Activation energy calculation from a linearly-increasing-temperature experiment

1964 ◽  
Author(s):  
T R Ingraham ◽  
P Marier
2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Alberto Palma ◽  
Javier Mauricio Loaiza ◽  
Manuel J. Díaz ◽  
Juan Carlos García ◽  
Inmaculada Giráldez ◽  
...  

Abstract Background Burning fast-growing trees for energy production can be an effective alternative to coal combustion. Thus, lignocellulosic material, which can be used to obtain chemicals with a high added value, is highly abundant, easily renewed and usually inexpensive. In this work, hemicellulose extraction by acid hydrolysis of plant biomass from three different crops (Chamaecytisus proliferus, Leucaena diversifolia and Paulownia trihybrid) was modelled and the resulting solid residues were used for energy production. Results The influence of the nature of the lignocellulosic raw material and the operating conditions used to extract the hemicellulose fraction on the heat capacity and activation energy of the subsequent combustion process was examined. The heat power and the activation energy of the combustion process were found to depend markedly on the hemicellulose content of the raw material. Thus, a low content in hemicelluloses resulted in a lower increased energy yield after acid hydrolysis stage. The process was also influenced by the operating conditions of the acid hydrolysis treatment, which increased the gross calorific value (GCV) of the solid residue by 0.6–9.7% relative to the starting material. In addition, the activation energy of combustion of the acid hydrolysis residues from Chamaecytisus proliferus (Tagasaste) and Paulownia trihybrid (Paulownia) was considerably lower than that for the starting materials, the difference increasing with increasing degree of conversion as well as with increasing temperature and acid concentration in the acid hydrolysis. The activation energy of combustion of the solid residues from acid hydrolysis of tagasaste and paulownia decreased markedly with increasing degree of conversion, and also with increasing temperature and acid concentration in the acid hydrolysis treatment. No similar trend was observed in Leucaena diversifolia (Leucaena) owing to its low content in hemicelluloses. Conclusions Acid hydrolysis of tagasaste, leucaena and paulownia provided a valorizable liquor containing a large amount of hemicelluloses and a solid residue with an increased heat power amenable to efficient valorization by combustion. There are many potential applications of the hemicelluloses-rich and lignin-rich fraction, for example as multi-components of bio-based feedstocks for 3D printing, for energy and other value-added chemicals.


2018 ◽  
Vol 4 (1) ◽  
pp. 1-5 ◽  
Author(s):  
Nikolay A. Kalanda

Polycrystalline Sr2FeMoO6-δ specimens have been obtained by solid state synthesis from partially reduced SrFeO2,52 and SrMoO4 precursors. It has been shown that during oxygen desorption from the Sr2FeMoO6-δ compound in polythermal mode in a 5%H2/Ar gas flow at different heating rates, the oxygen index 6-δ depends on the heating rate and does not achieve saturation at T = 1420 K. Oxygen diffusion activation energy calculation using the Merzhanov method has shown that at an early stage of oxygen desorption from the Sr2FeMoO6-δ compound the oxygen diffusion activation energy is the lowest Еа = 76.7 kJ/mole at δ = 0.005. With an increase in the concentration of oxygen vacancies, the oxygen diffusion activation energy grows to Еа = 156.3 kJ/mole at δ = 0.06. It has been found that the dδ/dt = f (Т) and dδ/dt = f (δ) functions have a typical break which allows one to divide oxygen desorption in two process stages. It is hypothesized that an increase in the concentration of oxygen vacancies Vo•• leads to their mutual interaction followed by ordering in the Fe/Mo-01 crystallographic planes with the formation of various types of associations.


Author(s):  
Maria F. de Morais ◽  
José R. O. dos Santos ◽  
Marisângela P. dos Santos ◽  
Dyego da C. Santos ◽  
Tiago N. da Costa ◽  
...  

ABSTRACT This study aimed to dry ‘bacaba’ (Oenocarpus bacaba Mart.) pulp under different thermal conditions, fit different mathematical models to the dehydration curves, and calculate the diffusion coefficients, activation energy and thermodynamic properties of the process. ‘Bacaba’ fruits were meshed to obtain the pulp, which was dried at temperatures of 40, 50 and 60 °C and with thickness of 1.0 cm. Increase in drying temperature reduced the dehydration times, as well as the equilibrium moisture contents, and drying rates of 0.65, 1.04 and 1.25 kg kg min-1 were recorded at the beginning of the process for temperatures of 40, 50 and 60 °C, respectively. The Midilli’s equation was selected as the most appropriate to predict the drying phenomenon, showing the highest R2, lowest values of mean square deviation (MSD) and χ2 under most thermal conditions, and random distribution of residuals under all experimental conditions. The effective diffusion coefficients increased with increasing temperature, with magnitudes of the order of 10-9 m2 s-1, being satisfactorily described by the Arrhenius equation, which showed activation energy (Ea) of 37.01 kJ mol-1. The drying process was characterized as endergonic, in which enthalpy (ΔH) and entropy (ΔS) reduced with the increment of temperature, while Gibbs free energy (ΔG) was increased.


