Embedded Flexible Hybrid Electronics for the Internet of Things

2015 ◽  
Vol 2015 (1) ◽  
pp. 000006-000013 ◽  
Author(s):  
Val R. Marinov
Keyword(s):  
Internet Of Things ◽  
Low Cost ◽  
System Level ◽  
Smart Devices ◽  
The Internet ◽  
Physical Form ◽  
Pick And Place ◽  
The Cost ◽  
The Internet Of Things ◽  
Generation Technology

The Internet of Things (IoT) “things” are often times described as active or smart devices and objects augmented with sensing, processing, and network capabilities. These smart objects are in the heart of the IoT concept but they alone cannot realize the full potential of IoT. The most ubiquitous objects in the IoT ecosystem, those that reside at the lowest system level and interact with the higher-level smart object, are based on the passive RFID technology. In the form of wireless passive sensors these objects are found in smart packaging, they form the backbone of the structural health monitoring systems, they provide non-invasive and continuous monitoring of physiological parameters, etc. RFID capability is already added to everyday items in the physical form of adhesive “smart” labels, enabling them to become “citizens” of the IoT ecosystem, but this “add-on“ approach increases the implementation cost and oftentimes impacts negatively the host item's form factor and appearance. It also does very little in terms of security and counterfeit prevention. On the other hand, the key economic factor that drives the deployment of the IoT is the cost at the end points. Therefore, the future of the IoT depends on developing an ultra-low-cost technology solution that can mass-produce low cost, RFID-enabled IoT objects on flexible substrates, ready for integration into everyday items. In some cases, such as in intelligent packaging, these objects will be non-obstructive and seamlessly integrated in their hosts. This integration will minimize the cost of implementation and will provide an insurmountable barrier to counterfeiters as they will need access to sophisticated and capital-intensive technologies in order to be able to alter or replicate the product's embedded configuration. Presented are two disruptive processes for packaging of ultrathin flexible hybrid electronic systems with ICs as thin as 15–20 μm and as small as 250 μm per side. The first generation technology is a modification of the conventional pick-and-place technique and has been already demonstrated on a commercial-grade roll-to-roll assembly line with packaging rates exceeding 10,000 cph. The second generation technology uses a laser beam to scan and transfer ultrathin, ultra-small ICs for high-precision assembly onto various flexible and rigid substrates. It provides packaging rates significantly exceeding those of the conventional pick-and-place equipment. Reported are also results from integrating the resulting ultrathin flexible hybrid electronic devices into thin materials such as paper and plastics.

scholarly journals HABITAT: An IoT Solution for Independent Elderly

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1258 ◽  
Author(s):  
Elena Borelli ◽  
Giacomo Paolini ◽  
Francesco Antoniazzi ◽  
Marina Barbiroli ◽  
Francesca Benassi ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Life Quality ◽  
The Elderly ◽  
System Level ◽  
Smart Devices ◽  
The Internet ◽  
Wearable Electronics ◽  
Frequency Identification ◽  
The Internet Of Things

In this work, a flexible and extensive digital platform for Smart Homes is presented, exploiting the most advanced technologies of the Internet of Things, such as Radio Frequency Identification, wearable electronics, Wireless Sensor Networks, and Artificial Intelligence. Thus, the main novelty of the paper is the system-level description of the platform flexibility allowing the interoperability of different smart devices. This research was developed within the framework of the operative project HABITAT (Home Assistance Based on the Internet of Things for the Autonomy of Everybody), aiming at developing smart devices to support elderly people both in their own houses and in retirement homes, and embedding them in everyday life objects, thus reducing the expenses for healthcare due to the lower need for personal assistance, and providing a better life quality to the elderly users.

