scholarly journals Ground Vegetation Diversity on Different Type of Riverbank Along Ciliwung River in Bogor City, West Java

2019 ◽  
Vol 26 (1) ◽  
pp. 35
Author(s):  
Amarizni Mosyaftiani ◽  
Kaswanto Kaswanto ◽  
Hadi Susilo Arifin
Keyword(s):  
Species Richness ◽  
Urban Landscape ◽  
Retaining Wall ◽  
Ground Vegetation ◽  
Vegetation Diversity ◽  
Landscape Plants ◽  
Different Types ◽  
The Difference ◽  
Total Species ◽  
Wall System

Ciliwung riverbank has been affected by settlement occupation. Both concrete and another retaining wall system have been built to avoid flood and erosion to the settlement that has existed adjacent to the river. Built environment as human disturbance can trigger the change of species richness of ground vegetation in the Ciliwung riverbank of Bogor City. The research objective is to study the difference of ground vegetation biodiversity in three different types of riverbank based on its condition: natural, semi-natural, and constructed riverbanks. Point method and photographic sampling are used. Five replications of a square metre plot at three transects were placed at four sites sampling along 250 m each from the three different types of riverbank. Images of the plots are trained using sample point to overcome the difficulties in the field observation and statistical analysis. The result discovered that species richness in the natural riverbank is significantly higher than in semi-natural and constructed riverbank. Yet, no significance of species richness is shown between semi-natural and constructed riverbank. Total species of ground vegetation that we found were 55 species. Each different type of riverbank has its own highest species coverage: Asystasia nemorum (55.00%) in the natural riverbank, Pilea nummulariifolia (33.07%) in the semi-natural riverbank, and Pogonatherum crinitum (52.80%) in the constructed riverbank. The study concluded that the construction in the riverbank largely altered the biodiversity of ground vegetation in the urban riverbank. The outcomes suggest that the remnant of natural riverbank in the urban landscape should be highly protected from urban development to preserve its biodiversity. Also, species found could be potentially developed as landscape plants to support urban river planning, design, and management.

DIVERSIDAD DE REPTILES DE LA LAGUNA EL QUELELE EN NAYARIT, MÉXICO

2015 ◽  
Vol 8 ◽  
Author(s):  
Juana Naggai Fuentes-Castrejón ◽  
Adrián Maldonado-Gasca
Keyword(s):  
Species Richness ◽  
Temporal Variation ◽  
Water Availability ◽  
Abundant Species ◽  
Spatial And Temporal Variation ◽  
Ecological Indices ◽  
Biological Value ◽  
Different Types ◽  
Total Species ◽  
Risk Categories

<p>Mexico is considered a megadiverse country, ranking second worldwide in reptile diversity. To determine the spatial and temporal variation of the reptile assemblage in El Quelele lagoon in Bahía de Banderas, Nayarit (20°43’N and 105° 17’W), we realized transects of 500 m<sup>2</sup> for three different types of vegetation (mangrove, marshes and thorn forest) during two seasons (Dry and Rainy), We calculate the ecological indices (Shannon, Simpson and Pielou) and the biological value index. We report 19 species, representing 21.5% of the total species reported in Nayarit. The most abundant species were <em>Anolis nebulosus</em>, <em>Holcosus undulata</em> and <em>Iguana iguana</em>. Four species (21%) are endemic to Mexico, and nine species (47%) are registered within at-risk categories. Mangroves had the highest species richness (13 spp.), followed by marshes (9 spp.) and finally the thorn forest (5 spp.). Diversity was highest during the dry season within mangroves (H’=2.93) and in the marshes (1-D=0.93), which may be related to water availability. This study provides a foundation for reptile conservation in this area.</p>

scholarly journals Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 354
Author(s):  
Tim Tofan ◽  
Rimantas Stonkus ◽  
Raimondas Jasevičius
Keyword(s):  
Mechanical Properties ◽  
Color Reproduction ◽  
Related Effect ◽  
Color Characteristics ◽  
Fabric Density ◽  
Different Types ◽  
The Difference ◽  
Printing Parameters ◽  
Linen Fabric

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

scholarly journals Embodied Energy Optimization of Buttressed Earth-Retaining Walls with Hybrid Simulated Annealing

2021 ◽  
Vol 11 (4) ◽  
pp. 1800
Author(s):  
David Martínez-Muñoz ◽  
José V. Martí ◽  
José García ◽  
Víctor Yepes
Keyword(s):  
Retaining Wall ◽  
Cost Optimization ◽  
Energy Optimization ◽  
Optimization Criterion ◽  
Embodied Energy ◽  
Economic Optimization ◽  
Hybrid Simulated Annealing ◽  
The Difference ◽  
Reduce Emissions ◽  
Geometric Variables

