scholarly journals The Natural Gas Addiction and Wood Energy Role in Latvia Today and Future

2021 ◽  
Vol 15 ◽  
pp. 29-33
Author(s):  
Ginta Cimdina ◽  
Andra Blumberga ◽  
Ivars Veidenbergs ◽  
Dagnija Blumberga ◽  
Aiga Barisa
Keyword(s):  
Fossil Fuel ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Efficiency Improvement ◽  
Wood Fuel ◽  
Eu Member States ◽  
Energy Efficiency Improvement ◽  
Wood Energy ◽  
Historical Pattern ◽  
Biomass Resources

The paper analyzes strategies for restricting Latvia’s dependence on fossil fuel imports in line with an increasing challenge to follow the leading EU Member States in greening the energy sector. Availability of local biomass resources ensures the necessary framework for building an arranged, environmentally and climate-friendly economy. Primary attention is paid to historical pattern of wood fuel use which shows reduction in wood fuel’s share of primary energy consumption, however energy efficiency improvement is not observed. A hypothesis for development of wood fuel consumption up to 2020 is proposed. Analysis indicates potential of reaching a 43% share of wood fuel in national energy mix by 2020.

scholarly journals Gini and Entropy-Based Spread Indexes for Primary Energy Consumption Efficiency and CO2 Emission

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4938
Author(s):  
Hellinton H. Takada ◽  
Celma O. Ribeiro ◽  
Oswaldo L. V. Costa ◽  
Julio M. Stern
Keyword(s):  
Energy Consumption ◽  
Co2 Emission ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
Primary Energy ◽  
Point Of View ◽  
Primary Energy Consumption ◽  
Policy Makers ◽  
Responsible Investment ◽  
Global Spread

Primary energy consumption is one of the key drivers of global CO2 emissions that, in turn, heavily depends on the efficiency of involved technologies. Either improvement in technology efficiency or the expansion of non-fossil fuel consumption requires large investments. The planning and financing of such investments by global policy makers or global energy firms require, in turn, reliable measures of associated global spread and their evolution in time, at least from the point of view of the principles for responsible investment (PRI). In this paper, our main contribution is the introduction of index measures for accessing global spread (that is, measures of inequality or inhomogeneity in the statistical distribution of a related quantity of interest) of technology efficiency and CO2 emission in primary energy consumption. These indexes are based on the Gini index, as used in economical sciences, and generalized entropy measures. Regarding primary energy sources, we consider petroleum, coal, natural gas, and non-fossil fuels. Between our findings, we attest some stable relations in the evolution of global spreads of technology efficiency and CO2 emission and a positive relation between changes in global spread of technology efficiency and use of non-fossil fuel.

scholarly journals Potentials and limitations of alternative fuels for diesel engine

2009 ◽  
Vol 13 (3) ◽  
pp. 175-183 ◽  
Author(s):  
Radinko Gligorijevic ◽  
Jeremija Jevtic ◽  
Djuro Borak ◽  
Velimir Petrovic
Keyword(s):  
Energy Consumption ◽  
Alternative Fuels ◽  
Fossil Fuel ◽  
Primary Energy ◽  
Pollutant Emission ◽  
Great Effort ◽  
Primary Energy Consumption ◽  
Transportation Fuels ◽  
2Nd Generation ◽  
Automotive Fuels

The primary energy consumption in the world has increased continuously. The most important primary energy source is oil. The supply of automotive fuels today is based almost entirely on oil, and the demand for liquid transportation fuels worldwide will rise significantly in the next fifty years. Growing energy consumption and decreasing fossil resources are reasons for increasing prices of fossil fuel. Besides limited availability, contribution to greenhouse effect and pollutant emission represent another problem of fossil fuel. Both of these problems can be overcome by increased application of renewable biofuels. Therefore, great effort is made to supplement the primary energy sources by including renewable energies. There are alternative fuels 1st and 2nd generation. Some of them show high potential for reduction of engine out emission. But there are economical and technical barriers when such fuels are applied. This paper shows both advantage and disadvantage of alternative fuels, especially when used for diesel engines.

