The Effect of Regeneration Conditions on the Properties of CeO2 Desulfurization Sorbent in SO2 Atmosphere

2017 ◽  
Vol 896 ◽  
pp. 155-161
Author(s):  
Lei Yang ◽  
Shang Guan Ju ◽  
Hui Qing Wang ◽  
Jia An ◽  
Jun Ming Yu ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Elemental Sulfur ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
X Ray Diffraction ◽  
X Ray ◽  
Before And After ◽  
Regeneration Condition ◽  
Main Components ◽  
Scanning Electron

CeO2 desulfurization sorbent was prepared by calcination of Ce(NO3)3 ● 6H2O and the effect of regeneration conditions on its properties in SO2 atmosphere was investigated in a fixed bed reactor. The regeneration conversion and the yield of elemental sulfur for CeO2 desulfurization sorbent were tested and calculated. And the composition and the morphology of CeO2 desulfurization sorbent before and after regeneration were obtained by X-ray diffraction and scanning electron microscope. It was found that the main components of the regeneration products of Ce2O desulfurization sorbent were solid CeO2 and gaseous elemental S in SO2 atmosphere. The optimum regeneration condition of CeO2 desulfurization sorbent is that the regeneration temperature of 750 °C and the SO2 concentration of 4.25 %, under which the CeO2 desulfurization sorbent shows the higher regeneration conversion of 96 % and the yield of elemental sulfur of 68.95 wt. %.

scholarly journals The Comparative PDT Experiment of the Inactivation of HL60 on Modified TiO2Nanoparticles

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Kaiqi Lu ◽  
Qiyun He ◽  
Li Chen ◽  
Baoquan Ai ◽  
Jianwen Xiong
Keyword(s):  
Electron Microscope ◽  
Leukemia Cells ◽  
X Ray Diffraction ◽  
Sem Images ◽  
X Ray ◽  
Ultrasonic Methods ◽  
Photocatalytic Inactivation ◽  
Before And After ◽  
Inactivation Effect ◽  
Scanning Electron

Four samples of modified titanium dioxide (TiO2), Fe/TiO2(2 wt%), Fe/TiO2(5 wt%), and 5-ALA/TiO2, were experimented in photodynamic therapy (PDT) on leukemia cells HL60, performing promising photocatalytic inactivation effect. Fe/TiO2and 5-ALA/TiO2were synthesized in methods of precipitation and ultrasonic methods, respectively. X-ray diffraction spectra and UV-Vis spectra were studied for the samples’ crystalline phase and redshift of absorption peak. Further, FTIR spectra and Raman spectra were obtained to examine the combination of 5-aminolevulinic (5-ALA) and TiO2nanoparticles. The toxicity of these four kinds of nanoparticles was studied through darkroom experiments. And based on the concentration which caused the same toxic effect (90%) on HL60, PDT experiments of TiO2, Fe/TiO2(2%), Fe/TiO2(5%), and ALA/TiO2were done, resulting in the fact that the photokilling efficiency was 69.7%, 71.6%, 72%, and 80.6%, respectively. Scanning electron microscope (SEM) images of the samples were also taken to study the morphology of HL60 cells before and after PDT, resulting in the fact the activation of the modified TiO2from PDT was the main cause of cell apoptosis.

The Regeneration Properties of Manganese Oxide Sorbent under SO2 Atmosphere

2016 ◽  
Vol 859 ◽  
pp. 140-145 ◽  
Author(s):  
Hui Qing Wang ◽  
Shang Guan Ju ◽  
Li Ping Liu ◽  
Xiao Wei Zhao ◽  
Jie Mi
Keyword(s):  
Manganese Oxide ◽  
Photoelectron Spectroscopy ◽  
Elemental Sulfur ◽  
Fixed Bed ◽  
Fixed Bed Reactor ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Value ◽  
Regeneration Mechanism ◽  
Effects Of Temperature

The effects of temperature and concentration of sulfur dioxide on regeneration behavior of manganese oxide sorbent were studied in a fixed-bed reactor. The sorbents were characterized by X-ray diffraction and X-ray photoelectron spectroscopy. Subsequently, the regeneration mechanism was inferred and the yield of export elemental sulfur was calculated. The study shows that, the major regeneration products are Mn3O4, MnSO4 and a small amount of elemental sulfur under SO2 atmosphere.The sulfate can be converted to Mn3O4and Mn2O3 at 800 °C under N2 atmosphere. The elemental sulfur productivity increases with the increase of temperature and concentration of sulfur dioxide.The regeneration conversion attains maximum value (68%) at 800 °C under the atmosphere of 1.68% SO2, and the productivity of elemental sulfur reaches to maximum value (29%) under the conditions.

