scholarly journals Numerical Simulation of a Three-Dimensional Fish-like Body Swimming with Finlets

2012 ◽  
Vol 11 (4) ◽  
pp. 1323-1333 ◽  
Author(s):  
Shizhao Wang ◽  
Xing Zhang ◽  
Guowei He
Keyword(s):  
Three Dimensional ◽  
The Body ◽  
Hydrodynamic Performance ◽  
Rectangular Plates ◽  
Caudal Peduncle ◽  
Local Flow ◽  
Vortical Structures ◽  
Numerical Result ◽  
Simulation Based ◽  
3D Fish

AbstractThe swimming of a 3D fish-like body with finlets is numerically investigated at Re = 1000 (the Reynolds number is based on the uniform upstream flow and the length of the fish-like body). The finlets are simply modeled as thin rigid rectangular plates that undulate with the body. The wake structures and the flow around the caudal peduncle are studied. The finlets redirect the local flow across the caudal peduncle but the vortical structures in the wake are almost not affected by the finlets. Improvement of hydrodynamic performance has not been found in the simulation based on this simple model. The present numerical result is in agreement with that of the work of Nauen and Lauder [J. Exp. Biol., 204 (2001), pp. 2251-2263] and partially supports the hypothesis of Webb [Bull. Fish. Res. Bd. Can., 190 (1975), pp. 1-159].

Locomotion in scombrid fishes: visualization of flow around the caudal peduncle and finlets of the chub mackerel Scomber japonicus

2001 ◽  
Vol 204 (13) ◽  
pp. 2251-2263 ◽  
Author(s):  
Jennifer C. Nauen ◽  
George V. Lauder
Keyword(s):  
Laser Light ◽  
Light Sheet ◽  
Flow Speed ◽  
The Body ◽  
Scomber Japonicus ◽  
Laser Light Sheet ◽  
Chub Mackerel ◽  
Caudal Peduncle ◽  
Local Flow ◽  
Scombrid Fishes

SUMMARY Scombrid fishes are known for high-performance locomotion; however, few data are available on scombrid locomotor hydrodynamics. In this paper, we present flow visualization data on patterns of water movement over the caudal peduncle and finlets (small fins on the dorsal and ventral body margin anterior to the caudal fin). Chub mackerel, Scomber japonicus, ranging in fork length from 20 to 26 cm, swam steadily at 1.2forklengthss−1 in a recirculating flow tank. Small, reflective particles in the flow tank were illuminated by a vertical (xy) or horizontal (xz) laser light sheet. Patterns of flow in the region near the caudal peduncle were measured using digital particle image velocimetry. Patterns of flow along the peduncle and finlets were quantified using manual particle tracking; more than 800 particles were tracked for at least 12ms over a series of tailbeats from each of four fish. In the vertical plane, flow trajectory and flow speed were independent of the position of the finlets, indicating that the finlets did not redirect flow or affect flow speed. Along, above and below the trailing surface of the peduncle, where the finlets were oriented along the peduncular surface, flow was convergent. Along, above and below the leading surface of the peduncle, where the finlets were absent, the flow trajectory was effectively horizontal. The lack of divergent flow on the leading surface of the peduncle is consistent with cross-peduncular flow formed by the lateral motion of the peduncle interacting with convergent flow resulting from forward movement of the body. In the horizontal plane, particles illuminated by the xz light sheet situated approximately 3 mm below the ventral body surface were tracked within the laser light sheet for up to 40ms, indicating strong planar flow. As the peduncle decelerates, the most posterior finlet is frequently at an angle of attack of at least 20° to the incident flow, but this orientation does not result in thrust production from lift generation. Finlet 5 does redirect cross-peduncular flow and probably generates small vortices undetectable in this study. These data are the first direct demonstration that the finlets have a hydrodynamic effect on local flow during steady swimming.