From Users’ Intentions to IF-THEN Rules in the Internet of Things

2021 ◽  
Vol 39 (4) ◽  
pp. 1-33
Author(s):  
Fulvio Corno ◽  
Luigi De Russis ◽  
Alberto Monge Roffarello
Keyword(s):  
Internet Of Things ◽  
Smart Devices ◽  
The Internet ◽  
Short Term ◽  
Real World Data ◽  
Original Intention ◽  
Recommendation Accuracy ◽  
High Level ◽  
The Internet Of Things

In the Internet of Things era, users are willing to personalize the joint behavior of their connected entities, i.e., smart devices and online service, by means of trigger-action rules such as “IF the entrance Nest security camera detects a movement, THEN blink the Philips Hue lamp in the kitchen.” Unfortunately, the spread of new supported technologies makes the number of possible combinations between triggers and actions continuously growing, thus motivating the need of assisting users in discovering new rules and functionality, e.g., through recommendation techniques. To this end, we present , a semantic Conversational Search and Recommendation (CSR) system able to suggest pertinent IF-THEN rules that can be easily deployed in different contexts starting from an abstract user’s need. By exploiting a conversational agent, the user can communicate her current personalization intention by specifying a set of functionality at a high level, e.g., to decrease the temperature of a room when she left it. Stemming from this input, implements a semantic recommendation process that takes into account ( a ) the current user’s intention , ( b ) the connected entities owned by the user, and ( c ) the user’s long-term preferences revealed by her profile. If not satisfied with the suggestions, then the user can converse with the system to provide further feedback, i.e., a short-term preference , thus allowing to provide refined recommendations that better align with the original intention. We evaluate by running different offline experiments with simulated users and real-world data. First, we test the recommendation process in different configurations, and we show that recommendation accuracy and similarity with target items increase as the interaction between the algorithm and the user proceeds. Then, we compare with other similar baseline recommender systems. Results are promising and demonstrate the effectiveness of in recommending IF-THEN rules that satisfy the current personalization intention of the user.

scholarly journals Research on Indoor Positioning Algorithm of Single Reader Based on Gated Recurrent Unit

2021 ◽  
pp. 1-10
Author(s):  
Jintao Tang ◽  
Lvqing Yang ◽  
Jiangsheng Zhao ◽  
Yishu Qiu ◽  
Yihui Deng
Keyword(s):  
Internet Of Things ◽  
Radio Frequency Identification ◽  
Indoor Positioning ◽  
The Internet ◽  
Positioning Accuracy ◽  
Frequency Identification ◽  
The Cost ◽  
Positioning Algorithm ◽  
Gated Recurrent Unit ◽  
The Internet Of Things

With the development of the Internet of Things and Radio Frequency Identification (RFID), indoor positioning technology as an important part of positioning technology, has been attracting much attention in recent years. In order to solve the problems of low precision, high cost and signal collision between readers, a new indoor positioning algorithm based on a single RFID reader combined with a Double-order Gated Recurrent Unit (GRU) are proposed in this paper. Firstly, the reader is moved along the specified direction to collect the sequential tag data. Then, the tag’s coordinate is taken as the target value to train models and compare them with existing algorithms. Finally, the best Gated Recurrent Unit positioning model is used to estimate the position of the tags. Experiment results show that the proposed algorithm can effectively improve positioning accuracy, reduce the number of readers, cut down the cost and eliminate the collisions of reader signals.

scholarly journals Design a blockchain-based middleware layer in the Internet of Things Architecture

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Tanweer Alam
Keyword(s):  
Internet Of Things ◽  
Fog Computing ◽  
Smart Devices ◽  
The Internet ◽  
Novel Approach ◽  
Generation Computing ◽  
Critical Issues ◽  
Iot Devices ◽  
The Internet Of Things

