Investigating X-Ray Bragg-Line Displacement as a Technique for Determination of the Thermal Expansion Coefficient of Solid Samples

2004 ◽  
Vol 443-444 ◽  
pp. 151-154 ◽  
Author(s):  
S. Battaglia ◽  
F. Mango
Keyword(s):  
Thermal Expansion ◽  
Thin Foil ◽  
Bulk Sample ◽  
Peak Position ◽  
Metal Foil ◽  
Joule Effect ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Wire Coil ◽  
Heat Dispersion

Thermal expansion coefficients (TEC) of some metallic samples and rocks, along with one sample of amorphous silica, were determined by means of a standard X-ray diffractometer without any modification to the equipment. Only the sample holder was modified in order to fix the sample within the standard goniometer and avoid heat dispersion into the chamber during heating of the sample. The latter was achieved by the Joule effect through a thermo-coaxial wire coil wrapped directly around the bulk sample. A thin metal foil, aluminium in our case, was placed on the flat surface of the cylinder sample. The variations in Al peak position recorded at various sample temperatures were related directly to the dilatation of the material supporting the thin foil.

The crystal structure and thermal expansion of the CCl4 adduct of Dianin's compound

1990 ◽  
Vol 68 (8) ◽  
pp. 1352-1356 ◽  
Author(s):  
Walter Abriel ◽  
André Du Bois ◽  
Marek Zakrzewski ◽  
Mary Anne White
Keyword(s):  
Crystal Structure ◽  
Thermal Expansion ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Guest Molecules ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients ◽  
Dianin's Compound

The crystal structure of the title compound has been determined by single crystal X-ray diffraction data collected at 293 K, and refined to a final Rw of 0.057. The crystals are rhombohedral, space group [Formula: see text], with a = 27.134(8) Å, c = 10.933(2) Å, and Z = 18. The mole ratio of Dianin's compound (4-p-hydroxyphenyl-2,2,4-trimethylchroman) to CCl4 is 6:1. The guest molecules are disordered. X-ray powder diffraction was carried out in the temperature range from 10 to 300 K. From this, the thermal expansion coefficients for the a- and c-axes and the volume have been determined. Keywords: thermal expansion, crystal structure, clathrate.

Structure and Thermal Expansion Behavior of Dy2-xGdxMo4O15 Solid Solution

2008 ◽  
Vol 368-372 ◽  
pp. 1665-1667
Author(s):  
M.M. Wu ◽  
X.L. Xiao ◽  
Y.Z. Cheng ◽  
J. Peng ◽  
D.F. Chen ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid Solution ◽  
Thermal Expansion ◽  
Monoclinic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Expansion Behavior ◽  
Expansion Coefficients ◽  
Cell Volumes

A new series of solid solutions Dy2-xGdxMo4O15 (x = 0.0-0.9) were prepared. These compounds all crystallize in monoclinic structure with space group P21/c. The lattice parameters a, b, c and unit cell volumes V increase almost linearly with increasing gadolinium content. The intrinsic thermal expansion coefficients of Dy2-xGdxMo4O15 (x = 0.0 and 0.25) were obtained in the temperature range of 25 to 500°C with high-temperature X-ray diffraction. The correlation between thermal expansion and crystal structure was discussed.

scholarly journals An examination of the thermal expansion of urea using high-resolution variable-temperature X-ray powder diffraction

2005 ◽  
Vol 38 (6) ◽  
pp. 1038-1039 ◽  
Author(s):  
Robert Hammond ◽  
Klimentina Pencheva ◽  
Kevin J. Roberts ◽  
Patricia Mougin ◽  
Derek Wilkinson
Keyword(s):  
Thermal Expansion ◽  
High Resolution ◽  
Variable Temperature ◽  
X Ray Diffraction ◽  
Polymorphic Transformations ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Cell Dimensions ◽  
Expansion Coefficients ◽  
Unit Cell Dimensions

Variable-temperature high-resolution capillary-mode powder X-ray diffraction is used to assess changes in unit-cell dimensions as a function of temperature over the range 188–328 K. No evidence was found for any polymorphic transformations over this temperature range and thermal expansion coefficients for urea were found to be αa= (5.27 ± 0.26) × 10−5 K−1and αc= (1.14 ± 0.057) × 10−5 K−1.

Thermal expansion coefficients and Gruneisen parameters of quartz at high temperature by X-ray method

1994 ◽  
Vol 9 (2) ◽  
pp. 148-150
Author(s):  
Nabil N. Rammo ◽  
Saad B. Farid
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Ambient Temperature ◽  
Least Squares ◽  
Temperature Variation ◽  
Ray Method ◽  
X Ray ◽  
Least Squares Fitting ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

The temperature variation of the interplanar spacings (101), (112), and (211) of 325 mesh quartz was determined in the range 300–966 °K using X-ray powder diffractometry. The measured lattice parameters have been found to increase nonlinearly with temperature, and the dependence has been expressed by a polynomial of second degree from the least-squares fitting of the data, the results of which are presented herein. Values are given for the thermal expansion coefficients and Gruneisen parameter in the range 300 to 768 °K. In the range 768–966 °K, the expansion is zero. The derivatives dαa/dT, dαc/dT, and dαv/dT at ambient temperature are also given.