Epitaxy in the Crystallization of Feldspar Gels and Glasses

1994 ◽  
Vol 346 ◽  
Author(s):  
Chunling Liu ◽  
Sridhar Komarneni ◽  
Rustum Roy
Keyword(s):  
Electron Microscope ◽  
Energy Dispersive Spectrometry ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Crystallization Product ◽  
X Ray ◽  
Seeding Effect ◽  
Before And After ◽  
Scanning Electron

ABSTRACTThe crystallization behaviors of stoichiometric feldspar gels and glasses before and after seeding have been compared, and the role of epitaxy in their crystallization upon seeding has been studied. The crystallization products were mainly determined by X-ray diffraction (XRD) analysis and epitaxy upon seeding was examined with a scanning electron microscope (SEM), and energy dispersive spectrometry (EDS). It was found that upon isostructural seeding, Na-and K-feldspars crystallized epitaxially from their gels and/or glasses. Little or no seeding effect was found in CaAl2Si2O8 and SrAl2Si2O8 gels and glasses. Isostructural seeding in BaAl2Si2O8 gels increased the formation of Ba-feldspar (monoclinic celsian) epitaxially, whereas without seeding hexacelsian was the crystallization product.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

Effect of the Neodymium Content on Mechanical Properties of the Electro-Brush Plated Nano-Al2O3/Ni Composite Coating

2012 ◽  
Vol 525-526 ◽  
pp. 277-280
Author(s):  
Guo Jin ◽  
Xiu Fang Cui ◽  
Er Bao Liu ◽  
Qing Fen Li
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Composite Coating ◽  
Nanoindentation Test ◽  
X Ray Diffraction ◽  
X Ray ◽  
Small Cracks ◽  
Scanning Electron

The effect of the neodymium content on mechanical properties of the electro-brush plated nanoAl2O3/Ni composite coating was investigated in this paper. The microstructure and phase structure were studied with scanning electron microscope (SEM) and X-ray diffraction (XRD). The hardness and abrasion properties of several coatings with different neodymium content were studied by nanoindentation test and friction / wear experiment. Results show that the coatings are much finer and more compact when the neodymium was added, and the hardness and abrasion property of the coatings with neodymium were improved obviously. Besides, the small cracks conduced by the upgrowth stress in the coatings were ameliorated when the rare earth neodymium was added. The improvement mechanism was further discussed.

Effect of Briquetting Pressure on the Performance of In Situ Formed Sialon in Al2O3-C Refractory Bricks

2014 ◽  
Vol 881-883 ◽  
pp. 1049-1052 ◽  
Author(s):  
Nai Peng ◽  
Cheng Ji Deng ◽  
Hong Xi Zhu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Z Value ◽  
Refractory Bricks ◽  
Scanning Electron

In this paper, the effects of briquetting pressure on the performance of in-situ formed Sialon in Al2O3-C refractory bricks are investigated. The phase compositions and microstructure of the Al2O3-C refractory were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM).The results show the briquetting pressure hardly has effect on the phase of the sintered specimens, two new phases of Sialon with a Z value of 2 and SiC formed. The micrographs of Sialon crystals have the shape of both column and tabular column, but with a cone tip in the specimens sintered at 200MPa and 300MPa and smooth tip in specimens sintered at 400MPa and 500MPa.