Force and power of flapping plates in a fluid

2012 ◽  
Vol 712 ◽  
pp. 598-613 ◽  
Author(s):  
Gao-Jin Li ◽  
Xi-Yun Lu
Keyword(s):  
Dynamic Analysis ◽  
Numerical Solutions ◽  
Vortical Structure ◽  
Three Dimensional ◽  
The Body ◽  
Vortical Structures ◽  
Ring Model ◽  
Essential Properties ◽  
Physical Insight ◽  
Insight Into

AbstractThe force and power of flapping plates are studied by vortex dynamic analysis. Based on the dynamic analysis of the numerical results of viscous flow past three-dimensional flapping plates, it is found that the force and power are strongly dominated by the vortical structures close to the body. Further, the dynamics of the flapping plate is investigated in terms of viscous vortex-ring model. It is revealed that the model can reasonably reflect the essential properties of the ring-like vortical structure in the wake, and the energy of the plate transferred to the flow for the formation of each vortical structure possesses a certain relation. Moreover, simplified formulae for the thrust and efficiency are proposed and verified to be reliable by the numerical solutions and experimental measurements of animal locomotion. The results obtained in this study provide physical insight into the understanding of the dynamic mechanisms relevant to flapping locomotion.

The Role of the Hand During Freestyle Swimming

2015 ◽  
Vol 137 (11) ◽  
Author(s):  
Raymond C. Z. Cohen ◽  
Paul W. Cleary ◽  
Bruce R. Mason ◽  
David L. Pease
Keyword(s):  
Fluid Model ◽  
Three Dimensional ◽  
The Body ◽  
Cfd Modeling ◽  
Vortical Structures ◽  
Video Footage ◽  
Particle Hydrodynamics ◽  
Smoothed Particle ◽  
Computational Fluid Dynamics Cfd ◽  
Lift And Drag

The connections between swimming technique and the fluid dynamical interactions they generate are important for assisting performance improvement. Computational fluid dynamics (CFD) modeling provides a controlled and unobtrusive way for understanding the fundamentals of swimming. A coupled biomechanical–smoothed particle hydrodynamics (SPH) fluid model is used to analyze the thrust and drag generation of a freestyle swimmer. The swimmer model was generated using a three-dimensional laser body scan of the athlete and digitization of multi-angle video footage. Two large distinct peaks in net streamwise thrust are found during the stroke, which coincide with the underwater arm strokes. The hand motions generate vortical structures that travel along the body toward the kicking legs and the hands are shown to produce thrust using both lift and drag. These findings advance understanding of the freestyle stroke and may be used to improve athlete technique.

Hydrodynamics and Flow Characterization of Tuna-Inspired Propulsion in Forward Swimming

2019 ◽  
Author(s):  
Junshi Wang ◽  
Huy Tran ◽  
Martha Christino ◽  
Carl White ◽  
Joseph Zhu ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Underwater Vehicle ◽  
Numerical Approach ◽  
Primary Objective ◽  
Computational Effort ◽  
The Body ◽  
Hydrodynamic Performance ◽  
Immersed Boundary ◽  
Ring Structures

Abstract A combined experimental and numerical approach is employed to study the hydrodynamic performance and characterize the flow features of thunniform swimming by using a tuna-inspired underwater vehicle in forward swimming. The three-dimensional, time-dependent kinematics of the body-fin system of the underwater vehicle is obtained via a stereo-videographic technique. A high-fidelity computational model is then directly reconstructed based on the experimental data. A sharp-interface immersed-boundary-method (IBM) based incompressible flow solver is employed to compute the flow. The primary objective of the computational effort is to quantify the thrust performance of the model. The body kinematics and hydrodynamic performances are quantified and the dynamics of the vortex wake are analyzed. Results have shown significant leading-edge vortex at the caudal fin and unique vortex ring structures in the wake. The results from this work help to bring insight into understanding the thrust producing mechanism of thunniform swimming and to provide potential suggestions in improving the hydrodynamic performance of swimming underwater vehicles.

