scholarly journals In vivo bone response and interfacial properties of titanium-alloy implant with different designs in rabbit model with time

2011 ◽  
Vol 22 (2) ◽  
pp. 277 ◽  
Author(s):  
Biswanath Kundu ◽  
TamalKanti Pal ◽  
Abhijit Chakraborty ◽  
Debabrata Basu ◽  
SamitKumar Nandi
Keyword(s):  
Titanium Alloy ◽  
Rabbit Model ◽  
Interfacial Properties ◽  
Bone Response

scholarly journals Comparison between Sandblasted Acid-Etched and Oxidized Titanium Dental Implants: In Vivo Study

2019 ◽  
Vol 20 (13) ◽  
pp. 3267 ◽  
Author(s):  
Eugenio Velasco-Ortega ◽  
Ivan Ortiz-García ◽  
Alvaro Jiménez-Guerra ◽  
Loreto Monsalve-Guil ◽  
Fernando Muñoz-Guzón ◽  
...  
Keyword(s):  
Residual Stress ◽  
Dental Implants ◽  
Rabbit Model ◽  
Chemical Properties ◽  
In Vivo Study ◽  
Implant Surface ◽  
Bone Response ◽  
Etched Surface ◽  
Titanium Dental Implants

The surface modifications of titanium dental implants play important roles in the enhancement of osseointegration. The objective of the present study was to test two different implant surface treatments on a rabbit model to investigate the osseointegration. The tested surfaces were: a) acid-etched surface with sandblasting treatment (SA) and b) an oxidized implant surface (OS). The roughness was measured by an interferometeric microscope with white light and the residual stress of the surfaces was measured with X-ray residual stress Bragg–Bentano diffraction. Six New Zealand white rabbits were used for the in vivo study. Implants with the two different surfaces (SA and OS) were inserted in the femoral bone. After 12 weeks of implantation, histological and histomorphometric analyses of the blocks containing the implants and the surrounding bone were performed. All the implants were correctly implanted and no signs of infection were observed. SA and OS surfaces were both surrounded by newly formed trabeculae. Histomorphometric analysis revealed that the bone–implant contact % (BIC) was higher around the SA implants (53.49 ± 8.46) than around the OS implants (50.94 ± 16.42), although there were no significant statistical differences among them. Both implant surfaces (SA and OS) demonstrated a good bone response with significant amounts of newly formed bone along the implant surface after 12 weeks of implantation. These results confirmed the importance of the topography and physico–chemical properties of dental implants in the osseointegration.

scholarly journals Influence of Three Dental Implant Surfaces on Cell Viability and Bone Behavior. An In Vitro and a Histometric Study in a Rabbit Model

2020 ◽  
Vol 10 (14) ◽  
pp. 4790
Author(s):  
María Rizo-Gorrita ◽  
Ignacio Fernandez-Asian ◽  
Andreina Garcia-de-Frenza ◽  
Celia Vazquez-Pachon ◽  
Maria-Angeles Serrera-Figallo ◽  
...  
Keyword(s):  
Bone Density ◽  
Cell Viability ◽  
Dental Implants ◽  
Surface Characterization ◽  
Rabbit Model ◽  
Surface Characteristics ◽  
Study Groups ◽  
Bone Response

The chemical composition and the surface characteristics of dental implants are factors that have a decisive effect on the osseointegration process. The surface characterization at the compositional and topographic level of three dental implants available in the market was performed with different surface treatments: (1) sandblasted and acid etched surface (SLA), (2) hydroxyapatite (HA) and tricalcium phosphate (TCP) blasted surface (HA/TCP), and (3) HA-blasted and non-etching acid washed surface (HA + AW). In addition, an in vitro viability study of MG-63 osteoblast cells was performed with a JC-1 test. To complete the study, an in vivo study was conducted in New Zealand rabbits. The study analyzed the histometric characteristics of the bone formed around the implants at the level of area, volume, bone density, accumulated bone density, and bone–implant contact (BIC). The rabbits were sacrificed at 6 weeks after implants were placed in the tibial metaphysis. No statistically significant differences were observed at the level of cell viability or histometric parameters between the different study groups (p > 0.05). SLA and HA/TCP surfaces were the ones that obtained a higher BIC value. Taking into account the limitations of this study, it can be concluded that the different implant surfaces analyzed favor a good bone response.