Solvothermal Synthesis of Bi2Se3 Hexagonal Nanosheet Crystals

2011 ◽  
Vol 236-238 ◽  
pp. 1712-1716 ◽  
Author(s):  
Hai Tao Liu ◽  
Jun Dai ◽  
Jia Jia Zhang ◽  
Wei Dong Xiang
Keyword(s):  
Electron Microscope ◽  
Solvothermal Synthesis ◽  
Solvothermal Method ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

Bismuth selenide (Bi2Se3) hexagonal nanosheet crystals with uniform size were successfully prepared via a solvothermal method at 160°C for 22 h using bismuth trichloride(BiCl3) and selenium powder(Se) as raw materials, sodium bisulfite(NaHSO3) as a reducing agent, diethylene glycol(DEG) as solvent, and ammonia as pH regulator. Various techniques such as X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), and selected area electron diffraction (SAED) were used to characterize the obtained products. Results show that the as-synthesized samples are pure Bi2Se3 hexagonal nanosheet crystals. A possible growth mechanism for Bi2Se3 hexagonal nanosheet crystals is also discussed based on the experiment.

Effect of P2O5 on the Properties of Alite-Calcium Strontium Sulphoaluminate Cement

2011 ◽  
Vol 306-307 ◽  
pp. 961-965
Author(s):  
Chao Nan Yin ◽  
Ling Chao Lu ◽  
Shou De Wang
Keyword(s):  
Compressive Strength ◽  
Electron Microscope ◽  
Heat Evolution ◽  
Petrographic Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sulphoaluminate Cement ◽  
Suitable Amount ◽  
Acceleration Period ◽  
Scanning Electron

The influence of P2O5on the properties of alite-calcium strontium sulphoaluminate cement was researched by means of X-ray diffraction, scanning electron microscope-energy dispersive spectroscopy (SEM-EDS) and petrographic analysis. The results show that the optimal content of P2O5is 0.3% and the compressive strength of the cement at 1, 3, 28d are 27.0, 59.1, 110.9MPa when the calcining temperature is 1350°C. P2O5mainly exists in the belite and a suitable amount of P2O5can promote the formation of C1.5Sr2.5A3and alite. When the content of P2O5is higher than 0.3%, the formation of C1.5Sr2.5A3and alite can be hindered. P2O5can enhance the hydration heat evolution rate in the acceleration period and the hydrate heat of cement containing P2O5increases slightly.

Effect of Nickel on Titanium Carbide Synthesized via Tungsten Inert Gas (TIG) Method

2012 ◽  
Vol 620 ◽  
pp. 384-388
Author(s):  
Sharifah Aishah Syed Salim ◽  
Julie Juliewatty Mohamed ◽  
Zainal Arifin Ahmad ◽  
Zainal Arifin Ahmad
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Powder Mixture ◽  
Raw Material ◽  
Inert Gas ◽  
X Ray Diffraction ◽  
X Ray ◽  
Arc Melting ◽  
Elemental Powder Mixture ◽  
Scanning Electron

Numerous methods have been used to produce high purity TiC. There is no previous study has been reported on the formation using single elemental powders of Titanium (Ti) and Carbon (C) with addition Nickel (Ni) by tungsten inert gas (TIG) weld method. In this work, TiC was synthesized via TIG method by arc melting elemental powder mixture of Ti and C at ~5 second (s) and 80 ampere (A). The effect Ni contents on TiC formation was investigated. The mixed raw material was ball milled for 24 hours followed by synthesis via TIG method. The arced samples were characterized by X-ray diffraction (XRD) and Scanning electron microscope (SEM). It was revealed, that small amount of Ni additive to the metal powder allows the production of dense and tough TiC.

scholarly journals Supplementary X-ray studies of the Ni-Sn-Bi system

2007 ◽  
Vol 43 (2) ◽  
pp. 141-150 ◽  
Author(s):  
G.P. Vassilev ◽  
K.I. Lilova ◽  
J.C. Gachon
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Phase Equilibria ◽  
Ternary Compound ◽  
Approximate Formula ◽  
Ternary Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Peaks ◽  
Scanning Electron

Phase equilibria were studied in the system Ni-Sn-Bi. Special attention has been paid to the identification of the recently found ternary phase. For this purpose samples were synthesized using intimately mixed powders. After annealing and quenching, all alloys were analyzed by scanning electron microscope and by X-ray diffraction. The results give evidences about the existence of a ternary compound with approximate formula Ni6Sn2Bi to Ni7Sn2Bi. Overlapping of some neighboring diffraction peaks of this phase with NiBi and Ni3Sn_LT is the reason for the difficulties related to the X-ray diffraction identification of the ternary phase.

Sign in / Sign up

Export Citation Format

Share Document