In next-generation computing, the role of cloud, internet and smart devices will be capacious. Nowadays we all are familiar with the word smart. This word is used a number of times in our daily life. The Internet of Things (IoT) will produce remarkable different kinds of information from different resources. It can store big data in the cloud. The fog computing acts as an interface between cloud and IoT. The extension of fog in this framework works on physical things under IoT. The IoT devices are called fog nodes, they can have accessed anywhere within the range of the network. The blockchain is a novel approach to record the transactions in a sequence securely. Developing a new blockchains based middleware framework in the architecture of the Internet of Things is one of the critical issues of wireless networking where resolving such an issue would result in constant growth in the use and popularity of IoT. The proposed research creates a framework for providing the middleware framework in the internet of smart devices network for the internet of things using blockchains technology. Our main contribution links a new study that integrates blockchains to the Internet of things and provides communication security to the internet of smart devices.

scholarly journals IoT-Fog A Communication Framework using Blockchain in the Internet of Things

2020 ◽  
Author(s):  
Tanweer Alam
Keyword(s):  
Cloud Computing ◽  
Internet Of Things ◽  
Fog Computing ◽  
Emerging Technology ◽  
Smart Devices ◽  
The Internet ◽  
Next Generation ◽  
Communication Framework ◽  
Generation Computing ◽  
The Internet Of Things

<p>The fog computing is the emerging technology to compute, store, control and connecting smart devices with each other using cloud computing. The Internet of Things (IoT) is an architecture of uniquely identified interrelated physical things, these physical things are able to communicate with each other and can transmit and receive information. <a>This research presents a framework of the combination of the Internet of Things (IoT) and Fog computing. The blockchain is also the emerging technology that provides a hyper, distributed, public, authentic ledger to record the transactions. Blockchains technology is a secured technology that can be a boon for the next generation computing. The combination of fog, blockchains, and IoT creates a new opportunity in this area. In this research, the author presents a middleware framework based on the blockchain, fog, and IoT. The framework is implemented and tested. The results are found positive. </a></p>

scholarly journals Internet of things (IoT) based I-V curve tracer for photovoltaic monitoring systems

2019 ◽  
Vol 13 (3) ◽  
pp. 1022 ◽  
Author(s):  
H. B. Chi ◽  
M. F. N. Tajuddin ◽  
N. H. Ghazali ◽  
A. Azmi ◽  
M. U. Maaz
Keyword(s):  
Internet Of Things ◽  
Low Cost ◽  
Experimental Tests ◽  
Monitoring Systems ◽  
The Internet ◽  
Control Software ◽  
Curve Tracer ◽  
Current Voltage ◽  
The Internet Of Things

<span>This paper presents a low-cost PV current-voltage or <em>I-V</em> curve tracer that has the Internet of Things (IoT) capability. Single ended primary inductance converter (SEPIC) is used to develop the <em>I-V</em> tracer, which is able to cope with rapidly changing irradiation conditions. The <em>I-V</em> tracer control software also has the ability to automatically adapt to the varying irradiation conditions. The performance of the <em>I-V</em> curve tracer is evaluated and verified using simulation and experimental tests.</span>

Research on Human-Computer Interaction Control Method in the Background of Internet of Things

2021 ◽  
Author(s):  
Yingying Hu ◽  
Zhongyang Li
Keyword(s):  
Internet Of Things ◽  
Control Method ◽  
Computer Control ◽  
Control Device ◽  
Smart Devices ◽  
The Internet ◽  
Interactive Control ◽  
Interaction Control ◽  
Different Types ◽  
The Internet Of Things

Against the background of the growing development of the Internet of Things, this article conducts research on more efficient methods for controlling the interconnection of all things, and proposes that smart devices use the same operating platform, and the human-computer interface presents universal modular controls for manipulation, it can satisfy the requirement that one device controls several different types of controlled device simultaneously. At the same time, the interactive method uses the controlled device to actively submit control content to the control device, and discusses the human-computer interactive control method applicable to the Internet of Everything, and strives to achieve a convenient and easy-to-use human-computer control experience.

