magnetic field to the laser drill needs a cost less setup, which can ensure reliable improvement in the material removal rate, reduction in taper angle and profile error.

Research on Material Removal of a New Micro Machining Technology Based on the Magnetorheological Effect of Abrasive Slurry

2007 ◽  
Vol 364-366 ◽  
pp. 914-919 ◽  
Author(s):  
Juan Yu ◽  
Qiu Sheng Yan ◽  
Jia Bin Lu ◽  
Wei Qiang Gao
Keyword(s):  
Material Removal Rate ◽  
Material Removal ◽  
Magnetic Particles ◽  
High Efficiency ◽  
Rotation Speed ◽  
Optical Glass ◽  
Removal Rate ◽  
Grinding Wheel ◽  
Machining Time ◽  
Abrasive Particles

Based on the magnetorheological (MR) effect of abrasive slurry, the particle-dispersed MR fluid is used as a special instantaneous bond to cohere abrasive particles and magnetic particles so as to form a dynamic, flexible tiny-grinding wheel to polish optical glass, ceramic and other brittle materials of millimeter or sub-millimeter scale with a high efficiency. Experiments were conducted to reveal the effects of different process parameters, such as grain sizes of abrasive particles, machining time, machining gap between the workpiece and the rotation tool, and rotation speed of the tool, on material removal rate of glass surface. The results indicate the following conclusions: material removal rate increases when the grain size of abrasives is similar to that of magnetic particles; machining time is directly proportional to material removal, but inversely proportional to material removal rate; machining gap is inversely proportional to material removal; polishing speed has both positive and negative influence on material removal rate, and greater material removal rate can be obtained at a certain rotation speed. In addition, the difference of the machining characteristics between this new method and the traditional fixed-abrasive machining method is analyzed.

Chemical Mechanical Grinding Wheel for K9 Optical Glass

2013 ◽  
Vol 712-715 ◽  
pp. 579-583
Author(s):  
Bin Wang ◽  
Heng Zhen Dai ◽  
Zhu Ji Jin
Keyword(s):  
Surface Roughness ◽  
Solid State ◽  
Material Removal ◽  
Optical Glass ◽  
Removal Rate ◽  
Processing Parameters ◽  
Wheel Speed ◽  
Grinding Wheel ◽  
Mechanical Grinding ◽  
Dry Grinding

Chemical mechanical grinding (CMG) was applied in machining K9 optical glass. Eight types of CMG wheels were developed and their dry grinding performances were analyzed. The specific CMG wheel which contained 28%vol.abrasive,20%vol.porous and certain additives obtained satisfied surface quality and material removal rate, as result that the solid state reaction and mechanical elimination reached equilibrium. The CMG process parameters, including pressure, workpiece speed and wheel speed, were optimized by using orthogonal experimental method. The surface roughness can reach 0.461nm in Ra on the basis of optimized processing parameters.

Experimental and Mechanism Research on EDM Combined with Magnetic Field

2009 ◽  
Vol 416 ◽  
pp. 337-341 ◽  
Author(s):  
Ming Rang Cao ◽  
Yan Qing Wang ◽  
Sheng Qiang Yang ◽  
Weng Hui Li
Keyword(s):  
Magnetic Field ◽  
Surface Roughness ◽  
Material Removal Rate ◽  
Discharge Current ◽  
Material Removal ◽  
Discharge Channel ◽  
Removal Rate ◽  
Machining Parameters ◽  
Mechanism Research ◽  
First Time

The two disadvantages of EDM are the low material removal rate (MRR) and poor surface quality. In this investigation, EDM assisted by magnetic field (MFEDM) has been proposed for the first time to overcome above-mentioned disadvantages. Constant magnetic field was applied to the both sides of discharge channel perpendicularly to form a novel process. In experiment, EDM machine tool D703F was used to machine nonferromagnetic materials. The machining parameters discharge current and pulse duration were chosen to determine the effects on material removal rate and surface roughness.Experiment results indicate that the MRR of the combined machining is 1.2~3 times of EDM’s one. Furthermore, the value of surface roughness is also reduced. Therefore, the introduction of magnetic field to EDM has important academic and practical values to the development of EDM.

Effects of Process Parameters on Surface Roughness and MRR in the hard turning of EN 36 steel

2018 ◽  
pp. 102-110
Author(s):  
Amritpal Singh ◽  
Rakesh Kumar
Keyword(s):  
Surface Roughness ◽  
Material Removal Rate ◽  
Material Removal ◽  
Hard Turning ◽  
Control Parameter ◽  
Removal Rate ◽  
Cutting Speed ◽  
Depth Of Cut ◽  
Cutting Condition ◽  
Dry Cutting

In the present study, Experimental investigation of the effects of various cutting parameters on the response parameters in the hard turning of EN36 steel under the dry cutting condition is done. The input control parameters selected for the present work was the cutting speed, feed and depth of cut. The objective of the present work is to minimize the surface roughness to obtain better surface finish and maximization of material removal rate for better productivity. The design of experiments was done with the help of Taguchi L9 orthogonal array. Analysis of variance (ANOVA) was used to find out the significance of the input parameters on the response parameters. Percentage contribution for each control parameter was calculated using ANOVA with 95 % confidence value. From results, it was observed that feed is the most significant factor for surface roughness and the depth of cut is the most significant control parameter for Material removal rate.

Sign in / Sign up

Export Citation Format

Share Document