Crystal structure and thermal expansion of hexakis(phenylthio)benzene and its CBr4 clathrate

1995 ◽  
Vol 73 (4) ◽  
pp. 513-521 ◽  
Author(s):  
Darek Michalski ◽  
Mary Anne White ◽  
Pradip K. Bakshi ◽  
T. Stanley Cameron ◽  
Ian Swainson
Keyword(s):  
Crystal Structure ◽  
Thermal Expansion ◽  
Neutron Powder Diffraction ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
Space Group ◽  
X Ray ◽  
Temperature Range ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

The crystal structures of hexakis(phenylthio)benzene (HPTB) and its CBr4 clathrate have been determined by single crystal X-ray diffraction data collected at T = 18 °C and refined to final Rw of 0.036 and 0.047, respectively. Pure HPTB is triclinic, space group [Formula: see text] (No. 2), with a = 9.589(2) Å, b = 10.256(1) Å, c = 10.645(2) Å, α = 68.42(1)°, β = 76.92(2)°, γ = 65.52(1)°, and Z = 1. The CBr4 clathrate of HPTB is rhombohedral, space group [Formula: see text] (No. 148), with a = 14.327(4) Å, b = 20.666(8) Å, and Z = 3. The host–guest mole ratio of HPTB–CBr4 is 1:2. Neutron powder diffraction was carried out on powders of both compounds in the temperature range 25 K < T < 295 K. Thermal expansion coefficients were determined for HPTB and HPTB–CBr4 over this temperature range. Keywords: thermal expansion, crystal structure, clathrate.

Behaviors of the Zr–1.0Sn–0.39Nb–0.31Fe–0.05Cr Alloy at High Temperature

2011 ◽  
Vol 399-401 ◽  
pp. 80-84
Author(s):  
Yi Yuan Tang ◽  
Jie Li Meng ◽  
Kai Lian Huang ◽  
Jian Lie Liang
Keyword(s):  
Thermal Expansion ◽  
Phase Transformation ◽  
High Temperature ◽  
Oxide Film ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thin Oxide Film ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

Phase transformation of the Zr-1.0Sn-0.39Nb-0.31Fe-0.05Cr alloy was investigated by high temperature X-ray diffraction (XRD). The XRD results revealed that the alloy contained two precipitates at room temperature, namely β-Nb and hexagonal Zr(Nb,Fe,Cr,)2. β-Nb was suggested to dissolve into the α-Zr matrix at the 580oC. Thin oxide film formed at the alloy’s surface was identified as mixture of the monoclinic Zr0.93O2and tetragonal ZrO2, when the temperature reached to 750oC and 850 oC. The thermal expansion coefficients of αZr in this alloy was of αa = 8.39×10-6/°C, αc = 2.48×10-6/°C.

A time-resolved x-ray diffraction study of Ti5Si3 product formation during combustion synthesis

1997 ◽  
Vol 12 (12) ◽  
pp. 3230-3240 ◽  
Author(s):  
C. R. Kachelmyer ◽  
I. O. Khomenko ◽  
A. S. Rogachev ◽  
A. Varma
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Product Formation ◽  
X Ray Diffraction ◽  
Temperature Synthesis ◽  
Time Resolved ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
High Temperature Synthesis ◽  
Expansion Coefficients

Time-resolved x-ray diffraction (TRXRD) was performed during Ti5Si3 synthesis by the self-propagating high-temperature synthesis mode for different Ti size fractions. It was determined that the time for product formation (ca. 15 s) was independent of Ti particle size. However, the formation of Ti5Si4 phase occurred when relatively large titanium particles were used. A simultaneous measurement of the temperature and TRXRD allowed us to attribute the shifting of XRD peaks at high temperature to thermal expansion of the Ti5Si3 product. The thermal expansion coefficients differ for different crystal planes, and their numerical values compare well with those reported previously in the literature.

Residual Stress in Two Dental Alloys During Porcelain Application

1987 ◽  
Vol 31 ◽  
pp. 255-260
Author(s):  
M. Bagby ◽  
SJ Marshall ◽  
GW Marshall
Keyword(s):  
Residual Stress ◽  
Thermal Expansion ◽  
Residual Stresses ◽  
Casting Process ◽  
Dental Alloys ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Expansion Coefficients ◽  
Dental Restorations ◽  
Expansion Coefficients

Residual stresses in dental castings are widely held to be the cause of distortion and change of fit in ceramic bonded to metal dental restorations. Residual stresses are thought to result from the casting process and from ceramic/metal mismatch of thermal expansion coefficients. Such stresses have not been confirmed experimentally. The purpose of this study was to measure residual stress with x-ray diffraction at the various porcelain application steps for two noble dental alloys with two dental opaque porcelains.

Sign in / Sign up

Export Citation Format

Share Document