The effects of tillage systems and crop sequences on soil bulk density and penetration resistance on a clay soil in southern Saskatchewan

1993 ◽  
Vol 73 (2) ◽  
pp. 223-232 ◽  
Author(s):  
C. A. Grant ◽  
G. P. Lafond
Keyword(s):  
Bulk Density ◽  
Crop Rotation ◽  
Crop Production ◽  
Clay Soil ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Tillage Systems ◽  
Soil Zone ◽  
Continuous Rotation ◽  
Heavy Clay

Concern has been expressed that reduced tillage systems may lead to excess soil compaction, negatively impacting on crop growth. The objectives of this study were to determine the effects of tillage systems zero (ZT), minimum (MT) and conventional tillage (CT) and crop rotations on soil bulk density and penetration resistance after 4 yr on an Indian Head heavy clay soil, in southeastern Saskatchewan. Moisture content was similar among tillage systems, except for slight differences in the lower soil depths with crop rotation. Penetration resistance and bulk density of a heavy clay soil were increased in the surface 10 cm of the soil by ZT as compared to CT management. However, in the deeper soil zones, tillage system did not consistently influence either bulk density or penetration resistance. Inclusion of peas in the crop rotation had a moderating effect on bulk density and penetration resistance, while inclusion of flax in a continuous rotation increased bulk density and penetration resistance in the surface soil profile. At the 30- to 45-cm depth, ZT had a lower bulk density than CT or MT in the rotation which included fallow, possibly because the tillage operations associated with the cultivated fallow led to compaction in the deeper soil zone. Penetration resistance was great enough in the deeper soil zone in all tillage systems to restrict rooting, but difference due to tillage treatment or cropping rotation was not sufficient to markedly influence crop production. Key words: Penetration resistance, bulk density, crop rotation, tillage

scholarly journals Modeling and correction of soil penetration resistance for variations in soil moisture and soil bulk density

2016 ◽  
Vol 36 (3) ◽  
pp. 449-459 ◽  
Author(s):  
Wininton M. da Silva ◽  
Aloísio Bianchini ◽  
Cesar A. da Cunha
Keyword(s):  
Soil Moisture ◽  
Bulk Density ◽  
Linear Models ◽  
Clay Soil ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Good Representation ◽  
Soil Resistance ◽  
Soil Penetration Resistance ◽  
Resistance Value

ABSTRACT This study aimed to describe the behavior of models for adjusting data of soil penetration resistance for variations in soil moisture and soil bulk density. The study was carried out in Lucas do Rio Verde, MT, Brazil in a typic dystrophic red-yellow Latosol (Oxisol) containing 0.366 kg kg−1 of clay. Soil penetration resistance measurements were conducted in the soil moistures of 0.33 kg kg−1, 0.28 kg kg−1, 0.25 kg kg−1 and 0.22 kg kg−1. Soil penetration resistance behavior due to variations in soil moisture and soil bulk density was assessed by estimating the soil resistance values by non-linear models. There was an increase of the soil penetration resistance values as soil was losing moisture. For the same edaphic condition studied, small differences in the data of soil bulk density affect differently the response of soil resistance as a function of moisture. Both soil bulk density and soil moisture are essential attributes to explain the variations in soil penetration resistance in the field. The good representation of the critical soil bulk density curve as a limiting compression indicator requires the proper choice of the restrictive soil resistance value for each crop.

scholarly journals Comparison of Energy Used and Effects on Bulk Density and Yield by Tillage Systems in a Semiarid Condition of Mexico

Agronomy ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 189 ◽  
Author(s):  
Alfredo López-Vázquez ◽  
Martin Cadena-Zapata ◽  
Santos Campos-Magaña ◽  
Alejandro Zermeño-Gonzalez ◽  
Mario Mendez-Dorado
Keyword(s):  
Bulk Density ◽  
Crop Production ◽  
Dry Matter ◽  
Minimum Energy ◽  
Average Energy ◽  
Soil Mass ◽  
Soil Bulk Density ◽  
Forage Yield ◽  
Dry Matter Yield ◽  
Tillage Systems