2014 ◽  
Vol 50 (1) ◽  
pp. 15-21 ◽  
Author(s):  
Y. Wang ◽  
L. Wang ◽  
J. Yu ◽  
K.C. Chou

In order to optimize the current reduction process of chromite, a good knowledge of reduction mechanism involved is required. The basic component in chromite ore is FeCr2O4, thus, kinetic investigation of synthetic FeCr2O4 with different amount of carbon were carried out in the temperature range of 1473K to 1673K under both isothermal and non-isothermal mode. The iron can be easily reduced compared with chromium. And higher reduction degree of chromite can be achieved by increasing temperature and carbon content. With the supporting of X-ray Diffraction and Scanning Electron Microscope methods, the formation of metallic products followed the sequence: Fe-C alloy, (Fe,Cr)7C3and Fe-Cr-C alloy. Kinetics analysis showed that the first stage was controlled by nucleation with an apparent activation energy of 120kJ/mol, while the chromium reduction was controlled by crystallochemical transformation with an apparent activation energy of 288kJ/mol.


2016 ◽  
Vol 12 (5) ◽  
pp. 481-489 ◽  
Author(s):  
Daniel I. Onwude ◽  
Norhashila Hashim ◽  
Rimfiel B. Janius ◽  
Nazmi Nawi ◽  
Khalina Abdan

Abstract This study seeks to investigate the effects of temperature (50, 60, 70 and 80 °C) and material thickness (3, 5 and 7 mm), on the drying characteristics of pumpkin (Cucurbita moschata). Experimental data were used to estimate the effective moisture diffusivities and activation energy of pumpkin by using solutions of Fick’s second law of diffusion or its simplified form. The calculated value of moisture diffusivity with and without shrinkage effect varied from a minimum of 1.942 × 10–8 m2/s to a maximum of 9.196 × 10–8 m2/s, while that of activation energy varied from 5.02158 to 32.14542 kJ/mol with temperature ranging from 50 to 80 °C and slice thickness of 3 to 7 mm at constant air velocity of 1.16 m/s, respectively. The results indicated that with increasing temperature, and reduction of slice thickness, the drying time was reduced by more than 30 %. The effective moisture diffusivity increased with an increase in drying temperature with or without shrinkage effect. An increase in the activation energy was observed due to an increase in the slice thickness of the pumpkin samples.


2011 ◽  
Vol 393-395 ◽  
pp. 1189-1192
Author(s):  
Ying Xian Zhao ◽  
Bo Shen

The hydrocracking of a pentane-insoluble asphaltene over NiMo/γ-Al2O3 at 623 - 703 K was investigated. The second order kinetic equation fits experimental data of asphaltene conversion adequately, giving the apparent activation energy to be 144 kJ/mol over the temperature range. Average molecular weight of liquid product was reduced significantly with increasing temperature.


1984 ◽  
Vol 62 (5) ◽  
pp. 899-906 ◽  
Author(s):  
Jan Niedzielski ◽  
T. Yano ◽  
E. Tschuikow-Roux

The abstraction of hydrogen/deuterium from CH3CHDCl by ground state chlorine atoms produced photolytically from Cl2 has been investigated at temperatures betwen 280 and 368 K. The relative rates for the internal competition[Formula: see text]are found to conform to an Arrhenius rate law:[Formula: see text]These data, taken together with the external competition results for the C2H5Cl/CH3CHDCl system, in conjunction with the competitive results using CH4 as a primary reference, have yielded the rate constants (cm3 s−1):[Formula: see text]The relatively weak primary kinetic isotope effect, kH/kD, decreases with increasing temperature from 1,855 at 280 K to 1.66 at 365 K. The results are compared with those obtained based on the BEBO method. While both the trend and the magnitude of the kinetic isotope effect are satisfactorily predicted, the activation energy is not.


Sign in / Sign up

Export Citation Format

Share Document