The importance of construction in the consumption of natural resources is leading structural design professionals to create more efficient structure designs that reduce emissions as well as the energy consumed. This paper presents an automated process to obtain low embodied energy buttressed earth-retaining wall optimum designs. Two objective functions were considered to compare the difference between a cost optimization and an embodied energy optimization. To reach the best design for every optimization criterion, a tuning of the algorithm parameters was carried out. This study used a hybrid simulated optimization algorithm to obtain the values of the geometry, the concrete resistances, and the amounts of concrete and materials to obtain an optimum buttressed earth-retaining wall low embodied energy design. The relation between all the geometric variables and the wall height was obtained by adjusting the linear and parabolic functions. A relationship was found between the two optimization criteria, and it can be concluded that cost and energy optimization are linked. This allows us to state that a cost reduction of €1 has an associated energy consumption reduction of 4.54 kWh. To achieve a low embodied energy design, it is recommended to reduce the distance between buttresses with respect to economic optimization. This decrease allows a reduction in the reinforcing steel needed to resist stem bending. The difference between the results of the geometric variables of the foundation for the two-optimization objectives reveals hardly any variation between them. This work gives technicians some rules to get optimum cost and embodied energy design. Furthermore, it compares designs obtained through these two optimization objectives with traditional design recommendations.

scholarly journals Can clearcuts increase bird species richness in managed forests?

2008 ◽  
Vol 54 (No. 4) ◽  
pp. 189-193
Author(s):  
M. Żmihorski
Keyword(s):  
Species Richness ◽  
Bird Species ◽  
Bird Communities ◽  
Cumulative Number ◽  
Managed Forests ◽  
Managed Forest ◽  
Bird Species Richness ◽  
Forest Interior ◽  
Transect Counts ◽  
The Difference

Clearcuts are one of the results of forest management. The aim of this study was to assess the effect of clearcuts on bird communities in a managed forest in Western Poland. I applied the method of point transect counts. 20 points were located near clearcuts (less than 100 m from the nearest clearcut) and 25 points in the forest interior. In total, 36 bird species were recorded. On average, I found 9.20 bird species at points located near clearcuts and 6.72 species at points situated in the forest interior, and the difference was significant. The cumulative number of bird species for a given number of sampling points in the vicinity of clearcuts was higher than in the forest interior. The obtained results indicate that in managed, even-aged forests the generation of clearcuts can lead to an increase in local bird species richness.

scholarly journals Evaluation of Wear Behaviour in Metallic Binders Employed in Diamond Tools for Cutting Stone

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3988
Author(s):  
Fátima Ternero ◽  
Pedro M. Amaral ◽  
Jorge Cruz Fernandes ◽  
Luís Guerra Rosa
Keyword(s):  
Wear Behavior ◽  
Wear Behaviour ◽  
Empirical Expression ◽  
Testing Conditions ◽  
Diamond Tools ◽  
Test Methodology ◽  
Different Types ◽  
Stone Material ◽  
The Difference ◽  
Wear Tests

A type of disc-on-plate test methodology was used to determine the wear behavior of metallic binders employed in the manufacturing of diamond impregnated tools. The disc consists of a special circular wheel that allows the binder materials alone (i.e., without diamond, but sintered under conditions identical to those of the complete tool) to be tested against a plate of stone material under pre-determined testing conditions. The testing conditions are intended to be equivalent to those used in the industrial processes. Using plates of five types of granite and one type of marble, this work comprises wear tests of 15 different types of metallic binders and two sintering modes conducted under, at least, three different values of contact-force. The analysis of the results demonstrated that the wear of the binders can be related to their mechanical properties through an empirical expression. The larger the difference between the characteristics of the tribological pair (binder versus stone), the higher is the correlation between the experimental wear data and the values given by the empirical expression. The relationships presented in this work allow predicting the wear behavior of the binder, and therefore may help in the design process of diamond tools. There was a clear difference between the wear behavior of metallic binders when they were employed against the two main classes of stone under analysis (marble and granite).

