KieranTimberlake – constructing a social energy modelling process

Author(s):  
Sonja Oliveira ◽  
Elena Marco ◽  
Bill Gething
2019 ◽  
Vol 111 ◽  
pp. 04024
Author(s):  
Brendan Banfield ◽  
Clayton McDowell ◽  
Duane A. Robinson ◽  
Ashish Agalgaonkar

The Solar Decathlon is an international competition that challenges collegiate teams from around the world to design and build functioning, sustainable, solar powered houses. The competition is split into ten sub-contests which vary from competition to competition. Contests are a combination of juried (judged by a panel experts) or measured (such as energy usage and thermal comfort) contests. This paper will focus on the measured contests, in particular; energy management, comfort conditions and house functioning. To ensure optimal house performance during the competition, extensive energy and thermal modelling is required to ensure the solar PV and on-site energy storage can achieve net-zero energy while also ensuring the heating, ventilation and air conditioning (HVAC) system can meet the strict indoor thermal comfort requirements set by the competition. This paper will review the energy and thermal modelling process of Team UOW Australia’s net-positive energy house, the ‘Desert Rose’, that achieved second place in the Solar Decathlon Middle East (SDME) competition in 2018. Upon reviewing the energy modelling process, the results from the energy simulations will be compared to the real data that was obtained during the SDME competition to determine the validity of the energy simulations and the subsequent benefits of in-depth energy modelling for competing in a Solar Decathlon.


Thermo ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 63-76
Author(s):  
Mengxuan Yan ◽  
Dongxiao Wang ◽  
Chun Sing Lai ◽  
Loi Lei Lai

Microgrids have become increasingly popular in recent years due to technological improvements, growing recognition of their benefits, and diminishing costs. By clustering distributed energy resources, microgrids can effectively integrate renewable energy resources in distribution networks and satisfy end-user demands, thus playing a critical role in transforming the existing power grid to a future smart grid. There are many existing research and review works on microgrids. However, the thermal energy modelling in optimal microgrid management is seldom discussed in the current literature. To address this research gap, this paper presents a detailed review on the thermal energy modelling application on the optimal energy management for microgrids. This review firstly presents microgrid characteristics. Afterwards, the existing thermal energy modeling utilized in microgrids will be discussed, including the application of a combined cooling, heating and power (CCHP) and thermal comfort model to form virtual energy storage systems. Current trial programs of thermal energy modelling for microgrid energy management are analyzed and some challenges and future research directions are discussed at the end. This paper serves as a comprehensive review to the most up-to-date thermal energy modelling applications on microgrid energy management.


2021 ◽  
Vol 35 ◽  
pp. 100650
Author(s):  
T. Niet ◽  
A. Shivakumar ◽  
F. Gardumi ◽  
W. Usher ◽  
E. Williams ◽  
...  

2021 ◽  
Vol 296 ◽  
pp. 117082
Author(s):  
Giovan Battista Cavadini ◽  
Lauren M. Cook

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2378
Author(s):  
Mertol Tüfekci ◽  
Sevgi Güneş Durak ◽  
İnci Pir ◽  
Türkan Ormancı Acar ◽  
Güler Türkoğlu Demirkol ◽  
...  

To investigate the effect of polyvinylpyrrolidone (PVP) addition and consequently porosity, two different sets of membranes are manufactured, since PVP is a widely used poring agent which has an impact on the mechanical properties of the membrane material. The first set (PAN 1) includes polyacrylonitrile (PAN) and the necessary solvent while the second set (PAN 2) is made of PAN and PVP. These membranes are put through several characterisation processes including tensile testing. The obtained data are used to model the static behaviour of the membranes with different geometries but similar loading and boundary conditions that represent their operating conditions. This modelling process is undertaken by using the finite element method. The main idea is to investigate how geometry affects the load-carrying capacity of the membranes. Alongside membrane modelling, their materials are modelled with representative elements with hexagonal and rectangular pore arrays (RE) to understand the impact of porosity on the mechanical properties. Exploring the results, the best geometry is found as the elliptic membrane with the aspect ratio 4 and the better RE as the hexagonal array which can predict the elastic properties with an approximate error of 12%.


1999 ◽  
Vol 16 (1-4) ◽  
pp. 1262-1267 ◽  
Author(s):  
Bent Sørensen ◽  
Peter Meibom

Sign in / Sign up

Export Citation Format

Share Document