scholarly journals Hygiene quality of traditional and industrial table olives from markets in Rabat-Salé and Temara cities in Morocco

2021 ◽  
Vol 22 (1) ◽  
pp. 88-92
Author(s):  
Z. Mennane ◽  
I. Houlali ◽  
R. Charof ◽  
J. Abrini ◽  
N. Elmtili

Background: Table olives are one of the most important vegetable canning products in Morocco, which is considered one of the world's largest producing countries. Currently, many outlets prepare table olives by different methods that do not comply with standard hygiene practices. Hence, this research was conducted to assess the quality standard of these olives by evaluating their physico-chemical and microbiological properties.Methodology: A total of 108 samples of table olives (pitted green olives and blacks) obtained from Rabat-Salé and Rabat-Temara markets in Morocco were evaluated. Physico-chemical properties of the olives including pH, oxido-reduction potential (ORP) and titrable acidity were determined using the analytical methods of the Association of Official Analytical Chemists (AOAC). Microbiological analyses including standard plate count (SPC) for total aerobic mesophilic flora (TAMB), total coliforms (TC), faecal coliforms (FC), yeasts, clostridia, Staphylococcus aureus, faecal streptococci and salmonella counts, were performed using standard microbiological methods. The identification of yeast isolates was carried out with the commercial API 20C biochemical identification kit.Results: The average microbial loads for traditional olive samples were 3.2x106 CFU/ml for SPC, 1.7x104 CFU/ml for TC, 8.7x103 CFU/ml for FC, and 2.5x106 CFU/ml for yeast, which were higher compared to the average microbial loads of industrial olives with values of 5.9x105 CFU/ml, 5x101 CFU/ml, 0 CFU/ml and 0 CFU/ml respectively. One hundred percent (56 of 56) of the traditional olives (pitted green and black) from Temara-Rabatmarkets were contaminated with coliforms while 50% of green and 65% of black olives in Salé-Rabat were contaminated with coliforms. Five percent (5%) each of the traditional green and black olives in Salé-Rabat markets were contaminated with clostridia (spore forming bacteria). No FC or other bacteria and yeasts were present in the industrial olives, and none of the olives was contaminated with S. aureus, faecal streptococci and salmonella. Of the total of 8 yeast strains isolated from the traditional olives, 4 (50%) were Candida guilliermondii, 2 (25%) Candida lusitaniae and 2 (25%) Candida famata.Conclusion: The contamination of olive oil products may be due to different sources such as water, processing materials, storage condition, cleaning, labour and others. There is need for increase awareness and control of these at the points of sale of these traditional olives. Keywords: hygiene; physico-chemical properties; microbiology; traditional olives; quality   French Title: Qualité Hygiène des olives de table traditionnelles et industrielles des marchés des villes de Rabat-Salé et Témara au Maroc Contexte: Les olives de table sont l'un des produits de mise en conserve de légumes les plus importants au Maroc, qui est considéré comme l'un des plus grands pays producteurs du monde. Actuellement, de nombreux points de vente préparent les olives de table par différentes méthodes non conformes aux pratiques d'hygiène standard. Ainsi, cette recherche a été menée pour évaluer le standard de qualité de ces olives en évaluant leurs propriétés physico-chimiques et microbiologiques.Méthodologie: Un total de 108 échantillons d'olives de table (olives vertes dénoyautées et noires) obtenus sur les marchés de Rabat-Salé et Rabat-Témara au Maroc ont été évalués. Les propriétés physico-chimiques des olives, y compris le pH, le potentiel d'oxydoréduction (ORP) et l'acidité titrable ont été déterminées en utilisant les méthodes analytiques de l'Association of Official Analytical Chemists (AOAC). Les analyses microbiologiques, y compris la numération sur plaque standard (SPC) pour la flore mésophile aérobie totale (FMAT), les coliformes totaux (CT), les coliformes fécaux (CF), les levures, les clostridies, Staphylococcus aureus, les streptocoques fécaux et les numérations de salmonelles, ont été effectuées à l'aide de méthodes microbiologiques standard. L'identification des isolats de levure a été réalisée avec le kit d'identification biochimique API 20E du commerce.Résultats: Les charges microbiennes moyennes pour les échantillons d'olives traditionnelles étaient de 3,2x106 UFC/ml pour le SPC, 1,7x104 UFC/ml pour le TC, 8,7x103 UFC/ml pour le FC et 2,5x106 UFC/ml pour la levure, qui étaient plus élevées par rapport aux charges microbiennes moyennes des olives industrielles avec des valeurs respectives de 5,9x105 UFC/ml, 5x101 UFC/ml, 0 UFC/ml et 0 UFC/ml. Cent pour cent (56 sur 56) des olivestraditionnelles (dénoyautées vertes et noires) des marchés de Témara-Rabat étaient contaminées par des coliformes tandis que 50% des olives vertes et 65% des olives noires de Salé-Rabat étaient contaminées par des coliformes. Cinq pour cent (5%) de chacune des olives vertes et noires traditionnelles des marchés de Salé-Rabat étaient contaminées par des clostridia (bactéries sporulantes). Aucune FC ni aucune autre bactérie et levure n'étaient présentes dans les olives industrielles, et aucune des olives n'était contaminée par S. aureus, des streptocoques fécaux et des salmonelles. Sur un total de 8 souches de levure isolées des olives traditionnelles, 4 (50%) étaient Candida guilliermondii, 2 (25%) Candida lusitaniae et 2 (25%) Candida famata.Conclusion: La contamination des produits à base d'huile d'olive peut être due à différentes sources telles que l'eau, les matériaux de traitement, les conditions de stockage, le nettoyage, la main-d'œuvre et autres. Il est nécessaire d'accroître la sensibilisation et le contrôle de ceux-ci dans les points de vente de ces olives traditionnelles. Mots-clés: hygiène; propriétés physico-chimiques; microbiologie; olives traditionnelles; qualité  