Acyl-Enzymes as Thrombolytic Agents in a Rabbit Model of Venous Thrombosis

1982 ◽  
Vol 47 (03) ◽  
pp. 269-274 ◽  
Author(s):  
R A G Smith ◽  
R J Dupe ◽  
P D English ◽  
J Green
Keyword(s):  
Venous Thrombosis ◽  
Active Site ◽  
Fibrinolytic Activity ◽  
Rabbit Model ◽  
Fibrinolytic Agent ◽  
Essential Nature ◽  
Thrombolytic Agents

SummaryA derivative of human lys-plasmin in which the active site has been reversibly acylated (BRL 26920; p-anisoyl human lys-plasmin) has been examined as a fibrinolytic agent in a previously described rabbit model of venous thrombosis and shown to be significantly more active and less fibrinogenolytic than free plasmin. A p-anisoylated derivative of a streptokinase (SK)-activated plasmin preparation was significantly less fibrinogenolytic in vivo than the non-acylated enzyme. Acylation increased the fibrinolytic activity of preparations of SK-plasmin activator complexes. BRL 26921, the active site anisoylated derivative of the primary 2-chain SK-plasminogen complex was the most potent fibrinolytic agent studied. SK-Val442-plasminogen complexes, free or acylated, were biologically inactive in this model and confirm the essential nature of fibrin binding processes for effective thrombolysis in vivo.

scholarly journals Unraveling the molecular pathobiology of vocal fold systemic dehydration using an in vivo rabbit model

PLoS ONE ◽  
2020 ◽  
Vol 15 (7) ◽  
pp. e0236348
Author(s):  
Naila Cannes do Nascimento ◽  
Andrea P. dos Santos ◽  
M. Preeti Sivasankar ◽  
Abigail Cox
Keyword(s):  
Vocal Fold ◽  
Rabbit Model

scholarly journals Evaluation of a bone filler scaffold for local antibiotic delivery to prevent Staphylococcus aureus infection in a contaminated bone defect

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Karen E. Beenken ◽  
Mara J. Campbell ◽  
Aura M. Ramirez ◽  
Karrar Alghazali ◽  
Christopher M. Walker ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Bone Defect ◽  
Rabbit Model ◽  
In Vivo Studies ◽  
Bovine Bone ◽  
Bone Filler ◽  
Antibiotic Release ◽  
Local Antibiotic ◽  
Antibiotic Delivery

AbstractWe previously reported the development of an osteogenic bone filler scaffold consisting of degradable polyurethane, hydroxyapatite, and decellularized bovine bone particles. The current study was aimed at evaluating the use of this scaffold as a means of local antibiotic delivery to prevent infection in a bone defect contaminated with Staphylococcus aureus. We evaluated two scaffold formulations with the same component ratios but differing overall porosity and surface area. Studies with vancomycin, daptomycin, and gentamicin confirmed that antibiotic uptake was concentration dependent and that increased porosity correlated with increased uptake and prolonged antibiotic release. We also demonstrate that vancomycin can be passively loaded into either formulation in sufficient concentration to prevent infection in a rabbit model of a contaminated segmental bone defect. Moreover, even in those few cases in which complete eradication was not achieved, the number of viable bacteria in the bone was significantly reduced by treatment and there was no radiographic evidence of osteomyelitis. Radiographs and microcomputed tomography (µCT) analysis from the in vivo studies also suggested that the addition of vancomycin did not have any significant effect on the scaffold itself. These results demonstrate the potential utility of our bone regeneration scaffold for local antibiotic delivery to prevent infection in contaminated bone defects.

scholarly journals β-elemene alleviates airway stenosis via the ILK/Akt pathway modulated by MIR143HG sponging miR-1275

2021 ◽  
Vol 26 (1) ◽  
Author(s):  
Guoying Zhang ◽  
Cheng Xue ◽  
Yiming Zeng
Keyword(s):  
Cell Cycle ◽  
Cell Viability ◽  
Cell Model ◽  
Protective Efficacy ◽  
Rabbit Model ◽  
Akt Pathway ◽  
Loss Of Function ◽  
Airway Stenosis

Abstract Background We have previously found that β-elemene could inhibit the viability of airway granulation fibroblasts and prevent airway hyperplastic stenosis. This study aimed to elucidate the underlying mechanism and protective efficacy of β-elemene in vitro and in vivo. Methods Microarray and bioinformatic analysis were used to identify altered pathways related to cell viability in a β-elemene-treated primary cell model and to construct a β-elemene-altered ceRNA network modulating the target pathway. Loss of function and gain of function approaches were performed to examine the role of the ceRNA axis in β-elemene's regulation of the target pathway and cell viability. Additionally, in a β-elemene-treated rabbit model of airway stenosis, endoscopic and histological examinations were used to evaluate its therapeutic efficacy and further verify its mechanism of action. Results The hyperactive ILK/Akt pathway and dysregulated LncRNA-MIR143HG, which acted as a miR-1275 ceRNA to modulate ILK expression, were suppressed in β-elemene-treated airway granulation fibroblasts; β-elemene suppressed the ILK/Akt pathway via the MIR143HG/miR-1275/ILK axis. Additionally, the cell cycle and apoptotic phenotypes of granulation fibroblasts were altered, consistent with ILK/Akt pathway activity. In vivo application of β-elemene attenuated airway granulation hyperplasia and alleviated scar stricture, and histological detections suggested that β-elemene's effects on the MIR143HG/miR-1275/ILK axis and ILK/Akt pathway were in line with in vitro findings. Conclusions MIR143HG and ILK may act as ceRNA to sponge miR-1275. The MIR143HG/miR-1275/ILK axis mediates β-elemene-induced cell cycle arrest and apoptosis of airway granulation fibroblasts by modulating the ILK/Akt pathway, thereby inhibiting airway granulation proliferation and ultimately alleviating airway stenosis.

