In Vitro Cytotoxicity Study of the Nano-Hydroxyapatite/Bacterial Cellulose Nanocomposites

2009 ◽  
Vol 610-613 ◽  
pp. 1011-1016 ◽  
Author(s):  
Yan Mei Chen ◽  
Ting Fei Xi ◽  
Yu Dong Zheng ◽  
Yi Zao Wan
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bacterial Cellulose ◽  
Bone Tissue ◽  
Biological Response ◽  
Biological Properties ◽  
In Vitro Cytotoxicity ◽  
National Standard ◽  
Target Cells

The nanocomposite of nano-hydroxyapatite/bacterial cellulose (nHA/BC) obtained by depositing in simulated body fluid (SBF), incorporating their excellent mechanical and biological properties, is expected to have potential applications in bone tissue engineering. However, the biological response evaluation of biomaterials is required to provide useful information to improve their design and application. In this article, the in vitro cytotoxicity of composites nHA/BC as well as its degradation residues was studied. Scanning electron microscopy (SEM) was used to observe the morphology of original materials and their degradation residues. The degree of degradation was evalued by measuring the concentration of reducing sugar (glucose) by ultraviolet spectrophotometer. Bone-forming osteoblasts (OB) and infinite culture cell line L929 fibroblasts were used to measure the cytotocixity of materials with MTT assay. Both kinds of cells in infusion proliferate greatly in a normal form and their relative growth rate (RGR) exceeds by 75%, which shows the cytotoxicity of materials is graded as 0~1, according to the national standard. Nevertheless, bone-forming OB cells, as a kind of target cells, are more susceptive on the cytotoxicity than infinite culture fibroblast cells L929. The results suggest the nanocomposite of nHA/BC without cytotoxicity is greatly promising as a kind of scaffold materials for bone tissue engineering and tissue functional cells are more suited to evaluate the cytotoxicity of biomedical materials.

scholarly journals Cuttlefish Bone-Derived Biphasic Calcium Phosphate Scaffolds Coated with Sol-Gel Derived Bioactive Glass

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2711
Author(s):  
Ana S. Neto ◽  
Daniela Brazete ◽  
José M.F. Ferreira
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Calcium Phosphates ◽  
Sol Gel ◽  
Biological Properties ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
Hydrothermal Transformation

The combination of calcium phosphates with bioactive glasses (BG) has received an increased interest in the field of bone tissue engineering. In the present work, biphasic calcium phosphates (BCP) obtained by hydrothermal transformation of cuttlefish bone (CB) were coated with a Sr-, Mg- and Zn-doped sol-gel derived BG. The scaffolds were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. The initial CB structure was maintained after hydrothermal transformation (HT) and the scaffold functionalization did not jeopardize the internal structure. The results of the in-vitro bioactivity after immersing the BG coated scaffolds in simulated body fluid (SBF) for 15 days showed the formation of apatite on the surface of the scaffolds. Overall, the functionalized CB derived BCP scaffolds revealed promising properties, but further assessment of the in-vitro biological properties is needed before being considered for their use in bone tissue engineering applications.

Biological evaluation of micro-patterned hyaluronic acid hydrogel for bone tissue engineering

2014 ◽  
Vol 86 (12) ◽  
pp. 1911-1922 ◽  
Author(s):  
Hyo Seung Park ◽  
Su Yeon Lee ◽  
Hyunsik Yoon ◽  
Insup Noh
Keyword(s):  
Tissue Engineering ◽  
Hyaluronic Acid ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Cells ◽  
Cell Attachment ◽  
Biological Properties ◽  
Biological Evaluation ◽  
Micro Patterning

Abstract Design of micro-patterning of hydrogel is of critical importance in both understanding cellular behaviors and mimicking controlled microenvironments and architectures of diverse well-organized tissues. After micro-patterning of hyaluronic acid (HA) hydrogel on a poly(dimethyl siloxane) substrate, its physical and biological properties have been compared with those of a non-patterned hydrogel for its possible applications in bone tissue engineering. The micro-patterned morphologies of HA hydrogel in both swollen and dehydrated forms have been observed with light microscope and scanning electron microscope, respectively, before and after in vitro cell culture. When MC3T3 bone cells were in vitro cultured on both HA hydrogels, the micro-patterned one shows excellence in cell proliferation and lining for 7 days along the micro-pattern paths over those of the non-patterned one, which have shown less cell-adhesiveness. The cytotoxicity of the micro-patterned HA hydrogels was in vitro evaluated by the assays of MTT, BrdU and Neutral red. The viability and morphology of MC3T3 cells on both HA hydrogels were observed with a fluorescence microscope by the live & dead assay, where their viability was confirmed by staining of F-actin development. The results of their H&E staining showed that both micro-patterned and non-patterned hydrogels induced development of tissue regeneration as observed by cell attachment, proliferation, and survivability, but the micro-patterned one induced distinctive patterning of both better initial cells adhesion on the micro-patterns and subsequently development of their proliferation and extracellular matrix, which were considered as important characteristics in their applications to tissue engineering.