1992 ◽  
Vol 43 (3) ◽  
pp. 130-133 ◽  
Author(s):  
A. Asehraou ◽  
M. Faid ◽  
M. Jana

2016 ◽  
Vol 35 (3) ◽  
Author(s):  
M.R. Patil ◽  
C.D> Khedkar ◽  
S.D. Chavan ◽  
P.S. Patil

Twenty-five samples of spray dried whole milk powder (WMP) of different brands were procured from five regions of Maharashtra namely Vidarbha, North Maharashtra, Western Maharashtra, Marathwada and Mumbai. These samples were analyzed for the chemical composition, physico-chemical properties and microbiological quality to access their suitability in terms of national and international standards. The moisture, fat and protein content in WMP obtained from different regions varied significantly.Wide variation in the physical properties like scorched particles, wettability, dispersibility and solubility index was observed in WMP. The NPN, true protein content, titratable acidity and lactate content and free fat content of WMP samples were varied significantly. The standard plate count and coliform count of WMP samples were lower than that of the standard prescribed by BIS and PFA. In the present study except few, all the samples meet the requirements of national and international standards.


2016 ◽  
Vol 35 (4) ◽  
Author(s):  
M. R. Patil ◽  
C. D. Khedkar ◽  
C. D. Chavan ◽  
P. S. Patil

Twenty five market skim milk powder samples obtained from various regions of Maharashtra were analysed for their chemical composition, physico-chemical properties and microbiological quality to access their suitability in terms of national and international standards. It was observed that the moisture, fat, protein, lactose and ash content of SMP samples obtained from various regions showed significant difference (P less than 0.05). It was also revealed that the scorched particle content, solubility index, dispersibility, wettability properties of samples varied significantly in different regions for different brands. Similarly, the NPN and true protein content in SMP samples of different regions were significantly different from each other. The average free fat content in the samples from Vidarabha was significantly higher than that of the other regions of the state. The titratable acidity and lactate content of various brands of SMP samples were ranged from 0.97-1.08 and 75-550 mg/100 g, respectively. It was observed that three brands out of twenty five samples were found positive for alkali neutralizers. Wide variation was observed in standard plate count and coliform counts of all the SMP samples of various brands collected from five different regions of Maharashtra.