scholarly journals Development of a photochemical thrombosis investigation system to obtain a rabbit ischemic stroke model

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yoonhee Kim ◽  
Yoon Bum Lee ◽  
Seung Kuk Bae ◽  
Sung Suk Oh ◽  
Jong-ryul Choi
Keyword(s):  
Ischemic Stroke ◽  
Brain Damage ◽  
Rabbit Model ◽  
Specific Area ◽  
Brain Atlas ◽  
Rabbit Brain ◽  
Stroke Model ◽  
Triphenyltetrazolium Chloride ◽  
Induction System

AbstractPhotochemical thrombosis is a method for the induction of ischemic stroke in the cerebral cortex. It can generate localized ischemic infarcts in the desired region; therefore, it has been actively employed in establishing an ischemic stroke animal model and in vivo assays of diagnostic and therapeutic techniques for stroke. To establish a rabbit ischemic stroke model and overcome the shortcoming of previous studies that were difficult to build a standardized photothrombotic rabbit model, we developed a photochemical thrombosis induction system that can produce consistent brain damage on a specific area. To verify the generation of photothrombotic brain damage using the system, longitudinal magnetic resonance imaging, 2,3,5-triphenyltetrazolium chloride staining, and histological staining were applied. These analytical methods have a high correlation for ischemic infarction and are appropriate for analyzing photothrombotic brain damage in the rabbit brain. The results indicated that the photothrombosis induction system has a main advantage of being accurately controlled a targeted region of photothrombosis and can produce cerebral hemisphere lesions on the target region of the rabbit brain. In conjugation with brain atlas, it can induce photochemical ischemic stroke locally in the part of the brain that is responsible for a particular brain function and the system can be used to develop animal models with degraded specific functions. Also, the photochemical thrombosis induction system and a standardized rabbit ischemic stroke model that uses this system have the potential to be used for verifications of biomedical techniques for ischemic stroke at a preclinical stage in parallel with further performance improvements.

scholarly journals Development of Triamcinolone Acetonide-Loaded Microemulsion as a Prospective Ophthalmic Delivery System for Treatment of Uveitis: In Vitro and In Vivo Evaluation

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 444
Author(s):  
Alaa Mahran ◽  
Sayed Ismail ◽  
Ayat A. Allam
Keyword(s):  
Triamcinolone Acetonide ◽  
Delivery System ◽  
Histopathological Examination ◽  
Rabbit Model ◽  
Subconjunctival Injection ◽  
In Vivo Evaluation ◽  
Ternary Phase Diagrams ◽  
Ophthalmic Delivery

Treatment of uveitis (i.e., inflammation of the uvea) is challenging due to lack of convenient ophthalmic dosage forms. This work is aimed to determine the efficiency of triamcinolone acetonide (TA)-loaded microemulsion as an ophthalmic delivery system for the treatment of uveitis. Water titration method was used to construct different pseudo-ternary phase diagrams. Twelve microemulsion formulations were prepared using oleic acid, Cremophor EL, and propylene glycol. Among all tested formulations, Formulation F3, composed of oil: surfactant-co-surfactant (1:1): water (15:35:50% w/w, respectively), was found to be stable and showed acceptable pH, viscosity, conductivity, droplet size (211 ± 1.4 nm), and zeta potential (−25 ± 1.7 mV) and almost complete in vitro drug release within 24 h. The in vivo performance of the optimized formulation was evaluated in experimentally uveitis-induced rabbit model and compared with a commercial TA suspension (i.e., Kenacort®-A) either topically or by subconjunctival injection. Ocular inflammation was evaluated by clinical examination, white blood cell count, protein content measurement, and histopathological examination. The developed TA-loaded microemulsion showed superior therapeutic efficiency in the treatment of uveitis with high patient compliance compared to commercial suspension. Hence, it could be considered as a potential ocular treatment option in controlling of uveitis.

Sign in / Sign up

Export Citation Format

Share Document