Five Years of Numerical Naval Ship Hydrodynamics at DTNSRDC

1981 ◽  
Vol 25 (04) ◽  
pp. 219-235
Author(s):  
Nils Salvesen
Keyword(s):  
Free Surface ◽  
Numerical Methods ◽  
Initial Period ◽  
Three Dimensional ◽  
Hydrodynamic Performance ◽  
Ship Motions ◽  
Surface Boundary ◽  
Local Flow ◽  
Ship Hydrodynamics ◽  
Naval Ship

In 1974 the Numerical Naval Ship Hydrodynamics Program was established at the David W. Taylor Naval Ship Research and Development Center. The objective of the program is to develop new numerical methods which can be used to evaluate those hydrodynamic performance characteristics which cannot be satisfactorily predicted by traditional methods. In this paper, the accomplishments during the first five-year period (1974–1979) are discussed. During this initial period, the effort was devoted entirely to naval ship free-surface problems. Several successful methods have been developed for solving fully three-dimensional ship-motions, ship-wave-resistance and local-flow problems using linearized free-surface boundary conditions. Numerical methods have also been developed for unsteady and steady two-dimensional problems where the exact free-surface conditions are satisfied. These new numerical methods are more accurate than the conventional computational methods and they can be used to analyze several naval free-surface problems which previously could only be investigated experimentally. It is concluded that the Numerical Naval Ship Hydrodynamics Program should include consideration of all areas in naval ship hydrodynamics where it is believed that the application of advanced numerical techniques and computers can result in better solution techniques.

Vortex force decomposition in the tip region of impulsively-started flat plates

2014 ◽  
Vol 756 ◽  
pp. 758-770 ◽  
Author(s):  
Jochen Kriegseis ◽  
David E. Rival
Keyword(s):  
Particle Tracking Velocimetry ◽  
Three Dimensional ◽  
Velocity Fields ◽  
The Body ◽  
Flat Plates ◽  
Impulsive Motion ◽  
Vortical Structures ◽  
Low Aspect Ratio ◽  
Force Moment ◽  
Force Decomposition

AbstractAn investigation into the influence of seemingly analogous kinematics (plunge versus tow) for rapidly accelerating, low-aspect-ratio plates has been performed. The instantaneous forces and velocity fields were obtained simultaneously using a six-component force/moment sensor together with a three-dimensional particle tracking velocimetry (3D-PTV) system. Despite identical effective shear-layer velocities and effective angles of attack, the force histories are found to vary between the two aforementioned cases (plunge versus tow) once the impulsive motion is complete, as originally reported on by Kriegseis et al. (J. Fluid Mech., vol. 736, 2013, pp. 91–106). In order to uncover the cause for this curious discrepancy between the two analogous cases a vortex force decomposition is implemented. It is shown that the interplay between growth and orientation of the vortical structures significantly affects vortical hydrodynamic impulse and vortex force, and thus the net lift on the body.

The Influence of Viscous Effects on the Motion of a Body Floating in Waves

1993 ◽  
Vol 115 (1) ◽  
pp. 40-45 ◽  
Author(s):  
M. J. Downie ◽  
J. M. R. Graham ◽  
X. Zheng
Keyword(s):  
Three Dimensional ◽  
Vortex Method ◽  
Inviscid Flow ◽  
The Body ◽  
Viscous Effects ◽  
Local Flow ◽  
Discrete Vortex ◽  
Outer Flow ◽  
Viscous Forces ◽  
Singularity Distribution

This paper describes a method for calculating the forces experienced by a body floating in waves, including those due to vortex shedding from its surface. The method uses a purely theoretical approach, incorporating viscous forces, for calculating the motions of the body in the frequency domain. It involves the matching of an outer inviscid flow with the local flow in the regions of flow separation on the body, which must be well defined. The outer flow is computed by a three-dimensional singularity distribution technique and the inner flow by the discrete vortex method. The technique has been applied to the prediction of the motion response of barges floating in waves. The results compare favorably with experimental data.