Partial cutting reduces species richness of fungi on woody debris in oak-rich forests

2008 ◽  
Vol 38 (7) ◽  
pp. 1807-1816 ◽  
Author(s):  
Björn Nordén ◽  
Frank Götmark ◽  
Martin Ryberg ◽  
Heidi Paltto ◽  
Johan Allmér
Keyword(s):  
Species Richness ◽  
Woody Debris ◽  
Basal Area ◽  
Fruiting Bodies ◽  
Partial Cutting ◽  
Total Species Richness ◽  
Before And After ◽  
Closed Canopy ◽  
And Control ◽  
Total Species

Partial cutting is increasingly applied in European temperate oak-dominated forests for biofuel harvesting, and to counteract succession in protected stands. Effects on biodiversity of these measures need to be carefully evaluated, and species-rich but neglected taxa such as fungi should be considered. We studied the effects of partial cutting on fungal fruiting bodies on woody debris. In 21 closed canopy forests rich in large oaks in Sweden, on average 25%–30% of the basal area was cut. Fruiting bodies were counted and some were collected in treated and control plots before and after treatment. We found 334 basidiomycete and 47 ascomycete species. Species richness of basidiomycetes declined significantly more in treated plots (on average 26%) than in control plots (on average 13%) between seasons. Species richness of ascomycetes increased by 17% in control plots and decreased by 2% in treated plots. Total species richness was significantly reduced on fine woody debris (1–10 cm in diameter), but not on coarse woody debris (>10 cm). Overall species composition did not change significantly as a result of partial cutting, but red-listed species tended to decrease more in treated plots. We suggest that approximately 30% of the stands should not be thinned, and dead stems and fallen branches should not be removed, to favor saproxylic fungi and their associated fauna.

scholarly journals Fish species diversity in headwaters streams of Paraguay and Paraná Basins

2007 ◽  
Vol 50 (6) ◽  
pp. 1033-1042 ◽  
Author(s):  
Yzel Rondon Súarez ◽  
Sabrina Bigatão Valério ◽  
Karina Keyla Tondado ◽  
Alexandro Cezar Florentino ◽  
Thiago Rota Alves Felipe ◽  
...  
Keyword(s):  
Species Richness ◽  
Species Diversity ◽  
Environmental Factors ◽  
Fish Species ◽  
Total Species Richness ◽  
Paraná Basin ◽  
Parana Basin ◽  
Number Of Individuals ◽  
Total Species ◽  
Fish Species Diversity

The influence of spatial, temporal and environmental factors on fish species diversity in headwater streams in Paraguay and Paraná basins, Brazil was examined. A total of 4,605 individuals were sampled, distributed in 60 species. The sampled streams in Paraná basin presented a larger total species richness (42) than Paraguay streams (40). However the estimated richness was larger in Paraguay basin (53) than Paraná streams (50). The streams of Paraná basin had a greater mean species richness and evenness, while more individuals per sample were found in the Paraguay basin. Difference between the sub-basins were found in the Paraguay basin, while for the basin of Paraná, richness and evenness vary significantly between the sub-basins, but the number of individuals varied seasonally. The most important environmental factors to species diversity and abundance were altitude, water temperature, stream width and stream depth for both the basins.

scholarly journals Increased mosquito abundance and species richness in Connecticut, United States 2001–2019

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Tanya A. Petruff ◽  
Joseph R. McMillan ◽  
John J. Shepard ◽  
Theodore G. Andreadis ◽  
Philip M. Armstrong
Keyword(s):  
United States ◽  
Species Richness ◽  
Community Composition ◽  
Pathogen Transmission ◽  
Public Health Importance ◽  
Data Set ◽  
Mosquito Abundance ◽  
Total Species Richness ◽  
Multiple Species ◽  
Total Species

Abstract Historical declines in multiple insect taxa have been documented across the globe in relation to landscape-level changes in land use and climate. However, declines have either not been universally observed in all regions or examined for all species. Because mosquitoes are insects of public health importance, we analyzed a longitudinal mosquito surveillance data set from Connecticut (CT), United States (U.S.) from 2001 to 2019 to identify changes in mosquito community composition over time. We first analyzed annual site-level collections and metrics of mosquito community composition with generalized linear/additive mixed effects models; we also examined annual species-level collections using the same tools. We then examined correlations between statewide collections and weather variables as well as site-level collections and land cover classifications. We found evidence that the average trap night collection of mosquitoes has increased by ~ 60% and statewide species richness has increased by ~ 10% since 2001. Total species richness was highest in the southern portion of CT, likely due to the northward range expansion of multiple species within the Aedes, Anopheles, Culex, and Psorophora genera. How the expansion of mosquito populations in the northeast U.S. will alter mosquito-borne pathogen transmission in the region will require further investigation.

Sign in / Sign up

Export Citation Format

Share Document