scholarly journals A VLSI Implementation of a New Low Voltage 5th Order Differential Gm-C Low-Pass Filter with Auto-Tuning Loop in CMOS Technology

2011 ◽  
Vol 11 (1) ◽  
pp. 23-30 ◽  
Author(s):  
R. G. BOZOMITU ◽  
N. COJAN
Keyword(s):  
Low Voltage ◽  
Cmos Technology ◽  
Vlsi Implementation ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Low Pass ◽  
Auto Tuning

scholarly journals A 1-V 7th-Order SC Low-Pass Filter for 77-GHz Automotive Radar in 28-nm FD-SOI CMOS

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1466
Author(s):  
Alessandro Parisi ◽  
Giuseppe Papotto ◽  
Egidio Ragonese ◽  
Giuseppe Palmisano
Keyword(s):  
Low Voltage ◽  
Cmos Technology ◽  
Silicon On Insulator ◽  
Automotive Radar ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Low Pass ◽  
Radar Applications ◽  
77 Ghz ◽  
28 Nm

This paper presents a switched capacitor low-pass filter in a 28-nm fully depleted silicon on insulator CMOS technology for 77-GHz automotive radar applications. It is operated at a power supply as low as 1 V and guarantees 5-dB in-band voltage gain while providing out-of-band attenuation higher than 36 dB and a programmable passband up to 30 MHz. A double sampling technique is adopted, which allows high operating frequency to be achieved while saving power. Moreover, low-voltage biasing and common-mode feedback circuits are exploited to guarantee an almost rail-to-rail output voltage swing. The proposed filter provides an output 1-dB compression point as high as 8.7 dBm with a power consumption of 9 mW. To the authors’ knowledge, this is the first SC-based implementation of a low pass filter for automotive radar applications.

scholarly journals Ladder-Based Synthesis and Design of Low-Frequency Buffer-Based CMOS Filters

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2931
Author(s):  
Waldemar Jendernalik ◽  
Jacek Jakusz ◽  
Grzegorz Blakiewicz
Keyword(s):  
Dynamic Range ◽  
Low Voltage ◽  
Supply Voltage ◽  
Low Frequency ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Biomedical Sensors ◽  
Filter Synthesis ◽  
Cascade Method

Buffer-based CMOS filters are maximally simplified circuits containing as few transistors as possible. Their applications, among others, include nano to micro watt biomedical sensors that process physiological signals of frequencies from 0.01 Hz to about 3 kHz. The order of a buffer-based filter is not greater than two. Hence, to obtain higher-order filters, a cascade of second-order filters is constructed. In this paper, a more general method for buffer-based filter synthesis is developed and presented. The method uses RLC ladder prototypes to obtain filters of arbitrary orders. In addition, a set of novel circuit solutions with ultra-low voltage and power are proposed. The introduced circuits were synthesized and simulated using 180-nm CMOS technology of X-FAB. One of the designed circuits is a fourth-order, low-pass filter that features: 100-Hz passband, 0.4-V supply voltage, power consumption of less than 5 nW, and dynamic range above 60 dB. Moreover, the total capacitance of the proposed filter (31 pF) is 25% lower compared to the structure synthesized using a conventional cascade method (40 pF).

THE DIFFERENTIAL DIFFERENCE OPERATIONAL FLOATING AMPLIFIER: NEW CMOS REALIZATIONS AND APPLICATIONS

2009 ◽  
Vol 18 (07) ◽  
pp. 1287-1308 ◽  
Author(s):  
EMAN A. SOLIMAN ◽  
SOLIMAN A. MAHMOUD
Keyword(s):  
Analog Circuits ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Variable Gain Amplifiers ◽  
Variable Gain ◽  
Fully Differential ◽  
Filter Performance ◽  
Low Pass ◽  
Band Pass

This paper presents different novel CMOS realizations for the differential difference operational floating amplifier (DDOFA). The DDOFA was first introduced in Ref. 1 and was used to realize different analog circuits like integrators, filters and variable gain amplifiers. New CMOS realizations for the DDOFA are introduced in this literature. Furthermore the DDOFA is modified to realize a fully differential current conveyor (FDCC). Novel CMOS realizations of the FDCC are presented. The FDCC is used to realize second-order band pass–low-pass filter. Performance comparisons between the different realizations of the DDOFA and FDCC are given in this literature. PSPICE simulations of the overall proposed circuits are given using 0.25 μm CMOS Technology from TMSC MOSIS model and dual supply voltages of ±1.5 V.

scholarly journals Floating Active Inductor Based Trans-Impedance Amplifier in 0.18 μm CMOS Technology for Optical Applications

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1547
Author(s):  
Xiangyu Chen ◽  
Yasuhiro Takahashi
Keyword(s):  
Power Dissipation ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Chip Area ◽  
Active Inductors ◽  
Low Pass ◽  
Optical Applications ◽  
Fifth Order

In this paper, a transimpedance amplifier (TIA) based on floating active inductors (FAI) is presented. Compared with conventional TIAs, the proposed TIA has the advantages of a wider bandwidth, lower power dissipation, and smaller chip area. The schematics and characteristics of the FAI circuit are explained. Moreover, the proposed TIA employs the combination of capacitive degeneration, the broadband matching network, and the regulated cascode input stage to enhance the bandwidth and gain. This turns the TIA design into a fifth-order low pass filter with Butterworth response. The TIA is implemented using 0.18 μ m Rohm CMOS technology and consumes only 10.7 mW with a supply voltage of 1.8 V. When used with a 150 fF photodiode capacitance, it exhibits the following characteristics: gain of 41 dB Ω and −3 dB frequency of 10 GHz. This TIA occupies an area of 180 μ m × 118 μ m.

scholarly journals CMOS CDBA-Based Inverse Filter Structure

2020 ◽  
Vol 9 (3) ◽  
pp. 2226-2231
Keyword(s):  
Cmos Technology ◽  
Experimental Results ◽  
Band Pass Filter ◽  
Inverse Filter ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Filter Structure ◽  
Low Pass ◽  
Band Pass ◽  
High Pass

This paper presents a voltage-mode(VM) tunable multifunction inverse filter configuration employing current differencing buffered amplifiers (CDBA). The presented structure utilizes two CDBAs, two/three capacitors and four/five resistors to realize inverse low pass filter (ILPF), inverse high pass filter (IHPF), inverse band pass filter (IBPF), and inverse band reject filter(IBRF) from the same circuit topology by suitable selection(s) of the branch admittances(s). PSPICE simulations have been performed with 0.18µm TSMC CMOS technology to validate the theory. Some sample experimental results have also been provided using off-the-shelf IC AD844 based CDBA.

Sign in / Sign up

Export Citation Format

Share Document