CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing

2011 ◽  
Vol 2011 (1) ◽  
pp. 001021-001027 ◽  
Author(s):  
Cassie Gutierrez ◽  
Rudy Salas ◽  
Gustavo Hernandez ◽  
Dan Muse ◽  
Richard Olivas ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Printed Circuit Boards ◽  
Fused Deposition Modeling ◽  
Integrated Approach ◽  
Layer By Layer ◽  
New Paradigm ◽  
Spatial Gradients ◽  
Fused Deposition ◽  
On Demand

Fabricating entire systems with both electrical and mechanical content through on-demand 3D printing is the future for high value manufacturing. In this new paradigm, conformal and complex shapes with a diversity of materials in spatial gradients can be built layer-by-layer using hybrid Additive Manufacturing (AM). A design can be conceived in Computer Aided Design (CAD) and printed on-demand. This new integrated approach enables the fabrication of sophisticated electronics in mechanical structures by avoiding the restrictions of traditional fabrication techniques, which result in stiff, two dimensional printed circuit boards (PCB) fabricated using many disparate and wasteful processes. The integration of Additive Manufacturing (AM) combined with Direct Print (DP) micro-dispensing and robotic pick-and-place for component placement can 1) provide the capability to print-on-demand fabrication, 2) enable the use of micron-resolution cavities for press fitting electronic components and 3) integrate conductive traces for electrical interconnect between components. The fabrication freedom introduced by AM techniques such as stereolithography (SL), ultrasonic consolidation (UC), and fused deposition modeling (FDM) have only recently been explored in the context of electronics integration and 3D packaging. This paper describes a process that provides a novel approach for the fabrication of stiff conformal structures with integrated electronics and describes a prototype demonstration: a volumetrically-efficient sensor and microcontroller subsystem scheduled to launch in a CubeSat designed with the CubeFlow methodology.

Carbon Nanotube Reinforced Fused Deposition Modeling Using Microwave Irradiation

2016 ◽  
Author(s):  
Meng Zhang ◽  
Xiaoxu Song ◽  
Weston Grove ◽  
Emmett Hull ◽  
Z. J. Pei ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Additive Manufacturing ◽  
Microwave Irradiation ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Sem Images ◽  
Fused Deposition ◽  
Deposition Modeling

Additive manufacturing (AM) is a class of manufacturing processes where material is deposited in a layer-by-layer fashion to fabricate a three-dimensional part directly from a computer-aided design model. With a current market share of 44%, thermoplastic-based additive manufacturing such as fused deposition modeling (FDM) is a prevailing technology. A key challenge for AM parts (especially for parts made by FDM) in engineering applications is the weak inter-layer adhesion. The lack of bonding between filaments usually results in delamination and mechanical failure. To address this challenge, this study embedded carbon nanotubes into acrylonitrile butadiene styrene (ABS) thermoplastics via a filament extrusion process. The vigorous response of carbon nanotubes to microwave irradiation, leading to the release of a large amount of heat, is used to melt the ABS thermoplastic matrix adjacent to carbon nanotubes within a very short time period. This treatment is found to enhance the inter-layer adhesion without bulk heating to deform the 3D printed parts. Tensile and flexural tests were performed to evaluation the effects of microwave irradiation on mechanical properties of the specimens made by FDM. Scanning electron microscopic (SEM) images were taken to characterize the fracture surfaces of tensile test specimens. The actual carbon nanotube contents in the filaments were measured by conducting thermogravimetric analysis (TGA). The effects of microwave irradiation on the electrical resistivity of the filament were also reported.

Effects of Process Variables on Extrusion of Carbon Fiber Reinforced ABS Filament for Additive Manufacturing

2015 ◽  
Author(s):  
Emmett Hull ◽  
Weston Grove ◽  
Meng Zhang ◽  
Xiaoxu Song ◽  
Z. J. Pei ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Carbon Fiber ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Fiber Reinforced ◽  
Process Variables ◽  
Fused Deposition ◽  
3D Printers ◽  
Carbon Fiber Reinforced