Three-Dimensional Analytical Solution for Hybrid Multilayered Piezoelectric Plates

1999 ◽  
Vol 67 (3) ◽  
pp. 558-567 ◽  
Author(s):  
S. S. Vel ◽  
R. C. Batra
Keyword(s):  
Analytical Solution ◽  
Boundary Conditions ◽  
Three Dimensional ◽  
Laminated Plates ◽  
The Body ◽  
Rectangular Plates ◽  
Laminated Plate ◽  
Various Boundary Conditions ◽  
Linear Piezoelectricity ◽  
Piezoelectric Plates

Analytical solutions for the static three-dimensional deformations of multilayered piezoelectric rectangular plates are obtained by using the Eshelby-Stroh formalism. The laminated plate consists of homogeneous elastic or piezoelectric laminae of arbitrary thicknesses. The equations of static, linear, piezoelectricity are exactly satisfied at every point in the body. The analytical solution is in terms of an infinite series; the continuity conditions at the interfaces and boundary conditions at the edges are used to determine the coefficients. The formulation admits different boundary conditions at the edges and is applicable to thick and thin laminated plates. Results are presented for thick piezoelectric plates with two opposite edges simply supported and the other two subjected to various boundary conditions. [S0021-8936(00)01803-1]

Scanning electron microscopy of freeze-fractured prescapular lymph node of caprine

1984 ◽  
Vol 42 ◽  
pp. 244-245
Author(s):  
O. Faroon ◽  
F. Al-Bagdadi ◽  
T. G. Snider ◽  
C. Titkemeyer
Keyword(s):  
Lymph Node ◽  
Lymph Nodes ◽  
Lymphatic System ◽  
Three Dimensional ◽  
Meat Products ◽  
The Body ◽  
Morphological Data ◽  
The World ◽  
Cellular Constituent ◽  
Scanning Electron

The lymphatic system is very important in the immunological activities of the body. Clinicians confirm the diagnosis of infectious diseases by palpating the involved cutaneous lymph node for changes in size, heat, and consistency. Clinical pathologists diagnose systemic diseases through biopsies of superficial lymph nodes. In many parts of the world the goat is considered as an important source of milk and meat products.The lymphatic system has been studied extensively. These studies lack precise information on the natural morphology of the lymph nodes and their vascular and cellular constituent. This is due to using improper technique for such studies. A few studies used the SEM, conducted by cutting the lymph node with a blade. The morphological data collected by this method are artificial and do not reflect the normal three dimensional surface of the examined area of the lymph node. SEM has been used to study the lymph vessels and lymph nodes of different animals. No information on the cutaneous lymph nodes of the goat has ever been collected using the scanning electron microscope.

Clinical Utility of an Exoskeleton Robot Using 3-Dimensional Scanner Modeling in Burn Patient: A Case Report

2021 ◽  
Author(s):  
So Young Joo ◽  
Seung Yeol Lee ◽  
Yoon Soo Cho ◽  
Sangho Yi ◽  
Cheong Hoon Seo
Keyword(s):  
Burn Injury ◽  
Hand Function ◽  
Three Dimensional ◽  
The Body ◽  
3D Technology ◽  
Early Management ◽  
3 Dimensional ◽  
Exoskeleton Robot ◽  
Physical Abilities ◽  
Upper Limb Dysfunction

Abstract Hands are the part of the body that are most commonly involved in burns, and the main complications are finger joint contractures and nerve injuries. Hypertrophic scarring cannot be avoided despite early management of acute hand burn injuries, and some patients may need application of an exoskeleton robot to restore hand function. To do this, it is essential to individualize the customization of the robot for each patient. Three-dimensional (3D) technology, which is widely used in the field of implants, anatomical models, and tissue fabrication, makes this goal achievable. Therefore, this report is a study on the usefulness of an exoskeleton robot using 3D technology for patients who lost bilateral hand function due to burn injury. Our subject was a 45-year-old man with upper limb dysfunction of 560 days after a flame and chemical burn injury, with resultant impairment of manual physical abilities. After wearing an exoskeleton robot made using 3D printing technology, he could handle objects effectively and satisfactorily. This innovative approach provided considerable advantages in terms of customization of size and reduction in manufacturing time and costs, thereby showing great potential for use in patients with hand dysfunction after burn injury.

Sign in / Sign up

Export Citation Format

Share Document