Porous Hydroxyapatite/Chitosan/Carboxymethyl Cellulose Scaffolds with Tunable Microstructures for Bone Tissue Engineering

2019 ◽  
Vol 819 ◽  
pp. 9-14 ◽  
Author(s):  
Kanharit Wongsawichai ◽  
Arada Kingkaew ◽  
Aninart Pariyaisut ◽  
Supang Khondee
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Carboxymethyl Cellulose ◽  
Cell Attachment ◽  
Biological Properties ◽  
Porous Hydroxyapatite ◽  
Porous Microstructure

Bone tissue engineering is an alternative approach to generate bone using biomaterials and cells. Hydroxyapatite (HA) has good biocompatibility, osteoinductivity, and osteoconductivity. However, it has limited utility due to poor mechanical properties and slow degradation rate. To improve mechanical properties and to modify degradation profile, hydroxyapatite was tethered in chitosan (CS) and carboxymethyl cellulose (CMC) complex. Gelatin was incorporated to promote cell attachment and polyvinyl alcohol (PVA) was used to improve mechanical strength of this scaffold. The physico-mechanical and biological properties of these scaffolds were investigated. Fourier transform infrared (FTIR) analysis and X-ray diffraction (XRD) showed the incorporation of hydroxyapatite in polymer matrix. The scaffolds had density, compressive strength, and Young’s modulus in the range of 0.24-0.30 g/cm3, 0.028-0.035 MPa, 0.178-0.560 MPa, respectively. The scaffolds had porosity of 69-91 percent. Higher content of PVA decreased porosity of scaffolds. Scanning electron microscope showed porous microstructure with pore size in the range of 60-183 μm. In vitro test on MC3T3-E1 preosteoblast cells showed negligible cytotoxicity of scaffolds. The data suggested that HA/CS/CMC/gelatin/PVA scaffold has potential applications in bone tissue engineering.

Characterization and in vitro evaluation of bacterial cellulose membranes functionalized with osteogenic growth peptide for bone tissue engineering

2012 ◽  
Vol 23 (9) ◽  
pp. 2253-2266 ◽  
Author(s):  
Sybele Saska ◽  
Raquel Mantuaneli Scarel-Caminaga ◽  
Lucas Novaes Teixeira ◽  
Leonardo Pereira Franchi ◽  
Raquel Alves dos Santos ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bacterial Cellulose ◽  
Bone Tissue ◽  
In Vitro Evaluation ◽  
Cellulose Membranes

scholarly journals 3D Printing of Polycaprolactone–Polyaniline Electroactive Scaffolds for Bone Tissue Engineering

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 512 ◽  
Author(s):  
Arie Wibowo ◽  
Cian Vyas ◽  
Glen Cooper ◽  
Fitriyatul Qulub ◽  
Rochim Suratman ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Cell Viability ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Polymeric Composite ◽  
Biological Properties ◽  
Initial Development ◽  
Cellular Behaviour

Electrostimulation and electroactive scaffolds can positively influence and guide cellular behaviour and thus has been garnering interest as a key tissue engineering strategy. The development of conducting polymers such as polyaniline enables the fabrication of conductive polymeric composite scaffolds. In this study, we report on the initial development of a polycaprolactone scaffold incorporating different weight loadings of a polyaniline microparticle filler. The scaffolds are fabricated using screw-assisted extrusion-based 3D printing and are characterised for their morphological, mechanical, conductivity, and preliminary biological properties. The conductivity of the polycaprolactone scaffolds increases with the inclusion of polyaniline. The in vitro cytocompatibility of the scaffolds was assessed using human adipose-derived stem cells to determine cell viability and proliferation up to 21 days. A cytotoxicity threshold was reached at 1% wt. polyaniline loading. Scaffolds with 0.1% wt. polyaniline showed suitable compressive strength (6.45 ± 0.16 MPa) and conductivity (2.46 ± 0.65 × 10−4 S/cm) for bone tissue engineering applications and demonstrated the highest cell viability at day 1 (88%) with cytocompatibility for up to 21 days in cell culture.