scholarly journals Gini and Entropy Based Spread Indexes for Primary Energy Consumption Efficiency and CO2 Emission

2020 ◽  
Author(s):  
Hellinton H. Takada ◽  
Celma O. Ribeiro ◽  
Oswaldo L. V. Costa ◽  
Julio M. Stern
Keyword(s):  
Energy Consumption ◽  
Co2 Emission ◽  
Fossil Fuels ◽  
Fossil Fuel ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Policy Makers ◽  
Entropy Measures ◽  
Key Drivers ◽  
Measures Of Inequality

Primary energy consumption is one of the key drivers of global CO2 emissions that, in turn, heavily depend on the efficiency of involved technologies. Either the improvement in technology efficiency or the expansion of non-fossil fuel consumption require large investments. The planning and financing of such investments, by policy makers or global energy firms, require, in turn, reliable measures of associated global spreads and their evolution in time. In this paper, our main contribution is the introduction of index measures for accessing global spreads (that is, measures of inequality or inhomogeneity in the statistical distribution of a related quantity of interest) of technology efficiency and CO2 emission in primary energy consumption. These indexes are based on the Gini index, as used in economical sciences, and generalised entropy measures. Regarding primary energy sources, we consider petroleum, coal, natural gas and non-fossil fuels. Between our findings, we attest some stable relations in the evolution of global spreads of technology efficiency and CO2 emission, and a positive relation between changes in global spreads of technology efficiency and use of non-fossil fuel.

On Energy Status indicators and the role of renewableEnergy under Economic Crisis

2014 ◽  
pp. 92-105
Author(s):  
P. Bezrukikh ◽  
P. Bezrukikh (Jr.)
Keyword(s):  
Renewable Energy ◽  
World Economy ◽  
Electrical Energy ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Energy Status ◽  
Economy Growth ◽  
The World ◽  
Production Regime

The article analyzes the dynamics of consumption of primary energy and production of electrical energy in the world for 1973-2012 and the volume of renewable energy. It is shown that in the crisis year of 20 0 9 there was a significant reduction in primary energy consumption and production of electrical energy. At the same time, renewable energy has developed rapidly, well above the rate of the world economy growth. The development of renewable energy is one of the most effective ways out of the crisis, taking into account its production regime, energy, environmental, social and economic efficiency. The forecast for the development of renewable energy for the period up to 2020, compiled by the IEA, is analyzed. It is shown that its assessment rates are conservative; the authors justify higher rates of development of renewable energy.

Saving Primary Energy Consumption Through Exergy Analysis of Combine Distillation and Power Plant

2012 ◽  
Vol 9 (2) ◽  
pp. 65
Author(s):  
Alhassan Salami Tijani ◽  
Nazri Mohammed ◽  
Werner Witt
Keyword(s):  
Energy Consumption ◽  
Power Plant ◽  
Heat Pump ◽  
Heat Recovery ◽  
Energy Savings ◽  
Primary Energy ◽  
Heat Pumps ◽  
Saturated Steam ◽  
Distillation Unit ◽  
Primary Energy Consumption

Industrial heat pumps are heat-recovery systems that allow the temperature ofwaste-heat stream to be increased to a higher, more efficient temperature. Consequently, heat pumps can improve energy efficiency in industrial processes as well as energy savings when conventional passive-heat recovery is not possible. In this paper, possible ways of saving energy in the chemical industry are considered, the objective is to reduce the primary energy (such as coal) consumption of power plant. Particularly the thermodynamic analyses ofintegrating backpressure turbine ofa power plant with distillation units have been considered. Some practical examples such as conventional distillation unit and heat pump are used as a means of reducing primary energy consumption with tangible indications of energy savings. The heat pump distillation is operated via electrical power from the power plant. The exergy efficiency ofthe primary fuel is calculated for different operating range ofthe heat pump distillation. This is then compared with a conventional distillation unit that depends on saturated steam from a power plant as the source of energy. The results obtained show that heat pump distillation is an economic way to save energy if the temperaturedifference between the overhead and the bottom is small. Based on the result, the energy saved by the application of a heat pump distillation is improved compared to conventional distillation unit.