Energy used for tillage is an input with a high impact on the cost of crop production; it is desirable to till the soil using minimum energy. The objective of this study was to compare the specific energy expenditure, effect on soil bulk density, and forage yield of maize, by three tillage systems: Disk plow/Disk Harrow/planter (DDP), Chisel plow/Disk harrow/planter (CHDP) and No-Tillage (NT). Energy was measured for tillage operations in the summer season of 2013, 2016, and 2017. Bulk density in 2013 and 2016. Yield in 2013 and 2014. The variables of drawbar force (kN), working speed (m s−1), width (m), depth (m), fuel consumption (L ha−1), bulk density (g cm−3), and dry matter yield (Mg ha−1) were measured. Results showed that there were significant differences in the amount of energy used per ha; DDP used an average of 379.75 MJ, CHDP 135.01 MJ, and NT 26.43 MJ. The average energy applied to the soil mass for each system was 400 J kg−1 for DDP, 255.13 J kg−1 for CHDP, and for NT was 237.8 J kg−1. The overall energy efficiency was; 18.23% for DDP, 6.88% for CHDP, and 4.77% for N. The bulk density decreased significantly after three years for NT. There were no significant differences in dry matter yield. In the semiarid condition of Mexico, CHDP and NT are options for saving from 64% to 93% of energy, compared with DDP.

Soil compaction under varying rest periods and levels of mechanical disturbance in a rotational grazing system

2011 ◽  
Vol 91 (6) ◽  
pp. 957-964 ◽  
Author(s):  
C. Halde ◽  
A. M. Hammermeister ◽  
N. L. Mclean ◽  
K. T. Webb ◽  
R. C. Martin
Keyword(s):  
Bulk Density ◽  
Soil Compaction ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Intensive Treatment ◽  
Rotational Grazing ◽  
Pasture Management ◽  
Soil Penetration Resistance ◽  
Rest Periods ◽  
Grazing System

Halde, C., Hammermeister, A. M., McLean, N. L., Webb, K. T. and Martin, R. C. 2011. Soil compaction under varying rest periods and levels of mechanical disturbance in a rotational grazing system. Can. J. Soil Sci. 91: 957–964. In Atlantic Canada, data are limited regarding the effect of grazing systems on soil compaction. The objective of the study was to determine the effect of intensive and extensive rotational pasture management treatments on soil bulk density, soil penetration resistance, forage productivity and litter accumulation. The study was conducted on a fine sandy loam pasture in Truro, Nova Scotia. Each of the eight paddocks was divided into three rotational pasture management treatments: intensive, semi-intensive and extensive. Mowing and clipping were more frequent in the intensive than in the semi-intensive treatment. In the extensive treatment, by virtue of grazing in alternate rotations, the rest period was doubled than that of the intensive and semi-intensive treatments. Both soil bulk density (0–5 cm) and penetration resistance (0–25.5 cm) were significantly higher in the intensive treatment than in the extensive treatment, for all seasons. Over winter, bulk density decreased significantly by 6.8 and 3.8% at 0–5 and 5–10 cm, respectively. A decrease ranging between 40.5 and 4.0% was observed for soil penetration resistance over winter, at 0–1.5 cm and 24.0–25.5 cm, respectively. The intensive and semi-intensive treatments produced significantly more available forage for grazers annually than the extensive treatment. Forage yields in late May to early June were negatively correlated with spring bulk density.

scholarly journals Tillage and crop rotation effects on soil carbon and selected soil physical properties in a Haplic Cambisol in Eastern Cape, South Africa

2019 ◽  
Vol 15 (No. 1) ◽  
pp. 47-54 ◽  
Author(s):  
Mxolisi Mtyobile ◽  
Lindah Muzangwa ◽  
Pearson Nyari Stephano Mnkeni
Keyword(s):  
South Africa ◽  
Water Content ◽  
Bulk Density ◽  
Soil Water ◽  
Soil Water Content ◽  
Crop Rotation ◽  
Soil Bulk Density ◽  
Crop Rotations ◽  
Soil Porosity ◽  
No Till