Additive manufacturing (3D printing) is a class of manufacturing processes where material is deposited in a layer-by-layer fashion to fabricate a three-dimensional part directly from a computer-aided design (CAD) model. With a current market share of 44%, thermoplastic-based additive manufacturing such as fused deposition modeling (FDM) is a prevailing technology. A preliminary extrusion process is required to produce thermoplastic filaments for use in FDM 3D printers. It is crucial that extruded filament must have constant dimensional accuracy for FDM 3D printers to produce the desired object with precision. In this study, carbon fibers were blended with acrylonitrile butadiene styrene (ABS) thermoplastics to produce carbon fiber reinforced ABS filaments in order to improve the mechanical properties of FDM-printed objects. During filament extrusion, three process variables showed significant effects on filament diameter, expansion percentage, and extrusion rate. These process variables included carbon fiber content, extrusion temperature, and nozzle size. The objective of this study is to test the feasible ranges of these process variables and to investigate their effects on filament extrusion. Results of this study will provide knowledge on quality improvement of carbon fiber reinforced ABS filament extrusion for additive manufacturing.

scholarly journals Desain dan Pembuatan Prototype Piston Honda MEGAPRO FI Menggunakan 3D Printing

2020 ◽  
Vol 1 (2) ◽  
pp. 81-91
Author(s):  
Frince Marbun ◽  
Richard A.M. Napitupulu
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Layer By Layer ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Manufacturing Technologies ◽  
Aided Design

3D printing technology has great potential in today's manufacturing world, one of its uses is in making miniatures or prototypes of a product such as a piston. One of the most famous and inexpensive 3D printing (additive manufacturing) technologies is Fused Deposition Modeling (FDM), the principle FDM works by thermoplastic extrusion through a hot nozzle at melting temperature then the product is made layer by layer. The two most commonly used materials are ABS and PLA so it is very important to know the accuracy of product dimensions. FDM 3D Printing Technology is able to make duplicate products accurately using PLA material. FDM machines work by printing parts that have been designed by computer-aided design (CAD) and then exported in the form of STL or .stl files and uploaded to the slicer program to govern the printing press according to the design. Using Anet A8 brand 3D printing tools that are available to the public, Slicing of general CAD geometry files such as autocad and solidwork is the basis for making this object. This software is very important to facilitate the design process to be printed. Some examples of software that can be downloaded and used free of charge such as Repetier-Host and Cura. by changing the parameters in the slicer software is very influential in the 3D printing manufacturing process.

scholarly journals Development of flotation machine impeller on the base of additive technologies

2021 ◽  
Vol 64 (5) ◽  
pp. 366-373
Author(s):  
L. V. Sedykh ◽  
P. V. Borisov ◽  
A. N. Pashkov ◽  
N. V. Gorbatyuk ◽  
R. Yu. Surkova ◽  
...  
Keyword(s):  
Technological Process ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Low Cost ◽  
Additive Technologies ◽  
Design System ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Foam Flotation ◽  
Flotation Machines

The constant increase in the consumption of ferrous, non-ferrous, precious and rare metals in the national economy requires an increase in the efficiency of minerals mining and processing. One of the main methods of enrichment used in the technological process of processing various ores is foam flotation. The authors provide a brief description of this process and analysis of various designs of flotation machines. The article is devoted to the modernization of the aeration unit of flotation machines with “RIF” design. It is noted that the design of such machines effectively uses the modular principle of assembly aggregates, which allows you to upgrade individual unit, increasing the efficiency of the machine as a whole. The main part of this unit is an impeller – the most complex and fast – wearing part. The paper analyzes various designs of impellers and their manufacturing technologies. It is noted that in the existing designs of flotation machines, the impellers are made of steel. It is proposed to replace this material with polyurethane, which has become widely used as a structural material due to the emergence of additive technologies in the production of various parts. This material has a relatively low cost and has an increased resistance to wear. The article formulates the main requirements for the most important operations of the technological process of impeller manufacturing. For this purpose, a 3D model of the upgraded impeller design was developed in the SolidWorks 3D computer-aided design system. The authors propose an additive technology for layer-by-layer production of an impeller on a 3D printer using the Ultimaker Cura slicer program. For the manufacture of the proposed design of the impeller made of polyurethane, the production technology was developed by the method of layer-by-layer deposition method of Fused Deposition Modeling (FDM).

A Robust True Direct-Print Technology for Tissue Engineering

2007 ◽  
Author(s):  
B. Li ◽  
T. Dutta Roy ◽  
C. M. Smith ◽  
P. A. Clark ◽  
K. H. Church
Keyword(s):  
Tissue Engineering ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Wide Range ◽  
Computer Aided ◽  
Liquid Material ◽  
Print Process