Research on Data Release and Location Monitoring Technology of Sensor Network Based on Internet of Things

2021 ◽  
Author(s):  
Bin Lin
Keyword(s):  
Wireless Sensor Network ◽  
Internet Of Things ◽  
Sensor Network ◽  
Low Cost ◽  
Wireless Sensor ◽  
The Internet ◽  
Network Data ◽  
Monitoring Technology ◽  
Software And Hardware ◽  
The Internet Of Things

The Internet of Things is another information technology revolution and industrial wave after computer, Internet and mobile communication. It is becoming a key foundation and an important engine for the green, intelligent and sustainable development of economic society. The new networked intelligent production mode characterized by the integration innovation of the Internet of Things is shaping the core competitiveness of the future manufacturing industry. The application of sensor network data positioning and monitoring technology based on the Internet of Things in industry, power and other industries is a hot field for the development of the Internet of Things. Sensor network processing and industrial applications are becoming increasingly complex, and new features have appeared in the sensor network scale and infrastructure in these fields. Therefore, the Internet of Things perception data processing has become a research hotspot in the deep integration process between industry and the Internet of Things. This paper deeply analyzes and summarizes the characteristics of sensor network perception data under the new trend of the Internet of Things as well as the research on location monitoring technology, and makes in-depth exploration from the release and location monitoring of sensor network perception data of the Internet of Things. Sensor network technology integrated sensor technology, micro-electromechanical system technology, wireless communication technology, embedded computing technology and distributed information processing technology in one, with easy layout, easy control, low power consumption, flexible communication, low cost and other characteristics. Therefore, based on the release and location monitoring technologies of sensor network data based on the Internet of Things in different applications, this paper studies the corresponding networking technologies, energy management, data management and fusion methods. Standardization system in wireless sensor network low cost, and convenient data management needs, design the iot oriented middleware, and develops the software and hardware system, the application demonstration, the results show that the design of wireless sensor network based on iot data monitoring and positioning technology is better meet the application requirements, fine convenient integration of software and hardware, and standardized requirements and suitable for promotion.

Introduction

2018 ◽  
Author(s):  
Mikael Wiberg
Keyword(s):  
3D Printing ◽  
Internet Of Things ◽  
Interaction Design ◽  
Physical World ◽  
The Internet ◽  
Physical Form ◽  
Connected Cars ◽  
Design Projects ◽  
Physical Materials ◽  
The Internet Of Things

Computing is increasingly intertwined with our physical world. From smart watches to connected cars, to the Internet of Things and 3D-printing, the trend towards combining digital and analogue materials in design is no longer an exception, but a hallmark for where interaction design is going in general. Computational processing increasingly involves physical materials, computing is increasingly manifested and expressed in physical form, and interaction with these new forms of computing is increasingly mediated via physical materials. Interaction Design is therefore increasingly a material concern. – Welcome to a book on the materiality of interaction, welcome to a book on material-centered interaction design! In this introduction to this book, “The Materiality of Interaction – Notes on the Materials of Interaction Design”, I describe the contemporary trend in interaction design towards material interactions, I describe how interaction design is increasingly about materials, and I propose “Material-centered interaction design” as a method for working with materials in interaction design projects.

Bridging the IoT Gap Through Edge Computing

2019 ◽  
pp. 1-9
Author(s):  
R. I. Minu ◽  
G. Nagarajan
Keyword(s):  
Internet Of Things ◽  
Information Needs ◽  
Edge Computing ◽  
The Internet ◽  
Cloud Server ◽  
The Cost ◽  
The Internet Of Things ◽  
Clear Objective ◽  
Origin Point

In the present-day scenario, computing is migrating from the on-premises server to the cloud server and now, progressively from the cloud to Edge server where the data is gathered from the origin point. So, the clear objective is to support the execution and unwavering quality of applications and benefits, and decrease the cost of running them, by shortening the separation information needs to travel, subsequently alleviating transmission capacity and inactivity issues. This chapter provides an insight of how the internet of things (IoT) connects with edge computing.

Sign in / Sign up

Export Citation Format

Share Document