The effects of tillage and crop rotation on the soil carbon, the soil bulk density, the porosity and the soil water content were evaluated during the 6<sup>th</sup> season of an on-going field trial at the University of Fort Hare Farm (UFH), South Africa. Two tillage systems; conventional tillage (CT) and no-till and crop rotations; maize (Zea mays L.)-fallow-maize (MFM), maize-fallow-soybean (Glycine max L.) (MFS); maize-wheat (Triticum aestivum L.)-maize (MWM) and  maize-wheat-soybean (MWS) were evaluated. The field experiment was a 2 × 4 factorial, laid out in a randomised complete design. The crop residues were retained for the no-till plots and incorporated for the CT plots, after each cropping season. No significant effects (P &gt; 0.05) of the tillage and crop rotation on the bulk density were observed. However, the values ranged from 1.32 to1.37 g/cm<sup>3</sup>. Significant interaction effects of the tillage and crop rotation were observed on the soil porosity (P &lt; 0.01) and the soil water content (P &lt; 0.05). The porosity for the MFM and the MWS, was higher under the CT whereas for the MWM and the MWS, it was higher under the no-till. However, the greatest porosity was under the MWS. Whilst the no-till significantly increased (P &lt; 0.05) the soil water content compared to the CT; the greatest soil water content was observed when the no-till was combined with the MWM rotations. The soil organic carbon (SOC) was increased more (P &lt; 0.05) by the no-till than the CT, and the MFM consistently had the least SOC compared with the rest of the crop rotations, at all the sampling depths (0–5, 5–10 and 10–20 cm). The soil bulk density negatively correlated with the soil porosity and the soil water content, whereas the porosity positively correlated with the soil water content. The study concluded that the crop rotations, the MWM and the MWS under the no-till coupled with the residue retention improved the soil porosity and the soil water content levels the most.

scholarly journals The Performance of the DES Sensor for Estimating Soil Bulk Density under the Effect of Different Agronomic Practices

Geosciences ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 117 ◽  
Author(s):  
Ahmed Abed Gatea Alshammary ◽  
Abbas Z. Kouzani ◽  
Akif Kaynak ◽  
Sui Yang Khoo ◽  
Michael Norton ◽  
...  
Keyword(s):  
Bulk Density ◽  
Soil Depth ◽  
Specific Energy Consumption ◽  
Strong Relationship ◽  
Soil Bulk Density ◽  
Electromechanical System ◽  
Soil Tillage ◽  
Tillage Systems ◽  
Agronomic Practices ◽  
Lack Of Information

The estimation of soil wet bulk density (ρn) and dry bulk density (ρb) using the novel digital electromechanical system (DES) has provided information about important parameters for the assessment of soil quality and health with a direct application for agronomists. The evaluation of the DES performance is particularly appropriate for different tillage methods, mulching systems, and fertilizers used to increase soil fertility and productivity, but currently, there is a lack of information, particularly in the arid areas in underdeveloped countries. Therefore, the main aim of this study was the application of a novel digital electromechanical system (DES) to evaluate bulk density, wet (ρn) and dry (ρb), under different soil treatments according to the variations in thermal efficiencies (ηth), microwave penetration depths (MDP), and specific energy consumption (Qcon) in an experimental area close to Baghdad (Iraq). The experimental design consisted of 72 plots, each 4 m2. The agronomic practices included two different tillage systems (disc plough followed by a spring disk and mouldboard plough followed by a spring disk) and twelve treatments involving mulching plastic sheeting combined with fertilizers, to determine their effect on the measured soil ρn and ρb and the DES performance in different soils. The results indicated that soil ρn and ρb varied significantly with both the tillage systems and the mulching systems. As expected, the soil ρn and ρb, MDP, and Qcon increased with an increase in the soil depth. Moreover, the tillage, soil mulching, and soil depth value significantly affected ηth and Qcon. A strong relationship was identified between the soil tillage and MDP for different soil treatments, leading to the changes in soil ρb and the soil dielectric constant (ε’).