scholarly journals Energy Retrofitting Opportunities Using Renewable Materials—Comparative Analysis of the Current Frameworks in Bosnia-Herzegovina and Slovenia

2021 ◽  
Vol 13 (2) ◽  
pp. 603
Author(s):  
Darija Gajić ◽  
Slobodan Peulić ◽  
Tim Mavrič ◽  
Anna Sandak ◽  
Črtomir Tavzes ◽  
...  
Keyword(s):  
Developing Countries ◽  
Residential Buildings ◽  
Cost Effective ◽  
Primary Energy ◽  
Low Carbon ◽  
Resource Exploitation ◽  
Renewable Materials ◽  
Building Stock ◽  
Low Carbon Economy ◽  
Eu Member States

Sustainable approaches for retrofitting buildings for energy efficiency are becoming necessary in a time when the building sector is the largest energy consumer. Retrofitting building stock is effective for reducing global energy consumption and decreasing resource exploitation. Less developed EU member states and neighboring developing countries show reluctance towards healthy and renewable materials. Implementation of sustainable materials for energy retrofitting is slowed down due to gaps in legislation and effective strategic programs, availability of bio-based materials, lack of knowledge regarding use and maintenance of renewable products, and marketing lobbies. Use of bio-based materials in refurbishment is important due to their negative or low global warming potential (GWP), low primary energy (PEI) need for production, cost-effective benefits, and recycling/reuse potential. Role of environmentally friendly solutions and low-carbon economy growth is particularly relevant in developing countries, such as Bosnia-Herzegovina, that cannot afford innovative energy recovery systems, yet possess a significant amount of poorly managed building stock. This research aims to analyze frameworks regarding retrofitting of residential buildings in Bosnia-Herzegovina and Slovenia. The analysis tackles indirect causes, studies the legal background, and examines strategic frameworks; thus, it indicates potential barriers for implementation of recommended retrofitting solutions based on renewable materials.

scholarly journals Production of Biodiesel from Nyamplung (Calophyllum inophyllum L.) using Microwave with CaO Catalyst from Eggshell Waste: Optimization of Transesterification Process Parameters

2019 ◽  
Vol 17 (1) ◽  
pp. 1185-1197 ◽  
Author(s):  
Ansori Ansori ◽  
Sasmitha Ayu Wibowo ◽  
Heri Septya Kusuma ◽  
Donny Satria Bhuana ◽  
Mahfud Mahfud
Keyword(s):  
Microwave Power ◽  
Fossil Fuel ◽  
Energy Resource ◽  
Modern Method ◽  
Primary Energy ◽  
Biodiesel Production ◽  
Box Behnken Design ◽  
Calophyllum Inophyllum ◽  
Fuel Resource ◽  
Eggshell Waste

AbstractFossil fuel is the main energy resource in Indonesia with oil as the dominant fuel (44.1% of primary energy consumption) in 2017. But fossil fuel is not environmentally friendly and non-renewable. Thus, there is a need for alternative renewable fuels such as biodiesel. Biodiesel from nyamplung (Calophyllum inophyllum L.) oil can provide a promising future as a renewable fuel resource. The used of CaO catalyst from eggshell waste is also profitable, and microwave radiation can help the biodiesel production process run more effectively. Optimization of parameters such as microwave power, catalyst concentration, and transesterification time was performed by using Box-Behnken design. Combinations between biodiesel production from nyamplung oil with CaO catalyst using microwave and treated with Box-Behnken design is considered a new and modern method with optimization of the parameters which affect the transesterification process. The result showed that at a microwave power of 325.24 W, a concentration of catalyst of 3.88%, and a transesterification time of 12.47 min can produce an optimal yield of biodiesel of 98.9079% with the reliability of 92.37%.

Sign in / Sign up

Export Citation Format

Share Document