Fiber Reinforced Composite Structure with Bolted Joint – A Review

2011 ◽  
Vol 471-472 ◽  
pp. 939-944 ◽  
Author(s):  
Khudhayer J. Jadee ◽  
A.R. Othman
Keyword(s):  
Composite Structure ◽  
Composite Structures ◽  
High Strength ◽  
Strength Properties ◽  
Bolted Joints ◽  
Bolted Joint ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Reliable Design

Fiber reinforced composite structures are widely used in the aerospace, aircraft, civil and automotive applications due to their high strength-to-weight and stiffness-to-weight ratios and these applications require joining composite either to composite or to metal. There are three main methods for joining composite structures namely, bonding, mechanically fastened or a combination of the two. Bolted joint are preferred in structures where the disassembly is required for the purpose of maintenance and repair. Due to the stress concentration around the holes, bolted joints often represents the weakest part in the structure, and therefore it is important to design them safely. A review on the study of bolted joints in fiber reinforced composite structure is presented. It was found that the behavior of bolted joints in composite structure is affected by many factors, such as geometry, joint material, clamping–load provided by the bolts, ply orientations, etc. Accordingly, various researches have been conducted on the analyses of stress distribution, failure prediction, and strength properties of bolted joint both experimentally and numerically. Accurate prediction of stresses in bolted joints is essential for reliable design of the whole structure; if it is not optimally designed, premature and unexpected failures may be occurred.

The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures

2021 ◽  
pp. 096739112110141
Author(s):  
Ferhat Ceritbinmez ◽  
Ahmet Yapici ◽  
Erdoğan Kanca
Keyword(s):  
Composite Materials ◽  
Glass Fiber ◽  
Composite Structures ◽  
Fiber Composite ◽  
Cutting Speed ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Composite Layers

In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs additive in the composite production, the strength of the material has been changed and the more durable composite materials have been obtained. Slots were opened with different cutting speed and feed rate parameters to the composite layers. Surface roughness of the composite layers and slot size were examined and also abrasions of cutting tools used in cutting process were determined. It was observed that the addition of nanoparticles to the laminated glass fiber composite materials played an effective role in the strength of the material and caused cutting tool wear.

scholarly journals Fatigue performance of nanoclay filled glass fiber reinforced hybrid composite laminate

2017 ◽  
Author(s):  
◽  
John Olumide Olusanya
Keyword(s):  
Fatigue Life ◽  
Service Life ◽  
Glass Fiber ◽  
Residual Strength ◽  
Composite Structures ◽  
Fatigue Performance ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced

In this study, the fatigue life of fiber reinforced composite (FRC) materials system was investigated. A nano-filler was used to increase the service life of the composite structures under cyclical loading since such structures require improved structural integrity and longer service life. Behaviour of glass fiber reinforced composite (GFRC) enhanced with various weight percentages (1 to 5 wt. %) of Cloisite 30B montmorillonite (MMT) clay was studied under static and fatigue loading. Epoxy clay nanocomposite (ECN) and hybrid nanoclay/GFRC laminates were characterised using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The mechanical properties of neat GFRC and hybrid nanoclay/GFRC laminates were evaluated. Fatigue study of the composite laminates was conducted and presented using the following parameter; matrix crack initiation and propagation, interfacial debonding, delamination and S–N relationship. Residual strength of the materials was evaluated using DMA to determine the reliability of the hybrid nanoclay/GFRC laminates. The results showed that ECN and hybrid nanoclay/GFRC laminates exhibited substantial improvement in most tests when compared to composite without nanoclay. The toughening mechanism of the nanoclay in the GFRC up to 3 wt. % gave 17%, 24% and 56% improvement in tensile, flexural and impact properties respectively. In the fatigue performance, less crack propagations was found in the hybrid nanoclay/GFRC laminates. Fatigue life of hybrid nanoclay/GFRC laminate was increased by 625% at the nanoclay addition up to 3 wt. % when compared to neat GFRC laminate. The residual strength of the composite materials revealed that hybrid nanoclay/GFRC showed less storage modulus reduction after fatigue. Likewise, a positive shift toward the right was found in the tan delta glass transition temperature (Tg) of 3 wt. % nanoclay/GFRC laminate after fatigue. It was concluded that the application of nanoclay in the GFRC improved the performance of the material. The hybrid nanoclay/GFRC material can therefore be recommended mechanically and thermally for longer usage in structural application.

scholarly journals Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1667 ◽  
Author(s):  
Dipen Rajak ◽  
Durgesh Pagar ◽  
Pradeep Menezes ◽  
Emanoil Linul
Keyword(s):  
Composite Materials ◽  
High Strength ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Diverse Range ◽  
Promising Alternative ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Reinforced Polymer ◽  
Manufacturing Techniques

Composites have been found to be the most promising and discerning material available in this century. Presently, composites reinforced with fibers of synthetic or natural materials are gaining more importance as demands for lightweight materials with high strength for specific applications are growing in the market. Fiber-reinforced polymer composite offers not only high strength to weight ratio, but also reveals exceptional properties such as high durability; stiffness; damping property; flexural strength; and resistance to corrosion, wear, impact, and fire. These wide ranges of diverse features have led composite materials to find applications in mechanical, construction, aerospace, automobile, biomedical, marine, and many other manufacturing industries. Performance of composite materials predominantly depends on their constituent elements and manufacturing techniques, therefore, functional properties of various fibers available worldwide, their classifications, and the manufacturing techniques used to fabricate the composite materials need to be studied in order to figure out the optimized characteristic of the material for the desired application. An overview of a diverse range of fibers, their properties, functionality, classification, and various fiber composite manufacturing techniques is presented to discover the optimized fiber-reinforced composite material for significant applications. Their exceptional performance in the numerous fields of applications have made fiber-reinforced composite materials a promising alternative over solitary metals or alloys.

Sign in / Sign up

Export Citation Format

Share Document