SOIL BULK DENSITY ESTIMATION FOR TILLAGE SYSTEMS AND SOIL TEXTURES

1998 ◽  
Vol 41 (6) ◽  
pp. 1601-1610 ◽  
Author(s):  
Y. Chen ◽  
S. Tessier ◽  
J. Rouffignat
Keyword(s):  
Bulk Density ◽  
Density Estimation ◽  
Soil Bulk Density ◽  
Tillage Systems

scholarly journals Penetration resistance according to penetration rate, cone base size and different soil conditions

Bragantia ◽  
2014 ◽  
Vol 73 (2) ◽  
pp. 171-177 ◽  
Author(s):  
Daniel Dias Valadão Junior ◽  
Aloísio Biachini ◽  
Franciele Caroline Assis Valadão ◽  
Rodrigo Pengo Rosa
Keyword(s):  
Bulk Density ◽  
Penetration Rate ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Soil Conditions ◽  
Density Reduction ◽  
Soil Penetration Resistance ◽  
Base Size ◽  
The Relationship ◽  
Resistance To Penetration

This study aimed to evaluate the effect of penetration rate and the size of the cone base on the resistance to penetration under different soil moistures and soil bulk density. The experimental design was completely randomized in a 4x2x2x2 factorial arrangement, with the factors, soil bulk density of 1.0; 1.2; 1.4 and 1.6 Mg m-3, soil moisture at the evaluation of 0.16 and 0.22 kg kg-1, penetration rates of 0.166 and 30 mm s-1 and areas of the cone base of 10.98 and 129.28 mm² resulting in 32 treatments with 8 replicates. To ensure greater uniformity and similarity to field conditions, samples passed through cycles of wetting and drying. Only the interaction of the four factors was not significant. Resistance values varied with the density of the soil, regardless of moisture and penetration rate. Soil penetration resistance was influenced by the size of the cone base, with higher values for the smallest base independent of moisture and soil bulk density. The relationship between resistance to penetration and moisture is not always linear, once it is influenced by soil bulk density. Reduction in the area of the cone leads to an increase in the soil resistance to penetration.

scholarly journals Soil Bulk Density and Potato Tuber Yield as Influenced by Tillage Systems and Working Depths

2014 ◽  
Vol 4 (2) ◽  
pp. 046-051 ◽  
Author(s):  
K Abrougui ◽  
◽  
S Chehaibi ◽  
H.H Boukhalfa ◽  
I Chenini ◽  
...  
Keyword(s):  
Potato Tuber ◽  
Bulk Density ◽  
Tuber Yield ◽  
Soil Bulk Density ◽  
Tillage Systems

scholarly journals Effects of tillage on soil physical properties and root growth of maize in loam and clay in central China  

2013 ◽  
Vol 59 (No. 7) ◽  
pp. 295-302 ◽  
Author(s):  
B. Ji ◽  
Y. Zhao ◽  
X. Mu ◽  
K. Liu ◽  
C. Li
Keyword(s):  
Root Growth ◽  
Water Content ◽  
Bulk Density ◽  
Root Length ◽  
Root Length Density ◽  
Penetration Resistance ◽  
Soil Bulk Density ◽  
Conventional Tillage ◽  
Central China ◽  
Deep Tillage

Subsoil compaction can result in unfavourable soil physical conditions and hinder the root growth of maize. The effects of deep tillage and conventional tillage on soil physical properties and root growth of maize were studied during 2010&ndash;2011 at two sites (loam at Hebi and clay at Luohe) in central China. The results showed that soil penetration resistance, bulk density, water content and root length density were significantly affected by tillage, soil depth and year. Deep tillage had lower penetration resistance and lower soil bulk density, but higher soil water content than conventional tillage across years and depths. Averaged over the whole soil profile, deep tillage not only significantly decreased penetration resistance and soil bulk density, but significantly increased soil water content and root length density on loam, while deep tillage only significantly increased the root length density on clay. We conclude that deep tillage on the loam is more suitable for the root growth of summer maize.

Sign in / Sign up

Export Citation Format

Share Document