Numerous solid freeform fabrication (SFF) or rapid prototyping (RP) techniques have been employed in the field of tissue engineering to fabricate specially organized three-dimensional (3-D) structures such as scaffolds. Some such technologies include, but are not limited to, laminated object manufacturing (LOM), three-dimensional printing (3-DP) or ink-jet printing, selective laser sintering (SLS), and fused deposition modeling (FDM). These techniques are capable of rapidly producing highly complex 3-D scaffolds or other biomedical structures with the aid of a computer-aided design (CAD) system. However, they suffer from lack of consistency and repeatability, since most of these processes are not fully controlled and cannot reproduce the previous work with accuracy. Also, these techniques (excluding FDM) are not truly direct-print processes. Certain material removing steps are involved, which in turn increases the complexity and the cost of fabrication. The FDM process has good repeatability; however, the materials that can be used are limited due to the high temperature needed to melt the feedstock. Some researchers also reported that the scaffolds fabricated by FDM lack consistency in the z-direction. In this paper, we will present a true direct-print technology for repeatedly producing scaffolds and other biomedical structures for tissue engineering with the aid of our Computer Aided Biological (CAB) tool. Unlike other SFF techniques mentioned above, our direct-print process fabricates scaffolds or other complex 3-D structures by extruding (dispensing) a liquid material onto the substrate with a prescribed pattern generated by a CAD program. This can be a layer-by-layer 2.5 dimension build or a true 3-D build. The dispensed liquid material then polymerizes or solidifies, to form a solid structure. The flexibility in the types of materials that can be extruded ranges from polymers to living cells, encapsulated in the proper material. True 3-D structures are now possible on a wide range of substrates, including even in vivo. Some of the advantages of the process are a) researchers have full control over the patterns to be created; b) it is a true direct-print process with no material removing steps involved; c) it is highly consistent and repeatable; and d) it is highly efficient and cost-effective. This paper will first give a detailed description of the CAB tool. Then, it will present a detailed process for printing polycaprolactone (PCL) into a defined 3-D architecture, where the primary focus for these constructs is for use in tissue engineering applications. Finally, mechanical characterization results of the printed scaffolds will be included in the paper.

scholarly journals Curved Layer Fused Deposition Modeling in Conductive Polymer Additive Manufacturing

2011 ◽  
Vol 199-200 ◽  
pp. 1984-1987 ◽  
Author(s):  
Olaf Diegel ◽  
Sarat Singamneni ◽  
Ben Huang ◽  
Ian Gibson
Keyword(s):  
Additive Manufacturing ◽  
Printed Circuit Boards ◽  
Fused Deposition Modeling ◽  
Conductive Polymer ◽  
Fused Deposition ◽  
National University ◽  
Deposition Modeling ◽  
Plastic Components ◽  
Manufacturing Technologies ◽  
Plastic Parts

This paper describes a curved-layer additive manufacturing technology that has the potential to print plastic components with integral conductive polymer electronic circuits. Researchers at AUT University in New Zealand and the National University of Singapore have developed a novel Fused Deposition Modeling (FDM) process in which the layers of material that make up the part are deposited as curved layers instead of the conventional flat layers. This technology opens up possibilities of building curved plastic parts that have conductive electronic tracks and components printed as an integral part of the plastic component, thereby eliminating printed circuit boards and wiring. It is not possible to do this with existing flat-layer additive manufacturing technologies as the continuity of a circuit could be interrupted between the layers. With curved-layer fused deposition modeling (CLFDM) this problem is removed as continuous filaments in 3 dimensions can be produced, allowing for continuous conductive circuits.

scholarly journals Additive manufacturing of bone scaffolds

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Youwen Yang ◽  
Guoyong Wang ◽  
Huixin Liang ◽  
Chengde Gao ◽  
Shuping Peng ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Coupling Efficiency ◽  
Laser Sintering ◽  
High Heating Rate ◽  
Scaffold Design ◽  
Fused Deposition ◽  
Current Characteristics

Additive manufacturing (AM) can obtain not only customized external shape but also porous internal structure for scaffolds, both of which are of great importance for repairing large segmental bone defects. The scaffold fabrication process generally involves scaffold design, AM, and post-treatments. Thus, this article firstly reviews the state-of-the-art of scaffold design, including computer-aided design, reverse modeling, topology optimization, and mathematical modeling. In addition, the current characteristics of several typical AM techniques, including selective laser sintering, fused deposition modeling (FDM), and electron beam melting (EBM), especially their advantages and limitations are presented. In particular, selective laser sintering is able to obtain scaffolds with nanoscale grains, due to its high heating rate and a short holding time. However, this character usually results in insufficient densification. FDM can fabricate scaffolds with a relative high accuracy of pore structure but with a relative low mechanical strength. EBM with a high beam-material coupling efficiency can process high melting point metals, but it exhibits a low-resolution and poor surface quality. Furthermore, the common post-treatments, with main focus on heat and surface treatments, which are applied to improve the comprehensive performance are also discussed. Finally, this review also discusses the future directions for AM scaffolds for bone tissue engineering.