Diels–Alder functionalized carbon nanotubes for bone tissue engineering: in vitro/in vivo biocompatibility and biodegradability

Nanoscale ◽  
2015 ◽  
Vol 7 (20) ◽  
pp. 9238-9251 ◽  
Author(s):  
D. Mata ◽  
M. Amaral ◽  
A. J. S. Fernandes ◽  
B. Colaço ◽  
A. Gama ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biological Response ◽  
Diels Alder ◽  
Functionalized Carbon Nanotubes

Diels–Alder functionalization accounts for the improved CNT biological response in terms of biocompatibility and biodegradability profiles.

scholarly journals Graphene and its Derivatives for Bone Tissue Engineering: In Vitro and In Vivo Evaluation of Graphene-Based Scaffolds, Membranes and Coatings

2021 ◽  
Vol 9 ◽  
Author(s):  
Junyao Cheng ◽  
Jianheng Liu ◽  
Bing Wu ◽  
Zhongyang Liu ◽  
Ming Li ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Regenerative Medicine ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Bone Grafts ◽  
Biological Properties ◽  
In Vivo Evaluation

Bone regeneration or replacement has been proved to be one of the most effective methods available for the treatment of bone defects caused by different musculoskeletal disorders. However, the great contradiction between the large demand for clinical therapies and the insufficiency and deficiency of natural bone grafts has led to an urgent need for the development of synthetic bone graft substitutes. Bone tissue engineering has shown great potential in the construction of desired bone grafts, despite the many challenges that remain to be faced before safe and reliable clinical applications can be achieved. Graphene, with outstanding physical, chemical and biological properties, is considered a highly promising material for ideal bone regeneration and has attracted broad attention. In this review, we provide an introduction to the properties of graphene and its derivatives. In addition, based on the analysis of bone regeneration processes, interesting findings of graphene-based materials in bone regenerative medicine are analyzed, with special emphasis on their applications as scaffolds, membranes, and coatings in bone tissue engineering. Finally, the advantages, challenges, and future prospects of their application in bone regenerative medicine are discussed.

PLGA+HA/βTCP scaffold incorporating simvastatin: a promising biomaterial for bone tissue engineering

2020 ◽  
Author(s):  
Mariane Beatriz Sordi ◽  
Ariadne Cristiane Cabral da Cruz ◽  
Águedo Aragones ◽  
Mabel Mariela Rodríguez Cordeiro ◽  
Ricardo de Souza Magini
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Thermal Analyses ◽  
Chemical Properties ◽  
Biological Properties ◽  
Scanning Calorimetry ◽  
Evaporation Technique ◽  
Porosity Analysis ◽  
Biphasic Ceramic

The aim of this study was to synthesize, characterize, and evaluate degradation and biocompatibility of poly(lactic-co-glycolic acid) + hydroxyapatite / β-tricalcium phosphate (PLGA+HA/βTCP) scaffolds incorporating simvastatin (SIM) to verify if this biomaterial might be promising for bone tissue engineering. Samples were obtained by the solvent evaporation technique. Biphasic ceramic particles (70% HA, 30% βTCP) were added to PLGA in a ratio of 1:1. Samples with SIM received 1% (m:m) of this medication. Scaffolds were synthesized in a cylindric-shape and sterilized by ethylene oxide. For degradation analysis, samples were immersed in PBS at 37 °C under constant stirring for 7, 14, 21, and 28 days. Non-degraded samples were taken as reference. Mass variation, scanning electron microscopy, porosity analysis, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetry were performed to evaluate physico-chemical properties. Wettability and cytotoxicity tests were conducted to evaluate the biocompatibility. Microscopic images revealed the presence of macro, meso, and micropores in the polymer structure with HA/βTCP particles homogeneously dispersed. Chemical and thermal analyses presented very similar results for both PLGA+HA/βTCP and PLGA+HA/βTCP+SIM. The incorporation of simvastatin improved the hydrophilicity of scaffolds. Additionally, PLGA+HA/βTCP and PLGA+HA/βTCP+SIM scaffolds were biocompatible for osteoblasts and mesenchymal stem cells. In summary, PLGA+HA/βTCP scaffolds incorporating simvastatin presented adequate structural, chemical, thermal, and biological properties for bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document