Analysis of Weld Cracking in a Low-Pressure Steam Pipe
A weld cracking of the outlet pipe occurred during the operation of a low-pressure steam super-heater in the purification device. It was found that many cracks were perpendicular to the weld, which affected the equipment safe operation. In order to investigate the failure cause, the samples containing weld and cracks in the outlet pipe were cut. The experiments, including chemical composition analysis, mechanical properties testing, scanning electron microscope observation, energy spectrum analysis and metallographic analysis, were performed. The results showed that the corrosion products had loose structure, mainly consisting of iron, sodium and phosphorus oxides. The metallographic results of the fracture section indicated that there existed a mixed cracks of trans-granular and inter-granular mode, along with stepped crack characteristics. Therefore, it is believed that the weld transverse cracking in the outlet pipe may be resulted by both of alkali stress corrosion cracking and the hydrogen induced cracking. According to the failure cause analysis, the corresponding suggestions are given, such as welding, operation process and inspection.