2019 ◽  
Vol 15 (2-1) ◽  
pp. 341-345
Author(s):  
Nurfarhana Syed Malik ◽  
Mohd Nizam Lani ◽  
Fauziah Tufail Ahmad

This study was done to determine the effect of pasteurization on the stability of lactic acid bacteria and its enzyme, and also its relation with physico-chemical properties in raw and pasteurized cow’s and goat’s milk. Most of the physico-chemical properties (pH, protein, ash and fat) were highest in pasteurized goat’s milk. The total viable count for plate count of the bacterial concentration was higher in both pasteurized cow’s and goat’s milk which were 2.48 log CFU/ml. This was followed by raw cow’s milk (1.59 log CFU/ml) and raw goat’s milk (0.65 log CFU/ml). There was no yeast and mould detected in both raw and pasteurized cow’s and goat’s milk, respectively. Lactic acid bacteria (LAB) was found significantly higher in raw milk compared to pasteurized milk and higher macronutrients (proximate composition) could be considered as one of the factors for the survival of LAB. Interestingly, based on API ZYM assay kit result, there were nine different enzymes were detected in all samples which were leucine arylamidase, valine arylamidase, cystine arylamidase, trypsin, α-chymotrypsin, naphthol-AS-BI-phosphohydrolase, α-glucosidase, β-glucosidase and acid phosphatise. This result revealed that different types of lactic acid bacteria were detected in treated and non-treated milk samples produced by different animals. 


Processes ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 697 ◽  
Author(s):  
Sok Fern Tan ◽  
Nyuk Ling Chin ◽  
Tuan Poy Tee ◽  
Sook Kuan Chooi

Industrial high-pressure processing (HPP) was conducted on cow and goat milk in comparison to conventional heat pasteurization. No significant changes were found in the physico-chemical properties of the treated milk except for pH, where pasteurized cow milk experienced a decrease while goat milk’s pH increased for both pasteurized and HPP treated. HPP-treated cow and goat milk both achieved microbial shelf life of 22 days at 8 °C storage with no increase in Bacillus cereus, mesophilic aerobic spores, coliform, yeast and mold but slight increase in psychrotrophic bacteria and total plate count. Pasteurized goat milk was spoilt at the end of storage with exceeding count of psychrotrophic bacteria (9.0 × 108 CFU/mL) and total plate count (3.5 × 108 CFU/mL). HPP-treated cow milk exhibited higher physico-chemical stability than goat milk as evidenced by non-significant change of titratable acidity but goat milk experienced an increase of 0.04% averagely.


Author(s):  
H. Gross ◽  
H. Moor

Fracturing under ultrahigh vacuum (UHV, p ≤ 10-9 Torr) produces membrane fracture faces devoid of contamination. Such clean surfaces are a prerequisite foe studies of interactions between condensing molecules is possible and surface forces are unequally distributed, the condensate will accumulate at places with high binding forces; crystallites will arise which may be useful a probes for surface sites with specific physico-chemical properties. Specific “decoration” with crystallites can be achieved nby exposing membrane fracture faces to water vopour. A device was developed which enables the production of pure water vapour and the controlled variation of its partial pressure in an UHV freeze-fracture apparatus (Fig.1a). Under vaccum (≤ 10-3 Torr), small container filled with copper-sulfate-pentahydrate is heated with a heating coil, with the temperature controlled by means of a thermocouple. The water of hydration thereby released enters a storage vessel.


1990 ◽  
Vol 63 (03) ◽  
pp. 499-504 ◽  
Author(s):  
A Electricwala ◽  
L Irons ◽  
R Wait ◽  
R J G Carr ◽  
R J Ling ◽  
...  

SummaryPhysico-chemical properties of recombinant desulphatohirudin expressed in yeast (CIBA GEIGY code No. CGP 39393) were reinvestigated. As previously reported for natural hirudin, the recombinant molecule exhibited abnormal behaviour by gel filtration with an apparent molecular weight greater than that based on the primary structure. However, molecular weight estimation by SDS gel electrophoresis, FAB-mass spectrometry and Photon Correlation Spectroscopy were in agreement with the theoretical molecular weight, with little suggestion of dimer or aggregate formation. Circular dichroism studies of the recombinant molecule show similar spectra at different pH values but are markedly different from that reported by Konno et al. (13) for a natural hirudin-variant. Our CD studies indicate the presence of about 60% beta sheet and the absence of alpha helix in the secondary structure of recombinant hirudin, in agreement with the conformation determined by NMR studies (17)


1963 ◽  
Vol 79 (2) ◽  
pp. 263-293 ◽  
Author(s):  
E.M. Savitskii ◽  
V.F. Terekhova ◽  
O.P. Naumkin

Sign in / Sign up

Export Citation Format

Share Document