scholarly journals Getting Rid of the Wires: Curved Layer Fused Deposition Modeling in Conductive Polymer Additive Manufacturing

2011 ◽  
Vol 467-469 ◽  
pp. 662-667 ◽  
Author(s):  
Olaf Diegel ◽  
Sarat Singamneni ◽  
Ben Huang ◽  
Ian Gibson
Keyword(s):  
Additive Manufacturing ◽  
Printed Circuit Boards ◽  
Fused Deposition Modeling ◽  
Conductive Polymer ◽  
Plastic Shell ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Plastic Components ◽  
Manufacturing Technologies ◽  
Plastic Parts

This paper describes an additive manufacturing technology that has the potential to print plastic components with integral conductive polymer electronic circuits. This could have a major impact in the fields of robotics and mechatronics as it has the potential to allow large wiring looms, often an issue with complex robotic systems, to be printed as an integral part of the products plastic shell. This paper describes the development of a novel Fused Deposition Modeling (FDM) process in which the layers of material that make up the part are deposited as curved layers instead of the conventional flat layers. This opens up possibilities of building curved plastic parts that have conductive electronic tracks and components printed as an integral part of the plastic component, thereby eliminating printed circuit boards and wiring. It is not possible to do this with existing flatlayer additive manufacturing technologies as the continuity of a circuit could be interrupted between the layers. With curved-layer fused deposition modeling (CLFDM) this problem is removed as continuous filaments in 3 dimensions can be produced, allowing for continuous conductive circuits.

Additive manufacturing of shape memory polymers: effects of print orientation and infill percentage on mechanical properties

2018 ◽  
Vol 24 (4) ◽  
pp. 744-751 ◽  
Author(s):  
Jorge Villacres ◽  
David Nobes ◽  
Cagri Ayranci
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Shape Memory ◽  
Fused Deposition Modeling ◽  
Shape Memory Polymer ◽  
Longitudinal Axis ◽  
Layer By Layer ◽  
Content Type ◽  
Material Extrusion ◽  
Fused Deposition

Purpose Material extrusion additive manufacturing, also known as fused deposition modeling, is a manufacturing technique in which objects are built by depositing molten materials layer-by-layer through a nozzle. The use and application of this technique has risen dramatically over the past decade. This paper aims to first, report on the production and characterization of a shape memory polymer material filament that was manufactured to print shape memory polymer objects using material extrusion additive manufacturing. Additionally, it aims to investigate and outline the effects of major printing parameters, such as print orientation and infill percentage, on the elastic and mechanical properties of printed shape memory polymer samples. Design/methodology/approach Infill percentage was tested at three levels, 50, 75 and 100 per cent, while print orientation was tested at four different angles with respect to the longitudinal axis of the specimens at 0°, 30°, 60° and 90°. The properties examined were elastic modulus, ultimate tensile strength and maximum strain. Findings Results showed that print angle and infill percentage do have a significant impact on the manufactured test samples. Originality/value Findings can significantly influence the tailored design and manufacturing of smart structures using shape memory polymer and material extrusion additive manufacturing.

scholarly journals Investigation of Ceramic Dental Prostheses Based on ZrSiO4-Glass Composites Fabricated by Indirect Additive Manufacturing

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Marlon Wesley Machado Cunico
Keyword(s):  
Additive Manufacturing ◽  
Flexural Strength ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Dental Prosthesis ◽  
Dominant Type ◽  
Glass Composites ◽  
Fused Deposition ◽  
Control Factors ◽  
Computer Aided

Dental prosthesis and restoration technologies have been developed in the past years. Despite the advantages of additive manufacturing, computer-aided design, and computer-aided manufacturing technologies are still the dominant type of method for fabricating prostheses. Therefore, the main goal of this study is to assess the feasibility of using indirect fused deposition modeling to fabricate dental prosthesis made of ZrSiO4-glass composites. To achieve this goal, filaments were filled by 90% of ZrSiO4 and 50 μm glass spheres to fabricate prosthesis. Multivariable approach was applied to evaluate the feasibility of the proposed method. Holding temperature, holding time, heating rate, and cooling rate were considered the control factors, while shrinkage, flexural strength, and process feasibility were the study responses. In addition, the flexural strength of materials was found between 25 and 85 MPa, while shrinkage fluctuated between 10 and 25%.

Sign in / Sign up

Export Citation Format

Share Document