scholarly journals DEVELOPMENT OF SPECTROPHOTOMETRIC METHOD FOR THE DETERMINATION OF PERINDOPRIL ERBUMINE IN PHARMACEUTICAL FORMULATIONS USING 2, 4 DINITROFLUOROBENZENE

2012 ◽  
Vol 57 (2) ◽  
pp. 1069-1073 ◽  
Author(s):  
NAFISUR RAHMAN ◽  
HABIBUR RAHMAN ◽  
ASMA KHATOON
Author(s):  
Mouhammed Khateeb ◽  
Basheer Elias ◽  
Fatema Al Rahal

A simple and sensitive kinetic spectrophotometric method has been developed for the determination of folic acid (FA) in bulk and pharmaceutical Formulations. The method is based on the oxidation of FA by Fe (III) in sulfuric acid medium. Fe (III) subsequently reduces to Fe (II) which is coupled with potassium ferricyanide to form Prussian blue. The reaction is followed spectrophotometrically by measuring the increase in absorbance at λmax 725 nm. The rate data and fixed time methods were adopted for constructing the calibration curves. The linearity range was found to be 1–20 μg mL-1 for each method. The correlation coefficient was 0.9978 and 0.9993, and LOD was found to be 0.91 and 0.09 μg mL-1 for rate data and fixed time methods, respectively. The proposed method has been successfully applied to the determination of FA in formulations with no interference from the excipients. Statical comparison of the results shows that there is no significant difference between the proposed and pharmacopoeial methods


2017 ◽  
Vol 9 (5) ◽  
pp. 102
Author(s):  
Sukhjinder Kaur ◽  
Taranjit Kaur ◽  
Gurdeep Kaur ◽  
Shivani Verma

Objective: The aim of the present work was to develop a simple, rapid, accurate and economical UV-visible spectrophotometric method for the determination of hydroquinone (HQ) in its pure form, marketed formulation as well as in the prepared nanostructured lipid carrier (NLC) systems and to validate the developed method.Methods: HQ was estimated at UV maxima of 289.6 nm in pH 5.5 phosphate buffer using UV-Visible double beam spectrophotometer. Following the guidelines of the International Conference on Harmonization (ICH), the method was validated for various analytical parameters like linearity, precision, and accuracy robustness, ruggedness, limit of detection, quantification limit, and formulation analysis.Results: The obtained results of the analysis were validated statistically. Recovery studies were performed to confirm the accuracy of the proposed method. In the developed method, linearity over the concentration range of 5-40 μg/ml of HQ was observed with the correlation coefficient of 0.998 and found in good agreement with Beer Lambert’s law. The precision (intra-day and inter-day) of the method was found within official RCD limits (RSD<2%).Conclusion: The sensitivity of the method was assessed by determining the limit of detection and limit of quantification. It could be concluded from the results obtained that the purposed method for estimation of HQ in pure form, in the marketed ointment and in the prepared NLC-formulation was simple, rapid, accurate, precise and economical. It can be used successfully in the quality control of pharmaceutical formulations and for the routine laboratory analysis.


2013 ◽  
Vol 10 (3) ◽  
pp. 965-970
Author(s):  
Baghdad Science Journal

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of captopril in aqueous solution. The method is based on reaction of captopril with 2,3-dichloro 1,4- naphthoquinon(Dichlone) in neutral medium to form a stable yellow colored product which shows maximum absorption at 347 nm with molar absorptivity of 5.6 ×103 L.mole-1. cm-1. The proposed method is applied successfully for determination of captopril in commercial pharmaceutical tablets.


2008 ◽  
Vol 33 (3) ◽  
pp. 7-12 ◽  
Author(s):  
M. A. Gotardo ◽  
L. S. Lima ◽  
R. Sequinel ◽  
J. L. Rufino ◽  
L. Pezza ◽  
...  

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of methyldopa in pharmaceutical formulations. The method is based on the reaction between tetrachloro-p-benzoquinone (p-chloranil) and methyldopa, accelerated by hydrogen peroxide (H2O2), producing a violet-red compound (λmax = 535 nm) at ambient temperature (25.0 ± 0.2 ºC). Experimental design methodologies were used to optimize the measurement conditions. Beer's law is obeyed in a concentration range from 2.10 x 10-4 to 2.48 x 10-3 mol L-1 (r = 0.9997). The limit of detection was 7.55 x 10-6 mol L-1 and the limit of quantification was 2.52 x 10-5 mol L-1. The intraday precision and interday precision were studied for 10 replicate analyses of 1.59 x 10-3 mol L-1 methyldopa solution and the respective coefficients of variation were 0.7 and 1.1 %. The proposed method was successfully applied to the determination of methyldopa in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the Brazilian Pharmacopoeia procedure at 95 % confidence level.


Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.


Author(s):  
SMITA KUMBHAR ◽  
VINOD MATOLE ◽  
YOGESH THORAT ◽  
ANITA SHEGAONKAR ◽  
AVINASH HOSMANI

Objective: A new, simple, sensitive, precise and reproducible UV visible spectrophotometric method was developed for the determination of Imatinib in pharmaceutical formulations with alizarin. Methods: The method is based on formation of yellow-colored complex. The UV spectrum of Imatinib in methanol showed λ max at 431 nm. Beer’s law is valid in the concentration range of 10-70 μg/ml. This method was validated for linearity, accuracy, precision, ruggedness and robustness. Results: The method has demonstrated excellent linearity over the range of 10-70 μg/ml with regression equation y =0.013x-0.017 and regression correlation coefficient r2= 0.997. Moreover, the method was found to be highly sensitive with LOD (4.3μg/ml) and LOQ (13.07μg/ml). Conclusion: Based on results the proposed method can be successfully applied for the assay of Imatinib in various pharmaceutical dosage forms.


2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Kumble Divya ◽  
Badiadka Narayana ◽  
Majal Sapnakumari

A new spectrophotometric method is developed for the determination of Paracetamol (PCT) and protriptyline HCl (PTP) in pure forms and in pharmaceutical formulations. The experiment involves the use of 3-chloro-7-hydroxy-4-methyl-2H-chromen-2-one as a novel chromogenic reagent for the determination of PCT and PTP. The method is based on the formation of charge transfer complex between the drugs and chromogenic reagent. Beer's law is obeyed in the concentration ranges 10.00–60.00 µg mL−1 for PCT at 545 nm and 40.00–160.00 µg mL−1 for PTP at 468 nm. The molar absorptivity, Sandell, sensitivity, and limit of detection and quantification are also calculated. The method has been successfully applied for the determination of both PCT and PTP in pharmaceutical samples with acceptable results.


Sign in / Sign up

Export Citation Format

Share Document